5151 - 5151 |
Untitled Zhang S |
5152 - 5156 |
In-vitro cellular behavior on amorphous carbon containing silicon Ong SE, Zhang S, Du HJ, Wang YS, Ma LL |
5157 - 5161 |
Surface adsorption and wetting properties of amorphous diamond-like carbon thin films for biomedical applications Yin Y, Hang L, Xu J, McKenzie DR, Bilek MMM |
5162 - 5167 |
Evaluation of adhesion strength and toughness of fluoridated hydroxyapatite coatings Zhang S, Wang YS, Zeng XT, Khor KA, Weng WJ, Sun DE |
5168 - 5171 |
Fabrication and biocompatibility of polyethyleneimine/heparin self-assembly coating on NiTi alloy Dong P, Hao WC, Wang X, Wang TM |
5172 - 5175 |
An interfacial study of sol-gel-derived magnesium apatite coatings on Ti6Al4V substrates Qi GC, Zhang S, Khor KA, Weng WJ, Zeng XT, Liu CM |
5176 - 5180 |
In vitro effect of magnesium inclusion in sol-gel derived apatite Qi GC, Zhang S, Khor KA, Liu CM, Zeng XT, Weng WJ, Qian M |
5181 - 5188 |
A new fabrication method of low stress PECVD SiNx layers for biomedical applications Wei HS, Ong PL, Tay FEH, Iliescu C |
5189 - 5193 |
Characterisation of silicon carbide films deposited by plasma-enhanced chemical vapour deposition Iliescu C, Chen BT, Wei JS, Pang AJ |
5194 - 5200 |
Effect of improved wettability of silicon-based materials with electrolyte for void free copper deposition in high aspect ratio through-vias Dixit P, Chen XF, Miao JM, Preisser R |
5201 - 5205 |
Electrochemical performance of diamond-like carbon thin films Liu E, Kwek HW |
5206 - 5209 |
Spin-coating derived LSM-SDC films with uniform pore structure Ye F, Wang ZC, Weng WJ, Cheng K, Song CL, Du PY, Shen G, Han GR |
5210 - 5216 |
Determination of alcohols using a Ni-Pt alloy amperometric sensor Huang JJ, Hwang WS, Weng YC, Chou TC |
5217 - 5222 |
Structural and optical studies on ion-implanted 6H-SiC thin films Feng ZC, Lien SC, Zhao JH, Sun XW, Lu W |
5223 - 5226 |
Electric properties and surface characterization of transparent Al-doped ZnO thin films prepared by pulsed laser deposition Kim JP, Lee SA, Bae JS, Park SK, Choi UC, Cho CR |
5227 - 5230 |
Fabrication and characterization of platinum black and mesoporous platinum electrodes for in-vivo and continuously monitoring electrochemical sensor applications Seo HK, Park DJ, Park JY |
5231 - 5235 |
Deposition of a-C : N films and evaluation of their robustness in electrochemical applications Zeng AP, Bilek MMM, McKenzie DR, Lay PA |
5236 - 5240 |
Quantitative limitation of active site and characteristics of chemical oxidized well-aligned carbon nanotubes Hung TC, Chen CF, Chen M, Chen CC |
5241 - 5243 |
Under-layer behavior study of low resistance Ta/TaNx barrier film Wang YS, Hung CC, Lee WH, Chang SC, Wang YL |
5244 - 5247 |
Effect of processing on the properties of Bi3.15Nd0.85Ti3O12 thin films Giridharan NV, Supriya S |
5248 - 5251 |
Structural and electrical characteristics of chemical solution derived (Bi3.2La0.4Nd0.4)Ti3O12 thin films Ruan KB, Wu GH, Liang T, Bao DH |
5252 - 5257 |
Crystallization behavior of Nd-doped SrBi2Ta2O9 thin films prepared by magnetron sputtering Li YB, Zhang S, Fei WD, Wang HL |
5258 - 5261 |
Voltage tunable Ba0.6Sr0.4TiO3 thin films and coplanar phase shifters Fu CL, Cai W, Chen HW, Feng SC, Pan FS, Yang CR |
5262 - 5265 |
Deposition and structural properties of RF magnetron-sputtered ZnO thin films on Pt/Ti/SiNx/Si substrate for FBAR device Lin RC, Kao KS, Cheng CC, Chen YC |
5266 - 5271 |
