| 2353 - 2359 |
Effects of Filler Contents and Processing Parameters on the Weldline Strength of Compression Molded Natural Rubber
Patcharaphun S, Chookaew W, Tungkeunkunt T, Na-Ranong N |
| 2360 - 2369 |
Membrane Color and Gas Permeability of 6FDA-TeMPD Polyimide Membranes Prepared With Various Membrane Preparation Protocols
Kanehashi S, Sato S, Nagai K |
| 2370 - 2380 |
Improvement in Toughness and Crystallization of Poly(L-lactic acid) by Melt Blending with Poly(epichlorohydrin-co-ethylene oxide)
Zhang KY, Ran XH, Wang XM, Han CY, Han LJ, Wen X, Zhuang YG, Dong LS |
| 2381 - 2386 |
Rheological Properties of Cotton Pulp Cellulose Dissolved in 1-Butyl-3-Methylimidazolium Chloride Solutions
Liu Z, Wang H, Li ZX, Lu XM, Zhang XP, Zhang SJ, Zhou KB |
| 2387 - 2397 |
Effect of Nanoclay Addition on the Foaming Behavior of Linear Polypropylene-Based Soft Thermoplastic Polyolefin Foam Blown in Continuous Extrusion
Zhai WT, Park CB |
| 2398 - 2407 |
Co-injection Molding of Immiscible Polymers: Skin-Core Structure and Adhesion Studies
Gomes M, Martino D, Pontes AJ, Viana JC |
| 2408 - 2416 |
A General Quantitative Structure-Property Relationship Treatment for Dielectric Constants of Polymers
Xu J, Wang L, Liang GJ, Wang LX, Shen XL |
| 2417 - 2424 |
Removal of Methylene Blue Dyes From Wastewater Using Cellulose-Based Superadsorbent Hydrogels
Zhou YM, Fu SY, Liu H, Yang SP, Zhan HY |
| 2425 - 2433 |
Morphology Prediction and the Effect of Core-Shell Structure on the Rheological Behavior of PP/EPDM/HDPE Ternary Blends
Li LP, Yin B, Yang MB |
| 2434 - 2438 |
On the Differences in Micro-deformation Mechanism Between Isotactic Polypropylene and beta-Nucleated Isotactic Polypropylene as Revealed by the Confocal Laser Scanning Microscopy
Jancar J, Kalfus J, Balkova R |
| 2439 - 2445 |
Interpenetrating Polymer Network of Blocked Polyurethane and Phenolic Resin. II. Kinetic Formation, Swelling Ratio, Thermal Properties, and Flame Retardance
Chen CH |
| 2446 - 2452 |
Effect of Extensional Properties of Polymer Solutions on the Droplet Formation via Ultrasonic Atomization
Kim Y, Kim H |
| 2453 - 2464 |
Preparation and Properties of Porous Poly(Sodium Acrylate-co-Acrylamide) Salt-Resistant Superabsorbent Composite
Chen ZB, Dong F, Liu MZ, Qi XH |
| 2465 - 2472 |
Effect of Tackifiers on Mechanical and Dynamic Properties of Carbon-Black-Filled NR Vulcanizates
Thaijaroen W |
| 2473 - 2482 |
Micellar Polymerization, Characterization, and Viscoelasticity of Combined Thermally Insensitive Terpolyacrylamides
Rodriguez FP, Jimenez-Regalado EJ |
| 2483 - 2489 |
Styrene-Assisted Grafting of Maleic Anhydride Onto Isotactic Poly butene-1
Zhao YX, Ma YJ, Yao W, Huang BC |
| 2490 - 2494 |
Elongation Properties of Polyethylene Melts
Liang JZ, Zhong L |
| 2495 - 2504 |
Process Modeling for the Synthesis of Unsaturated Polyester
Shah M, Zondervan E, de Haan AB |
| 2505 - 2516 |
The Supermolecular Structure of Isotactic Polypropylene/Atactic Polystyrene Blends
Borysiak S |
| 2517 - 2525 |
Shrinkage Alteration Induced by Segregation of Glass Beads in Injection Molded PA6: Experimental Analysis and Modeling
Kovacs JG |
| 2526 - 2534 |
Nonisothermal Crystallization Behaviors and Conductive Properties of PEO-Based Solid Polymer Electrolytes Containing Yttrium Oxide Nanoparticles
Liang GJ, Xu J, Xu WL, Shen XL, Bai ZK, Yao M |
| 2535 - 2541 |
Nonisothermal Crystallization Behavior of Biodegradable Poly(Butylene Terephthalate-co-Butylene Adipate-co-Ethylene Terephthalate-co-Ethylene Adipate) Copolyester
Wang XH, Shi J, Chen Y, Shi Y, Fu ZF |
| 2542 - 2551 |
Improving the Predictions of Injection Molding Simulation Software
Vietri U, Sorrentino A, Speranza V, Pantani R |
| 2552 - 2563 |
Ultradrawing Properties of Ultrahigh-Molecular Weight Polyethylene/Functionalized Carbon Nanotube Fibers and Transmittance Properties of Their Gel Solutions
Yeh JT, Wu TW, Lai YC, Li QC, Zhou HP, Zhou Q, Tsou CH, Shu YC, Huang CY, Huang KS |
| 2564 - 2570 |
Tensile Properties of Microbial beta-Glucan Films
Blahovec J, Hejlova A, Copikova J, Novak M |
| 2571 - 2577 |
Sheet Bowing in Thermoforming
Vodak PB, Mix AW, Giacomin AJ |
