| 1197 - 1197 |
Second International Symposium on Polymeric Nanocomposites held at the Industrial Materials Institute of the National Research Council of Canada - October 6-8, 2003 - Preface
Utracki LA, Cole KC |
| 1198 - 1204 |
Characteristics of polystyrene/polyethylene/clay nanocomposites prepared by ultrasound-assisted mixing process
Ryu JG, Kim H, Lee JW |
| 1205 - 1211 |
Development of a new production method for a polypropylene-clay nanocomposite
Kato M, Matsushita M, Fukumori K |
| 1212 - 1219 |
Polyolefin nanocomposites: Formulation and development
Ton-That MT, Perrin-Sarazin F, Cole KC, Bureau MN, Denault J |
| 1220 - 1230 |
Morphology of EVA based nanocomposites under shear and extensional flow
Prasad R, Pasanovic-Zujo V, Gupta RK, Cser F, Bhattacharya SN |
| 1231 - 1239 |
Influence of the initiation rate on the polymerization kinetics of hydroxy ethyl methacrylate (HEMA) filled with HEMA-grafted silica preformed nanoparticles
Kaddami H, Pascault JP, Gerard JF |
| 1240 - 1246 |
Hybrid organic inorganic nylon-6/SiO2 nanocomposites: Transport properties
Garcia M, Barsema J, Galindo RE, Cangialosi D, Garcia-Turiel J, Van Zyl WE, Verweij H, Blank DHA |
| 1247 - 1257 |
Dispersion, temperature and torque models for an internal mixer
Campanelli JR, Gurer C, Rose TL, Varner JE |
| 1258 - 1266 |
Modeling of polymer melting, drop deformation, and breakup under shear flow
Chen HB, Sundararaj U, Nandakumar K |
| 1267 - 1276 |
Comparison of the dynamic thin shell and quasi-cylindrical models for blown film extrusion
Pirkle JC, Braatz RD |
| 1277 - 1282 |
Photo polymerization of acrylamide onto calcium carbonate particle surfaces and filled nylon-6
Gao J, He GJ, Le JX, Li QM |
| 1283 - 1294 |
Shear field induced diffusion and molecular weight fractionation during polymer processing
Shelby MD, Caflisch GB |
| 1295 - 1312 |
Computational prediction of PVC degradation during injection molding in a rectangular channel
Garcia JL, Koelling KW, Summers JW |
| 1313 - 1318 |
An experimental study of solid-bed break-up in plasticization of a reciprocating-screw injection molding
Jin ZM, Gao FR, Zhu FH |
| 1319 - 1327 |
Environmental stress cracking of a chemical nature in a PBT/PBA co-poly(ester ester)
Kuipers NB, Riemslag AC, Lange RFM, Janssen M, Bakker A, Marissen R |
| 1328 - 1337 |
On the effect of pressure on the shear and elongational viscosities of polymer melts
Sedlacek T, Zatloukal M, Filip P, Boldizar A, Saha P |
| 1338 - 1350 |
Rubber plasticizers from degraded/devulcanized scrap rubber: A method of recycling waste rubber
Tripathy AR, Williams DE, Farris RJ |
| 1351 - 1359 |
Free volume changes in mechanically milled PS and PC studied by positron annihilation lifetime spectroscopy (PALS)
Gunther-Schade K, Castricum HL, Ziegler HJ, Bakker H, Faupel F |
| 1360 - 1367 |
Uniaxial stretching of poly(keto-ether-imide) films
Hinkley JA, Dezern JF, Feuz L, Klinedinst D |
| 1368 - 1378 |
Simulation of PTFE sintering: Thermal stresses and deformation behavior
Andena L, Rink M, Polastri F |
| 1379 - 1390 |
A non-isothermal finite element model for injection stretch-blow molding of PET bottles with parametric studies
Yang ZJ, Harkin-Jones E, Menary GH, Armstrong CG |
| 1391 - 1402 |
Experiments and flow analysis of a micropelletizing die
Thompson MR, Xi C, Takacs E, Tate M, Vlachopoulos J |
| 1403 - 1403 |
A study on the effects of chaotic mixer design and operating conditions on morphology development in immiscible polymer systems (vol 44, pg 407, 2004)
Sau M, Jana SC |