Effects of ambient oxygen pressures and substrate temperatures in pulsed laser deposited Zn0.85Li0.15O thin films Jun BE, Kim YS, Park HJ, Kim SB, Yang HK, Park JH, Choi BC, Jeong JH |
5272 - 5276 |
Deflection of wafers and cantilevers with Pt/LNO/PZT/LNO/Pt/Ti/SiO2 multilayered structure Kobayashi T, Ichiki M, Noguchi T, Maeda R |
5277 - 5281 |
Fabrication and frequency response of solidly mounted resonators with 1/4 lambda mode configuration Chung CJ, Chen YC, Cheng CC, Kao KS |
5282 - 5286 |
Ferroelectric properties of Pb(Zr,Ti)O-3 films fabricated using a modified sol-gel based process Park SM, Lee SG, Yun SE |
5287 - 5291 |
Densification and electrical properties of solution coated lead zirconate titanate thick films Lee SG, Park SM, Noh HJ, Cho SG, Cho JK |
5292 - 5295 |
Effects of outgassing on the reactive sputtering of piezoelectric AlN thin films Cherng JS, Chang DS |
5296 - 5299 |
Structure and dielectric properties of highly (100)-oriented PST thin films deposited on MgO substrates Li XT, Du PY, Zhu L, Mak CL, Wong KH |
5300 - 5303 |
Preparation of high (100) oriented PST thin films deposited on PT/Tb inducing layer by rf-sputtering method Chen JF, Du PY, Qin Y, Han GR, Weng WJ |
5304 - 5308 |
Electric response as a function of applied voltage of Nb-doped Bi4Ti3O12 thin films Park JH, Bae JS, Park HJ, Kim YS, Jun BE, Choi BC, Jeong JH |
5309 - 5312 |
Piezoelectric properties of PZT films prepared by the sol-gel method and their application in MEMS Xiong S, Kawada H, Yamanaka H, Matsushima T |
5313 - 5317 |
Structural and mechanical properties of titanium and titanium diboride monolayers and Ti/TiB2 multilayers Chu K, Lu YH, Shen YG |
5318 - 5323 |
Comparison of residual stress measurement in thin films using surface micromachining method He Q, Luo ZX, Chen XY |
5324 - 5329 |
Influence of bias voltages on the structure and wear properties of TiSiN coating synthesized by cathodic arc plasma evaporation Chang CL, Lin CT, Tsai PC, Ho WY, Wang DY |
5330 - 5333 |
Effects of ion implantation on the microstructure and residual stress of filter are CrN films Weng KW, Chen YC, Han S, Hsu CS, Chen YL, Wang DY |
5334 - 5338 |
Analyses of interface adhesion between porous SiOCH low-k film and SiCN layers by nanoindentation and nanoscratch tests Chang SY, Tsai HC, Chang JY, Lin SJ, Chang YS |
5339 - 5343 |
Fabrication of optical gratings by shrinkage of a rubber material Shih TK, Ho JR, Liao HY, Chen CF, Liu CY |
5344 - 5348 |
Single-crystal SiC thin-film produced by epitaxial growth and its application to micro-mechanical devices Moronuki N, Kojima M, Kakuta A |
5349 - 5354 |
Transparent conducting Sc-codoped AZO film prepared from ZnO : Al-Sc by RF-DC sputtering Lin JC, Peng KC, Liao HL, Lee SL |
5355 - 5359 |
Modelling of the scratch resistance of particle filled sol-gel coatings on aluminium Nemeth S |
5360 - 5363 |
Hydrogen sensor based on side-polished fiber Bragg gratings coated with thin palladium film Tien CL, Chen HW, Liu WF, Jyu SS, Lin SW, Lin YS |
5364 - 5367 |
Mechanical properties of gradient pulse biased amorphous carbon film Teo EHT, Chua DHC, Lee ML, Ee CL, Lee CK, Tay BK |
5368 - 5375 |
Mechanical properties of amorphous and microcrystalline silicon films Kulikovsky V, Vorlicek V, Bohac P, Stranyanek M, Ctvrtlik R, Kurdyumov A |
5376 - 5380 |
Strain rate sensitivity and Hall-Petch behavior of ultrafine-grained gold wires Chew YH, Wong CC, Wulff F, Lim FC, Goh HM |
5381 - 5385 |
Nanocomposite magnetic films for high-density perpendicular magnetic recording media Qiu LJ, Shi JZ, Piramanayagam SN, Chen JS, Ding J |
