| 2987 - 3002 |
Biodoped ceramics: Synthesis, properties, and applications
Gadre SY, Gouma PI |
| 3003 - 3009 |
Electrophoretic deposition of YSZ particles on non-conducting porous NiO-YSZ substrates for solid oxide fuel cell applications
Besra L, Compson C, Liu ML |
| 3010 - 3018 |
Characterization of thermoplastic blends as binders for ceramics
Knapp AM, Halloran JW |
| 3019 - 3026 |
Factors influencing anisotropic sintering shrinkage in tape-cast alumina: Effect of processing variables
Patwardhan JS, Cannon WR |
| 3027 - 3033 |
Stresses and distortion due to green density gradients during densification
Schoenberg SE, Green DJ, Segall AE, Messing GL, Grader AS, Halleck PM |
| 3034 - 3042 |
Mineralizing magnesium aluminate spinel formation with B2O3
Bhattacharya G, Zhang S, Smith ME, Jayaseelan DD, Lee WE |
| 3043 - 3049 |
Monodisperse and corrosion-resistant metallic nanoparticles embedded into sepiolite particles for optical and magnetic applications
Pecharroman C, Esteban-Cubillo A, Montero I, Moya JS, Aguilar E, Santaren J, Alvarez A |
| 3050 - 3055 |
Dispersant-ethyl cellulose binder interactions at the Ni particle-dihydroterpineol interface
Lee S, Paik U, Yoon SM, Choi JY |
| 3056 - 3064 |
An aqueous gelcasting process for sintered silicon carbide ceramics
Ganesh I, Jana DC, Shaik S, Thiyagarajan N |
| 3065 - 3069 |
SiO2/Fe2O3 mesoporous composite prepared with an activated carbon template in supercritical carbon dioxide
Fan HJ, Xu Q, Li JG, Cao YX |
| 3070 - 3075 |
Surface modification of titania nanoparticles using ultrathin ceramic films
Hakim LF, McCormick JA, Zhan GD, Weimer AW, Li P, George SM |
| 3076 - 3080 |
Direct laser sintering of Al2O3-SiO2 dental ceramic components by layer-wise slurry deposition
Gahler A, Heinrich JG, Gunster J |
| 3081 - 3088 |
Mechano-synthesis of lead-magnesium-niobate ceramics
Kuscer D, Holc J, Kosec M, Meden A |
| 3089 - 3093 |
Freezing dilute ceramic/camphene slurry for ultra-high porosity ceramics with completely interconnected pore networks
Koh YH, Song JH, Lee EJ, Kim HE |
| 3094 - 3100 |
Effect of drying and dewatering on yttria precursors with transient morphology
Mouzon J, Oden M, Tillement O, Jorand Y |
| 3101 - 3106 |
Fabrication of low-density ferrous metallic foams by reduction of chemically bonded ceramic foams
Verdooren A, Chan HM, Grenestedt JL, Harmer MP, Caram HS |
| 3107 - 3111 |
Characterization and electrophoretic deposition of poly(phenylsilsesquioxane)-titania hybrid particles prepared by the sol-gel method
Takahashi K, Tadanaga K, Tatsumisago M, Matsuda A |
| 3112 - 3123 |
High-permittivity double rare-earth-doped barium titanate ceramics with diffuse phase transition
Lu DY, Toda M, Sugano M |
| 3124 - 3128 |
Synthesis of BaCu(B2O5) ceramics and their effect on the sintering temperature and microwave dielectric properties of Ba(Zn1/3Nb2/3)O-3 ceramics
Kim MH, Lim JB, Kim JC, Nahm S, Paik JH, Kim JH, Park KS |
| 3129 - 3135 |
Influence of processing conditions on the electrical properties of CaCu3Ti4O12 ceramics
Adams TB, Sinclair DC, West AR |
| 3136 - 3139 |
Multiferroic properties of single-phase Bi0.85La0.15FeO3 lead-free ceramics
Yuan GL, Baba-Kishi KZ, Liu JM, Or SW, Wang YP, Liu ZG |
| 3140 - 3146 |
Structural and dielectric characterization of nanocrystalline (Ba, Pb)ZrO3 developed by reverse micellar synthesis
Ahmad T, Ganguli AK |
| 3147 - 3156 |
High-energy density ceramic composition in the system Pb(Zr,Ti)O-3-Pb[(Zn,Ni)(1/3)Nb-2/3]O-3
Islam RA, Priya S |
| 3157 - 3161 |
Phase transition and lattice thermal expansion of cs-deficient pollucite, Cs1-xAl1-xSi2+xO6 (x <= 0.25), compounds
Kobayashi H, Sumino S, Tamai S, Yanase I |
| 3162 - 3166 |
Role of point defects in the physical properties of fluorite oxides
Duncan KL, Wang YL, Bishop SR, Ebrahimi F, Wachsman ED |
| 3167 - 3175 |
Thermochemical interaction of thermal barrier coatings with molten CaO-MgO-Al2O3-SiO2 (CMAS) deposits
Kramer S, Yang J, Levi CG, Johnson CA |
