| 1359 - 1365 |
The crystalline phase transformation of poly(vinylidene fluoride) poly(vinyl fluoride) blend films
Kim BS, Lee JY, Porter RS |
| 1366 - 1377 |
Residence time distributions and basic studies of flow and melting in a modular Buss Kneader
Lyu MY, White JL |
| 1378 - 1386 |
Selective froth flotation of PVC from PVC/PET mixtures for the plastics recycling industry
Drelich J, Payne T, Kim JH, Miller JD |
| 1387 - 1398 |
New models for rotational molding of plastics
Gogos G, Olson LG, Liu X, Pasham VR |
| 1399 - 1412 |
Experimental study and numerical simulation of the injection stretch/blow molding process
Schmidt FM, Agassant JF, Bellet M |
| 1413 - 1419 |
Environmental stress cracking resistance of blends of high-density polyethylene with other polyethylenes
Schellenberg J, Fienhold G |
| 1420 - 1425 |
Ethylene vinyl alcohol copolymer high density polyethylene blends compatibilized through functionalization
Park SH, Lee GJ, Im SS, Suh KD |
| 1426 - 1435 |
Steady shear and dynamic properties of biodegradable polyesters
Ramkumar DHS, Bhattacharya M |
| 1436 - 1442 |
Evaluation of rheological properties of non-Newtonian fluids in internal mixers: An alternative method based on the power law model
Mallette JG, Soberanis RR |
| 1443 - 1449 |
Structural rearrangements during yielding of glassy polymers
Kontou E, Spathis G |
| 1450 - 1462 |
Optimal cooling system design for the injection molding process
Park SJ, Kwon TH |
| 1463 - 1470 |
Comparison of isotactic and syndiotactic polypropylene as matrix materials of hybrid composites
Stricker F, Mulhaupt R |
| 1471 - 1481 |
Characterizations for blends of phosphorus-containing copolyester with poly(ethylene terephthalate)
Chang SJ, Chang FC |
| 1482 - 1490 |
Effects of polyethylenes on the morphology, barrier, and impact properties of polyethylene modified polyamide blends
Yeh JT, Jyan CF |
| 1491 - 1505 |
Liquid-crystallization induced reactions. Microstructure and morphology of copolyesters synthesized by transesterification of PET with some LCP monomers
Tonti MS, Masseti M, Poli G, Paci M, Magagnini P, Forte C, Veracini CA |
| 1506 - 1522 |
Experimental study and computer simulation of the effect of spider shape on the weld-lines in extruded plastic pipe
Huang Y, Prentice P |
| 1523 - 1528 |
The effect of temperature on the observed flow-induced structure in semidilute solutions of gently solubilized starches
Carriere CJ, Loffredo AR |
| 1529 - 1535 |
Indentation measurements using a dynamic mechanical analyzer
Payne JA, Strojny A, Francis LF, Gerberich WW |
| 1536 - 1548 |
The interfacial tension between a thermotropic liquid crystalline copolyester and polyethersulfone: A comparison of methods
Machiels AGC, Busser RJ, Van Dam J, De Boer AP |
| 1549 - 1558 |
Measurement of three-dimensional velocity field in the translational region of a co-rotating twin-screw extruder
Bakalis S, Karwe MV |
| 1559 - 1565 |
Chain orientation in sheared molten poly(ethylene oxide) fractions by measurement of infrared dichroism
Skytt ML, Jansson JF, Gedde UW |
| 1566 - 1571 |
In-process control of epoxy composite by microdielectrometric analysis. Part II: On-line real-time dielectric measurements during a compression molding process
Stephan F, Duteurtre X, Fit A |
| 1572 - 1586 |
Phase behavior of blends of poly(ethylene terephthalate) with liquid-crystalline polymers
Magagnini P, Tonti MS, Masseti M, Paci M, Minkova LI, Miteva TT |
| 1587 - 1593 |
Experimental study of the transcription of minute width grooves by injection molding (II)
Yoshii M, Kuramoto H, Ochiai Y |
| 1594 - 1610 |
Isothermal and non-isothermal crystallization kinetics of polyethylene terephthalate: Mathematical modeling and experimental measurement
Verhoyen O, Dupret F, Legras R |
