| 497 - 510 |
Kinetics of Isothermal and Nonisothermal Crystallization of Novel Poly(Arylene Ether Ether Sulfide)S
Srinivas S, Babu JR, Riffle JS, Wilkes GL |
| 511 - 518 |
The Working Domain in Reactive Extrusion .1. The Effect of the Polymer Melt Viscosity
Vandergoot AJ, Hettema R, Janssen LP |
| 519 - 528 |
The Working Domain in Reactive Extrusion .2. The Effect of the Polymerization Rate
Vandergoot AJ, Klaassens SA, Janssen LP |
| 529 - 540 |
Mathematical-Modeling and Computer-Simulations of the Flow, Nematic Phase Orientation, and Heat-Transfer in Thermotropic Liquid-Crystalline Polymers
Lekakou C |
| 541 - 548 |
Aromatic Copolyester Thermosets - High-Temperature Adhesive Properties
Frich D, Economy J, Goranov K |
| 549 - 558 |
Aliphatic/Aromatic Copolyester Thermoset Adhesives - Synthesis and Characterization
Shi FF, Economy J |
| 559 - 567 |
Finite-Element Analysis for the Flow Characteristics Along the Thickness Direction in Injection-Molding
Lee HS |
| 568 - 575 |
Nonisothermal Melt and Cold Crystallization Kinetics of Poly(Aryl Ether Ether Ketone Ketone)
Liu TX, Mo ZS, Wang SG, Zhang HF |
| 576 - 589 |
Simulation of Thermal-Degradation, Peroxide-Induced Degradation, and Maleation of Polypropylene in a Modular Co-Rotating Twin-Screw Extruder
Kim B, White JL |
| 590 - 602 |
Numerical-Analysis of Injection-Molding of Glass-Fiber-Reinforced Thermoplastics .1. Injection Pressures and Flow
Greene JP, Wilkes JO |
| 603 - 614 |
Properties of Poly(Butylene Terephthalate)/Functionalized Polyolefin Blends
Kang TK, Kim Y, Kim G, Cho WJ, Ha CS |
| 615 - 622 |
Experimental-Study on Distributive Mixing Characteristics of a New-Type of Pin Mixing Section
Yao WG, Takahashi K, Koyama K, Dai GC |
| 623 - 635 |
Simulation of Linear Viscoelastic Flow Behavior in the Buss-Kneader
Lyu MY, White JL |
| 636 - 639 |
The Effect of Temperature on the Interfacial-Tension of Polycarbonate/Polyethylene Blends
Pham HT, Carriere CJ |
| 640 - 645 |
Interferometric Measurement of the Apparent Longitudinal Electrostrictive Effect in Isotactic Polypropylene
Kloos G |
| 646 - 652 |
Reactive Extrusion of in-Situ Composite Based on Pet and Lcp Blends
Hong SM, Hwang SS, Seo Y, Chung IJ, Kim KU |
| 653 - 666 |
Investigation of Composite-Materials Selection and Joint Layout Design to Enhance EMI Shielding of Electronic Equipment
Mottahed BD, Manoochehri S |
| 667 - 671 |
Polymer Flow Length Simulation During Injection Mold Filling
Buchmann M, Theriault R, Osswald TA |