5386 - 5392 |
Plasma surface interaction in PACVD and PVD systems during TiAlBN nanocomposite hard thin films deposition Avni R, Fried I, Raveh A, Zukerman I |
5393 - 5396 |
Phase transformation in NiTiHf shape memory alloy thin films Tong YX, Liu Y, Miao JM |
5397 - 5403 |
Corrosion resistant behaviour of DLC films Shanna R, Barhai R, Kumari N |
5404 - 5408 |
Microstructure and tribological behavior of WS2-Ag composite films deposited by RF magnetron sputtering Zheng XH, Tu JP, Lai DM, Peng SM, Gu B, Hu SB |
5409 - 5413 |
Fabrication of Ta(3)N(5)-Ag nanocomposite thin films with high resistivity and near-zero temperature coefficient of resistance Park IS, Park SY, Jeong GH, Na SM, Suh SJ |
5414 - 5418 |
Tribological properties of multilayer DLC/W-DLC films on Si Miki H, Takeno T, Takagi T |
5419 - 5423 |
Bias effect on microstructure and mechanical properties of magnetron sputtered nanocrystalline titanium carbide thin films Wang HL, Zhang S, Li YB, Sun D |
5424 - 5429 |
Surface and mechanical characterization of TaN-Ag nanocomposite thin films Tseng CC, Hsieh JH, Wu W, Chang SY, Chang CL |
5430 - 5434 |
Study of Cu emergence on the surface of TaN-Cu nanocomposite thin films and its effects on tribological property Hsieh JH, Cheng MK, Li C, Chen SH, Chang YG |
5435 - 5439 |
Geometric and electronic changes during interface alloy formation in Cu/Pd bimetal layers Khanuja M, Mehta BR, Shivaprasad SM |
5440 - 5444 |
Evaluation of microstructures and mechanical properties of diamond like carbon films deposited by filtered cathodic arc plasma Tsai PC, Chen KH |
5445 - 5448 |
Electrical and optical properties of ITO : Ca composite thin films for TEOLED cathode Jung WS, Yoon SG, Kang SM, Kim SW, Yoon DH |
5449 - 5453 |
Opto-electronic properties of sputter-deposited Cu2O films treated with rapid thermal annealing Hsieh JH, Kuo PW, Peng KC, Liu SJ, Hsueh JD, Chang SC |
5454 - 5459 |
Effect of the oxygen flow on the properties of ITO thin films deposited by ion beam assisted deposition (IBAD) Meng LJ, Gao JS, Silva RA, Song SG |
5460 - 5464 |
One-step growth of HfSiON films Xia B, Fisher ML, Stemper H, Misra A |
5465 - 5469 |
Electrical and structural properties of Ta-N thin film and Ta/Ta-N multilayer for embedded resistor Na SM, Park IS, Park SY, Jeong GH, Suh SJ |
5470 - 5473 |
Dual-band windows (DBW) transparent for fundamental and second harmonic generation frequencies Ghiner A, Skvortsov M, Surdutovich G |
5474 - 5477 |
The effect of defects on the optical nonlinearity of thermally poled SiOx thin films Li WT, Boswell R, Samoc A, Samoc A, Wang RP |
5478 - 5482 |
Compositional dependence of absorption coefficient and band-gap for Nb2O5-SiO2 mixture thin films Sancho-Parramon J, Janicki V, Zorc H |
5483 - 5487 |
Second-order nonlinear optical properties of cross-linked silica films prepared through sol-gel process Cui YJ, Qian GD, Chen LJ, Wang ZY, Wang MQ |
5488 - 5492 |
Preparation of sol-gel films containing thiazole-based chromophore and their nonlinear optical performances Cui YJ, Qian GD, Chen LJ, Wang ZY, Wang MQ |
5493 - 5497 |
Optical investigation of GaSb thin films grown on GaAs by metalorganic magnetron sputtering Feng ZC, Hou FC, Webb JB, Shen ZX, Rusli E, Ferguson IT, Lu W |
5498 - 5502 |
Crystallography of TiSi2 (C54) epitaxy on (111)(Si) and (001)(Si) surfaces Zhang MX, Qiu D, Kelly PM |
5503 - 5507 |
Optical and mechanical properties with phosphated epoxy of jet printed and UV cured blue pixels acrylate as the curing agent Chang CJ, Tsai MH, Kao PC, Tzeng HY |
