| 1 - 3 |
The investigation of one step annealing for plated Ni/Cu contact solar cells
Lee JD, Kwon HY, Kim MJ, Lee EJ, Lee HS, Lee SH |
| 4 - 10 |
An estimation of the extreme wind speed using the Korea wind map
Lee BH, Ahn DJ, Kim HG, Ha YC |
| V - V |
International Symposium on Low Carbon and Renewable Energy Technology 2010 (ISLCT 2010)
Song J, Lee JS |
| 11 - 22 |
Evaluation of thermal performance of energy textile installed in Tunnel
Lee C, Park S, Won J, Jeoung J, Sohn B, Choi H |
| 23 - 27 |
Thermoelectric properties of a doped Mg2Sn system
An TH, Choi SM, Kim IH, Kim SU, Seo WS, Kim JY, Park C |
| 28 - 35 |
Modeling and voltage-control of variable-speed SCAG-based wind farm
An H, Ko H, Kim H, Kim H, Kim S, Jang G, Lee B |
| 36 - 40 |
Thermoelectric properties of Spark Plasma Sintered InxYbyLa0.3-x-yCo4Sb12 skutterudite system
Lee JK, Choi SM, Seo WS, Lim YS, Lee HL, Kim IH |
| 41 - 45 |
Production of anhydrous ethanol using various PSA (Pressure Swing Adsorption) processes in pilot plant
Jeong JS, Jeon H, Ko KM, Chung B, Choi GW |
| 46 - 53 |
Aerodynamic noise analysis of large horizontal axis wind turbines considering fluid-structure interaction
Kim H, Lee S, Son E, Lee S, Lee S |
| 54 - 59 |
Transient behavior of proton exchange membrane fuel cell under non-isothermal condition
Hwang SS, Lee PH, Jo SH, Cha CL, Hong SW, Han SS, Koo JY |
| 60 - 65 |
Impact of oleic acid on the fermentation of glucose and xylose mixtures to hydrogen and other byproducts
Chaganti SR, Kim DH, Lalman JA |
| 66 - 76 |
Design of a low Reynolds number airfoil for small horizontal axis wind turbines
Singh RK, Ahmed MR, Zullah MA, Lee YH |
| 77 - 83 |
Performance evaluation of closed-loop vertical ground heat exchangers by conducting in-situ thermal response tests
Lee C, Park M, Nguyen TB, Sohn B, Choi JM, Choi H |
| 84 - 89 |
Physical properties and flame characteristics of water electrolysis gas
Kim HG, Kwac LK, Shin JD |
| 90 - 94 |
The effect of operation parameters on the hydrothermal drying treatment
Meng D, Jiang Z, Kunio Y, Mu H |
| 95 - 98 |
Exceeding 19% efficient 6 inch screen printed crystalline silicon solar cells with selective emitter
Lee E, Cho K, Oh D, Shim J, Lee H, Choi J, Kim J, Shin J, Lee S, Lee H |
| 99 - 104 |
Biodiesel production from crude canola oil by two-step enzymatic processes
Jang MG, Kim DK, Park SC, Lee JS, Kim SW |
| 105 - 110 |
Mitigation of flow separation using DBD plasma actuators on airfoils: A tool for more efficient wind turbine operation
Walker S, Segawa T |
| 111 - 117 |
Refrigerant amount detection algorithm for a ground source heat pump unit
Choi H, Cho H, Choi JM |
| 118 - 124 |
Design and performance study of the ground-coupled heat pump system with an operating parameter
Chung JT, Choi JM |
| 125 - 130 |
Effects of operation conditions on pyrolysis characteristics of agricultural residues
Park YK, Yoo ML, Lee HW, Park SH, Jung SC, Park SS, Kim SC |
| 131 - 135 |
Fast pyrolysis characteristics of lignocellulosic biomass with varying reaction conditions
Choi HS, Choi YS, Park HC |
| 136 - 139 |
The spray characteristics of unrefined biodiesel
Choi S, Oh Y |
| 140 - 144 |
Effects of design parameters on aerodynamic performance of a counter-rotating wind turbine
Lee S, Kim H, Son E, Lee S |
| 145 - 151 |
The operation results of a 125 kW molten carbonate fuel cell system
Kim B, Kim DH, Lee J, Kang SW, Lim HC |
| 152 - 156 |
Wind tunnel test results for a 2/4.5 scale MEXICO rotor
Cho T, Kim C |
| 157 - 162 |
Development of algorithm based on the coupling method with CFD and motor test results to predict performance and efficiency of a fuel cell air fan
Kim JH, Hur N, Kim W |
| 163 - 167 |
Gasification and power generation characteristics of rice husk and rice husk pellet using a downdraft fixed-bed gasifier
Yoon SJ, Son YI, Kim YK, Lee JG |
| 168 - 172 |
Wild reed of Suncheon Bay: Potential bio-energy source
Park YK, Yoo ML, Heo HS, Lee HW, Park SH, Jung SC, Park SS, Seo SG |
| 173 - 179 |
Numerical and experimental studies on hydrofoils for marine current turbines
Goundar JN, Ahmed MR, Lee YH |
| 180 - 185 |
A numerical study on anode thickness and channel diameter of anode-supported flat-tube solid oxide fuel cells
Park J, Bae J, Kim JY |
| 186 - 194 |
An innovative design of wave energy converter
Ahn KK, Truong DQ, Tien HH, Yoon JI |
| 195 - 206 |
Performance of horizontal axis tidal current turbine by blade configuration
Jo CH, Yim JY, Lee KH, Rho YH |
| 207 - 211 |
A kinetic assessment of glucose production from pretreated Gelidium amansii by dilute acid hydrolysis
Jeong TS, Kim YS, Oh KK |
| 212 - 216 |
Low temperature steam reforming of methane over Ni-Ce(1-x)Zr(x)O2 catalysts under severe conditions
Roh HS, Eum IH, Jeong DW |
| 217 - 226 |
Wind resource assessment around Korean Peninsula for feasibility study on 100 MW class offshore wind farm
Oh KY, Kim JY, Lee JS, Ryu KW |
| 227 - 233 |
Blade layers optimization of wind turbines using FAST and improved PSO Algorithm
Liao CC, Zhao XL, Xu JZ |
| 234 - 242 |
Analysis of design variables for an efficient natural gas steam reforming process comprised in a small scale hydrogen fueling station
Lee DK, Koo KY, Seo DJ, Yoon WL |
