| 2289 - 2296 |
Maleic Anhydride/Styrene Melt Grafting and Crosslinking onto Ethylene-Octene Copolymer
Chen XL, Wu H, Yu J, Guo SY, Luo Z |
| 2297 - 2304 |
Crystal Structure and Orientation Behavior of Transversely Compressed Poly(ethylene-co-1-octene) Filaments
Shan HF, White JL |
| 2305 - 2316 |
A Robust Shock and Noise Model for the Manufacturing of Molded LDPE Foams
Chedly S, Chettah A, Bonnefoy H, Ichchou MN |
| 2317 - 2328 |
Characterizing the Nonlinear Viscoelastic Properties of Sealant, Including Its Mullins Effect
White CC, Hunston DL |
| 2329 - 2334 |
An Optical Investigation of High-Tenacity Polyester (H-T PET) Fibers Annealed at Different Temperatures
El-Dessouky HM, Mahmoudi MR, Yassien KM, Lawrence CA |
| 2335 - 2339 |
Effect of Crystallite Size on the Deformation and Fracture of Poly(vinylidene fluoride-trifluorethylene) Ferroelectric Copolymer Films Under Uniaxial Tension
Fang F, Yang W, Jia C, Zhang FC |
| 2340 - 2353 |
Modeling Contraction Flows and Swell of Polymer Melts Extruded From Dies of Various Lengths
Jeong JH, Leonov AI |
| 2354 - 2361 |
Melting Behavior and Isothermal Crystallization Kinetics of Nylon 11/EVOH/Dicumyl Peroxide Blends
Wang BB, Ding ZY, Hul GS |
| 2362 - 2366 |
The Effects of Spinning Conditions on the Morphology of Electrospun Jet and Nonwoven Membrane
Li N, Qin XH, Lin L, Wang SY |
| 2367 - 2372 |
Direct Patterning of Polystyrene-Polymethyl Methacrylate Copolymer by Means of Laser Interference Lithography Using UV Laser Irradiation
Lasagni AF, Acevedo DF, Barbero CA, Mucklich F |
| 2373 - 2381 |
Preparation of Nanocomposites Based on PP and PA6 by Direct Injection Molding
Frache A, Monticelli O, Ceccia S, Brucellaria A, Casale A |
| 2382 - 2388 |
Studies on Epoxy Blends Modified With a Hyperbranched Polyester
Cicala G, Recca G |
| 2389 - 2399 |
Control of Morphology of Sulfonated Syndio-Polystyrene Membranes Through Constraints Imposed by Siloxane Networks
Lavorgna M, Fusco L, Piscitelli F, Mensitieri G, Agoretti P, Borriello A, Mascia L |
| 2400 - 2409 |
Probing the Viscoelastic Properties of Brominated Isobutylene-co-p-Methyl styrene Rubber/Tackifier Blends Using a Rubber Process Analyzer
Kumar KD, Gupta S, Sharma BB, Tsou AH, Bhowmick AK |
| 2410 - 2417 |
Use of Carboxylated Nitrile Rubber and Natural Rubber Blends as Retreading Compound for OTR Tires
Pal K, Das T, Pal SK, Das CK |
| 2418 - 2425 |
Effect of Thermomechanical History on the Crystallization of Poly(ether-block-amide)
Tavernier B, Mewis J, Van Puyvelde P, Takenaka M, Ernst B, Hashimoto T |
| 2426 - 2431 |
Study on Flame Retardance of Co-Microencapsulated Ammonium Polyphosphate and Dipentaerythritol in Polypropylene
Wang ZZ, Wu K, Hu Y |
| 2432 - 2438 |
Study on the Cell Structure and Compressive Behavior of Biodegradable Poly(epsilon-caprolactone) Foam
Liu H, Han CY, Dong LS |
| 2439 - 2445 |
Property Modulation of Poly(N-isopropylacrylamide) Hydrogels by Incorporation of Modified Silica
Ham MJ, Kim YH |
| 2446 - 2453 |
Chemorheological Characterization of Thermosetting Polyurethane Formulations Containing Different Chain Extender Contents
Haddadi H, Nazockdast E, Ghalei B |
| 2454 - 2458 |
Stretching-Induced beta-Crystal of iPP: Influence of Stretching Ratio
Shen CY, Zhou YG, Zheng GQ, Liu CT, Chen JB, Li Q |
| 2459 - 2473 |
The Effect of Clay Dispersion on the Properties of LLDPE/LLDPE-g-MAH/Montmorillonite Nanocomposites
Stoeffler K, Lafleur PG, Denault J |
| 2474 - 2481 |
Thermal Conductivity of Polymer Nanocomposites Made With Carbon Nanofibers
Agarwal S, Khan MMK, Gupta RK |
| 2482 - 2498 |
Interfacial Slip-Stick Transition Induced by Reactive Compatibilization in Ethylene-co-butyl Acrylate Elastomer Dispersed Polyamide 6 Blend Subjected to High Shear Flow and Extensional Flow
Balamurugan GP, Maiti SN |
