1 - 5 |
Thermal conductivity as an indicator of fat content in milk Gustavsson M, Gustafsson SE |
6 - 9 |
Evaluation and finite element modeling for new type of thermal material annealed pyrolytic graphite (APG) Zhang SH, Vinson M, Beshenich P, Montesano M |
10 - 13 |
A dynamic system approach to the characterization of a class of rheological materials at base-temperatures Haddad YM, Yu P |
14 - 17 |
Simultaneous measurement of specific heat, thermal conductivity, and thermal diffusivity of modified barium titanate ceramics Morimoto K, Sawai S, Hisano K, Yamamoto T |
18 - 24 |
Thermal properties of poly(ethylene oxide)/lauric acid blends: A SSA-DSC study Pielichowski K, Flejtuch K |
25 - 30 |
Melting and reorganization of the crystalline fraction and relaxation of the rigid amorphous fraction of isotactic polystyrene on fast heating (30,000 K/min) Minakov AA, Mordvintsev DA, Tol R, Schick C |
31 - 34 |
Crystalline polymer: Some reminiscences over the years Mandelkern L |
35 - 41 |
The heat capacity of polyethylene fibers measured by multi-frequency temperature-modulated calorimetry Pyda M, Nowak-Pyda E, Wunderfich B |
42 - 47 |
Evaluation of the reversible contribution to the reversing heat capacity in isotactic polystyrene Xu H, Cebe P |
48 - 51 |
Experimental aspects of temperature-modulated dilatometry of polymers Kamasa P, Myslinski P, Pyda M |
52 - 60 |
Method of rapid (100 000 K s(-1)) controlled cooling and heating of thin samples Merzlyakov M |
61 - 63 |
Application and limitations on thermal and spectroscopic methods for shelf-life prediction Woo LC, Ling MTK, Eu B, Sandford C |
64 - 66 |
Detection of degradation of ABS materials via DSC Blom H, Yeh R, Wojnarowski R, Ling M |
67 - 73 |
Thermo-physical properties of epoxy nanocomposites reinforced by carbon nanotubes and vapor grown carbon fibers Miyagawa H, Rich MJ, Drzal LT |
74 - 77 |
Synthesis, thermal properties and applications of polymer-clay nanocomposites Meneghetti P, Qutubuddin S |
78 - 80 |
Thermal stabilization and plasticization of poly(vinyl chloride) by ester thiols: Update and current status Starnes WH, Du B, Kim S, Zaikov VG, Ge XL, Culyba EK |
81 - 86 |
New elevated temperature mold compound adhesion test method using a dynamic mechanical analyzer Schoenberg A, Klinkerch E |
87 - 91 |
The thermal analysis of films in the 21st century: Relevance to cell culture, biochips and roll-to-roll circuits Jaffe M, Collins G, Menczel J |
92 - 94 |
Thermal analysis of poly(vinylidene fluoride) film Judovits L |
95 - 99 |
The thermal analysis of fibers in the twenty first century: From textile, industrial and composite to nano, bio and multi-functional Jaffe M, Collins G, Menczel J |