| 1809 - 1822 |
Mechanical and crystalline properties of monomer casting Nylon-6/Sio(2) composites prepared via in situ polymerization
Xu S, Zhao XW, Ye L |
| 1823 - 1827 |
Estimation of tensile strength of inorganic plate-like particulate reinforced polymer composites
Liang JZ |
| 1828 - 1838 |
Mixed monolayers of pmas with poly(styrene-b-methyl methacrylate) at the air/water interface
Su HK, Hsu WP |
| 1839 - 1844 |
Reuse of cured epoxy as a reinforcement in an epoxy composite
Mohan TP, Kanny K |
| 1845 - 1855 |
Effect of EPDM-g-MAH on the morphology and properties of PA6/EPDM/HDPE ternary blends
Zhou Y, Wang W, Dou R, Li LP, Yin B, Yang MB |
| 1856 - 1863 |
Experimental studies for stability of ferroelectric phase in potassium nitrate composite films
Kumar N, Nath R |
| 1864 - 1870 |
Dielectric analysis of alpha-relaxation process of chlorinated poly(vinyl chloride) stabilized with nitro-phenyl maleimide
Hanafy TAM, Mahrous S |
| 1871 - 1877 |
Low-temperature cure high-performance cyanate ester resins/microencapsulated catalyst systems
Chen F, Yuan L, Gu AJ, Lin C, Liang GZ |
| 1878 - 1885 |
Effect of coating method on gas separation by PDMS/PES membrane
Madaeni SS, Badieh MMS, Vatanpour V |
| 1886 - 1900 |
Instability of styrene/polystyrene/polybutadiene/polystyrene-b-polybutadiene emulsions that emulate styrene polymerization in the presence of polybutadiene
Velasquez E, Oliva H, Muller AJ, Lopez JV, Vega J, Meira GR, Wambach M |
| 1901 - 1909 |
On thermal conductivity of micro- and nanocellular polymer foams
Sundarram SS, Li W |
| 1910 - 1919 |
Ultrahigh molecular weight polyethylene fibers prepared using conical dies with varying dimensions
Yeh JT, Wang CK, Zhou Q, Zhou HP, Tsai CC, Lai YC, Tsou CH, Chen KN, Huang CY, Lee KC |
| 1920 - 1926 |
A stochastic approach for continuous and discontinuous crack growth in polycarbonate under cyclic loading
Matsuda S, Ogi K |
| 1927 - 1936 |
Tailoring the crystalline structure of polypropylene parts molded through water-assisted injection molding: Effects of melt temperature and polymeric nucleating agent
Wang B, Huang HX |
| 1937 - 1946 |
Improving the mechanical properties of laser-sintered polyamide 12 through incorporation of carbon nanotubes
Bai JM, Goodridge RD, Hague RJM, Song M |
| 1947 - 1957 |
Organomodification of montmorillonite and its effects on the properties of poly(butylene succinate) nanocomposites
Phua YJ, Chow WS, Ishak ZAM |
| 1958 - 1967 |
Investigation of third-order nonlinear optical properties of pyrazoline-doped polyvinyl alcohol films
Janardhana K, Ravindrachary V, Kumar PCR, Ismayil |
| 1968 - 1978 |
Adhesion performance and surface characteristics of low surface energy psas fluorinated by UV polymerization
Bae KY, Lim DH, Park JW, Kim HJ, Jeong HM, Takemura A |
| 1979 - 1989 |
Development, characterization, and modeling of environmentally friendly open-cell acoustic foams
Mosanenzadeh SG, Naguib HE, Park CB, Atalla N |
| 1990 - 1995 |
High polymer/surfactant ratio in the seeded semicontinuous heterogeneous polymerization of vinyl acetate
Martinez-Gutierrez H, Ovando-Medina VM, Peralta RD, Mendizabal E, Puig JE |
| 1996 - 2003 |
Effect of phase morphology and interfacial strength on barrier properties of high density polyethylene/polyamide 6 membranes
Lei F, Du Q, Li T, Li J, Guo SY |
| 2004 - 2017 |
Three-dimensional multielectrode-controlled two orthogonal direction bendable IPMC actuator with an active clasp
Feng GH, Tsai JW |
| 2018 - 2026 |
Extrusion with ultrasound applied on intumescent flame-retardant polypropylene
Sanchez-Olivares G, Sanchez-Solis A, Calderas F, Medina-Torres L, Herrera-Valencia EE, Rivera-Gonzaga A, Manero O |
| 2027 - 2033 |
Preparation, characterization, and properties of polyacrylonitrile-silica gel anion exchange composite fibers
Khan AA, Baig U |