5508 - 5512 |
Optical properties of swift ion beam irradiated CdTe thin films Chandramohan S, Sathyamoorthy R, Sudhagar P, Kanjilal D, Kabiraj D, Asokan K |
5513 - 5517 |
Crystallization kinetics of Ga-Sb-Te films for phase change memory Cheng HY, Kao KF, Lee CM, Chin TS |
5518 - 5522 |
Pyroelectric Ta-modified LiNbO3 thin films and devices for thermal infrared detection Kao MC, Chen HZ, Yang SL, Chen YC, Hsieh PT, Yu CC |
5523 - 5526 |
Morphology and optoelectronic properties of ZnO rod array/conjugated polymer hybrid films Chang CJ, Tsai MH, Hsu YH, Tuan CS |
5527 - 5530 |
Diffusion barrier properties of AlMoNbSiTaTiVZr high-entropy alloy layer between copper and silicon Tsai MH, Yeh JW, Gan JY |
5531 - 5535 |
Influence of target to substrate distance on the sputtered CuCl film properties Natarajan G, Daniels S, Cameron DC, McNally PJ |
5536 - 5540 |
Plasma properties of CrOx films synthesized by a cathodic arc evaporation process Chang YY, Yang SJ, Liu YH, Wang DY |
5541 - 5544 |
Preparation of silane-WO3 film through sol-gel method and characterization of photochromism Luo ZK, Yang JJ, Cai HH, Li HY, Ren XZ, Liu JH, Liang X |
5545 - 5550 |
Growth and dielectric properties of BaTiO3 thin films prepared by the microwave-hydrothermal method Tan CK, Goh GKL, Lau GK |
5551 - 5556 |
Investigation of sub-nm ALD aluminum oxide films by plasma assisted etch-through Grigoras K, Franssila S, Airaksinen VM |
5557 - 5561 |
Sol-gel synthesis and luminescence property of ZnO :(La,Eu)Cl nanocomposite thin films Liu ZF, Li YX |
5562 - 5566 |
Pressure dependence and micro-hillock formation of ZnO thin films grown at low temperature by MOCVD Kim DC, Kong BH, Jun SO, Cho HK, Park DJ, Lee JY |
5567 - 5570 |
Luminescence properties of Eu(3+) ions doped in Y(2-x)Gd(x)O(3) thin films grown by pulsed laser deposition method Jang KH, Kim ES, Bae JS, Yi SS, Jeong JH, Seo HJ |
5571 - 5576 |
Metal organic chemical vapor deposition and investigation of ZnO thin films grown on sapphire Sun S, Tompa GS, Rice C, Sun XW, Lee ZS, Lien SC, Huang CW, Cheng LC, Feng ZC |
5577 - 5581 |
Luminescence characteristic of YVO4 : Eu3+ thin film phosphors by Li doping Yang HK, Shim KS, Moon BK, Choi BC, Jeong JH, Yi SS, Kim JH |
5582 - 5585 |
Hydrothermal growth of ferromagnetic Fe-doped TiO2 films Chan KYS, Goh GKL |
5586 - 5589 |
Study on the doping effect of Li-doped ZnO film Jeong SH, Park BN, Lee SB, Boo JH |
5590 - 5596 |
Effect of crystallographic orientations on electrical properties of sputter-deposited nickel oxide thin films Chen HL, Yang YS |
5597 - 5601 |
Effect of thickness of ZnO active layer on ZnO-TFT's characteristics Chung JH, Lee JY, Kim HS, Jang NW, Kim JH |
5602 - 5606 |
High-temperature growth and in-situ annealing of MgZnO thin films by RF sputtering Kim YY, An CH, Cho HK, Kim JH, Lee HS, Jung ES, Kim HS |
5607 - 5611 |
Microstructure and optical properties of MgxZn1-xO thin films grown by means of pulsed laser deposition Zhuang L, Wong KH |
5612 - 5617 |
Effects of oxygen gas flow rate and ion beam plasma conditions on the opto-electronic properties of indium molybdenum oxide films fabricated by ion beam-assisted evaporation Kuo CC, Liu CC, Lin CC, Liou YY, He JL, Chen FS |
5618 - 5624 |
Investigation of nozzle shape effect on Sm0.1Ce0.9O1.95 thin film prepared by electrostatic spray deposition Ksapabutr B, Panapoy M, Choncharoen K, Wongkasemjit S, Traversa E |
5625 - 5631 |