| 3176 - 3181 |
Internal structure evaluation of three-dimensional calcium phosphate bone scaffolds: A micro-computed tomograghic study
Jongpaiboonkit L, Halloran JW, Hollister SJ |
| 3182 - 3186 |
Spark plasma sintering of Ca1-xSrxTiO3 doped with Li2Si2O5
Li RX, Tang Q, Yin S, Omori M, Yamane H, Sato T |
| 3187 - 3193 |
Synthesis and characterization of nano-composite alumina-titania ceramic membrane for gas separation
Ahmad AL, Othman MR, Idrus NF |
| 3194 - 3200 |
Dendritic sublimation of sapphire
Kim SG, Yang JS, Kim WT |
| 3201 - 3210 |
TiO2-doped zirconia: Crystal structure, monoclinic-tetragonal phase transition, and the new tetragonal compound Zr3TiO8
Troitzsch U |
| 3211 - 3221 |
Effect of carbonation on alkali-activated slag paste
Palacios M, Puertas F |
| 3222 - 3228 |
An examination of surface tension of binary lithium borate melts as a function of composition and temperature
Shi XM, Wang Q, Niu XJ, Li CX, Lu KQ |
| 3229 - 3234 |
Structural analysis on planar defects formed in WC platelets in Ti-doped WC-Co
Lay S, Loubradou M, Schubert WD |
| 3235 - 3239 |
Addition of GeO2 to reduce the viscosity of parent glasses for low-expansion, transparent glass-ceramics containing high-quartz solid solutions
Shyu JJ, Lue CY, Jean RD |
| 3240 - 3245 |
Oxidation of zirconium diboride-silicon carbide at 1500 degrees C at a low partial pressure of oxygen
Rezaie A, Fahrenholtz WG, Hilmas GE |
| 3246 - 3251 |
Delamination-indicating thermal barrier coatings using YSZ : Eu sublayers
Eldridge JI, Bencic TJ, Spuckler CM, Singh J, Wolfe DE |
| 3252 - 3254 |
Erosion-indicating thermal barrier coatings using luminescent sublayers
Eldridge JI, Singh J, Wolfe DE |
| 3255 - 3257 |
Fabrication of functionally graded SiAlON ceramics by tape casting
Acikbas NC, Suvaci E, Mandal H |
| 3258 - 3261 |
Co-additions of TiO2 and SiO2 crystalline fillers to tailor the properties of BaO-ZnO-B2O3-SiO2 glass for application to barrier ribs of plasma display panels
Shin H, Kim SG, Park JS, An JS, Hong KS, Kim H |
| 3262 - 3265 |
Processing of cellular glasses using glass microspheres
Jang DH, Kim YW, Song IH, Kim HD |
| 3266 - 3269 |
Praseodymium-doped photo-luminescent strontium indate nanoparticles by ultrasonic spray pyrolysis
Lin SE, Borgohain K, Wei WCJ |
| 3270 - 3272 |
Thermal stability of (1-x)BiScO3-xPbTiO(3) piezoelectric ceramics for high-temperature sensor applications
Chen S, Dong XL, Mao CL, Cao F |
| 3273 - 3276 |
Improvement of microwave loss tangent and tunability of Ba0.55Sr0.45TiO3/MgO composites using the heterogeneous precipitation method
Liang RH, Dong XL, Chen Y, Cao F, Wang YL |
| 3277 - 3280 |
Formation of strontium-stabilized beta-tricalcium phosphate from calcium-deficient apatite
Kannan S, Pina S, Ferreira JMF |
| 3281 - 3284 |
The solid solubility of holmium in BaTiO3 under reducing conditions
Makovec D, Samardzija Z, Drofenik M |
| 3285 - 3289 |
Fabrication of functionally graded materials via inkjet color printing
Wang JW, Shaw LL |
| 3290 - 3293 |
Centrifugal sintering of a barium titanate thick film
Kinemuchi Y, Xiang PH, Kaga H, Watari K, Ishiguro H |
| 3294 - 3298 |
Electron carrier generation in a refractory oxide 12CaO (center dot) 7Al(2)O(3) by heating in reducing atmosphere: Conversion from an insulator to a persistent conductor
Kim SW, Hayashi K, Hirano M, Hosono H, Tanaka I |
| 3299 - 3301 |
Synthesis of ultrafine and spherical barium titanate powders using a titania nano-sol
Lee JJ, Park KJ, Hur KH, Yi SC, Koo SM |
| 3302 - 3304 |
Degradation mechanism of dielectric loss in barium niobate under a reducing atmosphere
Kim DW, Kim BK, Je HJ, Park JG, Kim JR, Hong KS |
| 3305 - 3307 |
Microwave dielectric properties of 5Li(2)O-0.583Nb(2)O(5)-3.248TiO(2) ceramics with V2O5
Zeng Q, Li W, Shi JL, Guo JK |
| 3308 - 3308 |
Adhesive-bonded Ca(Mg1/3Nb2/3)O-3/Ba(Zn1/3Nb2/3)O-3 layered dielectric resonators with tunable temperature coefficient of resonant frequency (vol 89, pg 544, 2006)
Lei L, Xing MC |
