| 819 - 825 |
Acetic Acid/Water Separation by Pervaporation With Silica Filled PDMS Membrane
Hong HS, Chen LX, Zhang QW, Zhang ZR |
| 826 - 834 |
Thermal, Morphological, and Mechanical Properties of Biobased and Biodegradable Blends of Poly(lactic acid) and Chemically Modified Thermoplastic Starch
Shin BY, Jang SH, Kim BS |
| 835 - 842 |
Formation and Morphology Development of Poly(butylene terephthalate) Nanofibers from Poly(butylene terephthalate)/Cellulose Acetate Butyrate Immiscible Blends
Li MF, Xiao R, Sun G |
| 843 - 850 |
Examination of Starch Preprocess Drying and Water Absorption of Injection-Molded Starch-Filled Poly(lactic acid) Products
Kovacs JG, Tabi T |
| 851 - 861 |
Flow-Induced Crystallization During Isotactic Polypropylene Film Casting
Lamberti G |
| 862 - 874 |
Core-Shell Structured Ferrite-Silsesquioxane-Epoxy Nanocomposites: Composite Homogeneity and Mechanical and Magnetic Properties
Olsson RT, Hedenqvist MS, Strom V, Deng J, Savage SJ, Gedde UW |
| 875 - 883 |
Fire Retardant Properties of Intumescent Polypropylene Composites Filled With Calcium Carbonate
Isitman NA, Dogan M, Bayramli E, Kaynak C |
| 884 - 893 |
Synthesis and Properties of Photosensitive Poly(urethane-acrylate) Containing Anil Groups With Application in the Chemosensors Area
Buruiana EC, Jitaru F, Hitruc G, Buruiana T |
| 894 - 901 |
Point-Bonded Electrospun Polystyrene Fibrous Mats Fabricated via the Addition of Poly(butylacrylate) Adhesive
Park DK, Park SJ, Baek WI, Kanjwa MA, Kim HY |
| 902 - 907 |
Mechanical Properties and Deformation Behaviors of Acrylonitrile-Butadiene-Styrene Under Izod Impact Test and Uniaxial Tension at Various Strain Rates
Xu XY, Xu XF |
| 908 - 916 |
Preparation and Characterization of Polylactide-block-Poly(butylene adipate) Polyurethane Thermoplastic Elastomer
Zhong Q, Ren J, Wang QF |
| 917 - 924 |
Thermal and Dielectric Properties of the Aluminum Particle Reinforced Linear Low-Density Polyethylene Composites
Zhou WY |
| 925 - 930 |
Effect of Perfluoroalkylmethacrylate Ester-grafted-Linear Low-Density Polyethylene on the Tribological Property of Polyoxymethylene-Linear Low-Density Polyethylene Composites
He JQ, Zhang L, Li CZ |
| 931 - 939 |
The Effect of a Sodium Octacosanoate-Based Nucleating Agent on the Crystallization of Thermoplastic Polyurethanes
Freitag CPM, Riegel IC, Pezzin SH, Costa ML, Amico SC |
| 940 - 947 |
Coating of Structured Catalytic Reactors by Plasma Assisted Polymerization of Tetramethyldisiloxane
Essakhi A, Mutel B, Supiot P, Lofberg A, Paul S, Le Courtois V, Meille V, Pitault I, Bordes-Richard E |
| 948 - 958 |
Effects of Carbon Nanofibers on the Fracture, Mechanical, and Thermal Properties of PP/SEBS-g-MA Blends
Liao CZ, Tjong SC |
| 959 - 968 |
Replication Characterization in Injection Molding of Microfeatures With High Aspect Ratio: Influence of Layout and Shape Factor
Yang C, Huang HX, Castro JM, Yi AY |
| 969 - 978 |
Effect of Processing Procedures and Conditions on Structural, Morphological, and Rheological Properties of Polyethylene/Polyamide/Nanoclay Blends
Mederic P, Ville J, Huitric J, Moan M, Aubry T |
| 979 - 991 |
Effect of Blend Composition and Organoclay Loading on the Nanocomposite Structure and Properties of Miscible Poly(methyl methacrylate)/Poly(styrene-co-acrylonitrile) Blends
Tiwari RR, Natarajan U |
| 992 - 1003 |
Properties of Microinjection Molding of Polymer Multiwalled Carbon Nanotube Conducting Composites
Abbasi S, Derdouri A, Carreau PJ |
| 1004 - 1013 |
Melting and Crystallization Behavior of Copolymer From Cyclic Butylene Terephthalate and Polycaprolactone
Wu CM, Huang CW |
| 1014 - 1022 |
The Effects of Nanoclay on the Extrusion Foaming of Wood Fiber/Polyethylene Nanocomposites
Lee YH, Kuboki T, Park CB, Sail M |