One-dimensional particle transmission in a statistically distributed potential field Li C, Hsieh JH, Cheng JC |
5632 - 5636 |
Directed growth of colloidal crystals on a hydrophobic polymer film by using hydrophilic traps Yan QF, Wong CC, Chiang YM |
5637 - 5639 |
Transition state annealing for defect control during colloidal self-assembly Koh YK, Teh LK, Wong CC |
5640 - 5644 |
Optical and electrical properties of ZnO nanoparticle thin films deposited on quartz by sparking process Kumpika T, Thongsuwan W, Singjai P |
5645 - 5648 |
Novel self assembled monolayers of allyl phenyl thiophene ether as potential dielectric material for organic thin film transistors Sathyapalan A, Ng SC, Lohani A, Ong TT, Chen H, Zhang S, Lam YM, Mhaisalkar SG |
5649 - 5653 |
Efficiency stabilization in deep-blue organic light-emitting devices with a double emitting layer acting as electron and hole trapping layers Bang HS, Lee DU, Kim TW, Han SM, Seo JH, Kim YK |
5654 - 5658 |
Preparation and characteristics of poly(amide-imide)/titania nanocomposite thin films Tsai MH, Chang CJ, Chen P, Ko CJ |
5659 - 5663 |
Plasma surface graft of acrylic acid and biodegradation of poly(butylene succinate) films Zhao HP, Zhu JT, Fu ZY, Feng XQ, Shao Y, Ma RT |
5664 - 5668 |
Improvement of highly efficient organic light-emitting diodes using Mg-doped ZnO buffer layers Huang HH, Chu SY, Kao PC, Chen YC |
5669 - 5672 |
High efficiency white organic light emitting diodes using Rubrene doped N,N'-bis-(1-naphthyl)-N,N'-diphenyl-1,1'-biphenyl-4,4'-diamine as an emitting layer Huang HH, Chu SY, Kao PC, Chen YC |
5673 - 5680 |
Factors influencing adhesion of fluorocarbon (FC) thin film on silicon substrate Gnanappa AK, Slattery O, Peters F, O'Murchu C, O'Mathuna C, Fahey R, Taylor JA, Krupenkin TN |
5681 - 5685 |
Sliding wear behavior of plasma sprayed Fe3Al-Al2O3 graded coatings Zhang JD, Sun KN, Wang JT, Tian BY, Wang HS, Yin YS |
5686 - 5689 |
Corrosion behavior of thermal barrier coatings exposed to NaCl plus water vapor at 1050 degrees C Song YX, Zhou CG, Xu HB |
5690 - 5699 |
Development and characterization of low friction coatings for protection against fretting wear in aerospace components Korsunsky AM, Torosyan AR, Kim K |
5700 - 5705 |
Corrosion properties of HVOF cermet coatings with bond coats in an aqueous chloride environment Lekatou A, Zois D, Grimanelis D |
5706 - 5709 |
Hybrid sol-gel coatings for corrosion protection of copper Tan ALK, Soutar AM |
5710 - 5715 |
Corrosion resistance of tungsten carbide based cermet coatings deposited by High Velocity Oxy-Fuel spray process Aw PK, Tan ALK, Tan TP, Qiu JH |
5716 - 5720 |
Corrosion resistance of CrAlN and TiAlN coatings deposited by lateral rotating cathode arc Ding XZ, Tan ALK, Zeng XT, Wang C, Yue T, Sun CQ |
5721 - 5724 |
A thermal and passivation study of self-assembled monolayers on thin gold films Ang XF, Li FY, Wei J, Tan WL, Wong CC |
5725 - 5731 |
Structural, mechanical, and tribological studies of Cr-Ti-Al-N coating with different chemical compositions Tam PL, Zhou ZF, Shum PW, Li KY |
5732 - 5735 |
High temperature oxidation behavior of hafnium modified NiAl bond coat in EB-PVD thermal barrier coating system Guo HB, Sun LD, Li HF, Gong SK |
5736 - 5739 |
Novel microstructure of EB-PVD double ceramic layered thermal barrier coatings Wei QL, Guo HB, Gong SK, Xu HB |
5740 - 5747 |
Oxidation and hot corrosion behavior of sputtered nanocrystalline coating of superalloy K52 Wang F, Tian X, Li Q, Li L, Peng X |