| 4961 - 4964 |
Poly(methacrylate)-derived diblock dispersant for TiO2 in aqueous suspensions
Li CC, Chang SJ, Wu CW, Chang CW |
| 4965 - 4970 |
In-situ measurements of lattice expansion related to defect generation during flash sintering
Lebrun JM, Hellberg CS, Jha SK, Kriven WM, Steveson A, Seymour KC, Bernstein N, Erwin SC, Raj R |
| 4971 - 4976 |
A simple synthesis of the refractory ceramic sulfide CeS by electron beam irradiation
Panetta R, Latini A |
| 4977 - 4982 |
A simple approach to manufacture ceramic coils based on liquid rope coiling effect
Xing C, Yi MY, Wang GW, Wang X, Guo FW, Zhao XF, Xiao P |
| 4983 - 4987 |
Development of a novel proton conducting fuel cell based on a Ni-YSZ support
Hanifi AR, Sandhu NK, Etsell TH, Sarkar P |
| 4988 - 4993 |
Fabrication of highly homogeneous Al-doped TiO2 nanotubes by nanolamination of atomic layer deposition
Su CY, Wang CC, Hsueh YC, Gurylev V, Kei CC, Perng TP |
| 4994 - 4998 |
Splitting upconversion emission and phonon-assisted population inversion of Ba2Y(BO3)(2)Cl: Yb3+, Er3+ phosphor
Huang AJ, Yang ZW, Yu CY, Qiu JB, Song ZG |
| 4999 - 5010 |
Behavior of organic compounds in the pore solution of cement-experimental and molecular dynamics study
Chaudhari O, Biernacki JJ, Northrup S |
| 5011 - 5019 |
Sintering behavior of calcium lanthanum sulfide ceramics in field-assisted consolidation
Li YY, Wu YQ |
| 5020 - 5029 |
Dispersion of aluminum-doped zinc oxide nanopowder in non-aqueous suspensions
Li CC, Li MJ, Huang YP |
| 5030 - 5037 |
Spatial ions distribution of the bonding interface in YAG/Nd:LuAG composite laser ceramic
Zhang PD, Jiang BX, Jiang YG, Zhang G, Chen SL, Fan JT, Zhang L |
| 5038 - 5043 |
Pellet-buffered film seed to grow single grain bulk YBCO
Yang CM, Liu CH, Chen BX, Chang CW, Chen IG |
| 5044 - 5055 |
Preparation and high-temperature behavior of HfC-SiC nanocomposites derived from a non-oxygen single-source-precursor
Cheng J, Wang XZ, Wang H, Shao CW, Wang J |
| 5056 - 5065 |
Controlling phase separation of TaxHf1-xC solid solution nanopowders during carbothermal reduction synthesis
Foroughi P, Zhang C, Agarwal A, Cheng Z |
| 5066 - 5074 |
Investigations of ice-structuring agents in ice-templated ceramics
White MA, Conrad J, Ellis SN, Chen R |
| 5075 - 5085 |
Effect of absorbed water on the adhesion, friction, and wear of phosphate laser glass at nanoscale
Wang YR, He HT, Yu JX, Zhang YF, Hu HL |
| 5086 - 5095 |
Structure of active cerium sites within bioactive glasses
Benedetti F, Luches P, D'Addato S, Valeri S, Nicolini V, Pedone A, Menziani MC, Malavasi G |
| 5096 - 5106 |
Determination of heat conductivity of waste glass feed and its applicability for modeling the batch-to-glass conversion
Hujova M, Pokorny R, Klouzek J, Dixon DR, Cutforth DA, Lee SM, McCarthy BP, Schweiger MJ, Kruger AA, Hrma P |
| 5107 - 5112 |
Ga2S3-Sb2S3-CsI chalcohalide glasses for mid-infrared applications
Qiu JH, Yang AP, Zhang MJ, Li L, Zhang B, Tang DY, Yang ZY |
| 5113 - 5119 |
Electrical conductivity of silicon carbonitride-reduced graphene oxide composites
Yu YX, Xia FS, Huang QF, Fang JY, An LN |
| 5120 - 5130 |
Effects of ammonia concentration on the formation of CdS fabricated via microwave-assisted chemical bath deposition
Liu HY, Som S, Sung JC, Ou CY, Yang CY, Lu CH |
| 5131 - 5140 |
Dielectric and AC conductivity studies of novel porous armalcolite nanocomposite-based humidity sensor
Tripathy A, Pramanik S, Manna A, Radzi Z, Abu Osman NA |
| 5141 - 5150 |
Residual stress and electrical properties of Pb(Zr-0.52,Ti-0.48)O-3 thin films RF sputtered directly on Cu foils
Walenza-Slabe J, Gibbons BJ |
| 5151 - 5161 |
Role of localized graphitization on the electrical and magnetic properties of activated carbon
Raj KG, Joy PA |
| 5162 - 5173 |
Synthesis and photoluminescence characteristics of blue-green luminescent aluminum oxynitride
Genji K, Uchino T |
| 5174 - 5185 |
2D photonic crystal layer assisted thiosilicate ceramic plate with red-emitting film for high quality w-LEDs
Dai WB, Lei YF, Zhou J, Zhao Y, Zheng YH, Xu M, Wang SL, Shen F |
| 5186 - 5192 |
A low sintering temperature glass based on SiO2-P2O5-ZnO-B2O3-R2O system for white LEDs with high color rendering index
Kim S, Park HA, Bin Im W, Heo J, Choi JY, Chung WJ |
| 5193 - 5201 |
Effect of Li2O on the defect polarization in CuO-added (K0.9Na0.1)NbO3 piezoelectric ceramics
Kim DH, Park J, Lee TG, Cho SH, Park SJ, Lee KT, Kim JH, Nahm S |
| 5202 - 5210 |
The influence of phase transition on electrocaloric effect in lead-free (Ba0.9Ca0.1)(Ti1-xZrx)O-3 ceramics
Nie X, Yan SG, Guo SB, Cao F, Yao CH, Mao CL, Dong XL, Wang GS |
| 5211 - 5219 |
Submicron crystalline buildup and size-dependent energy harvesting characteristic in PZN-PZT ternary ferroelectrics
Yue YG, Hou YD, Zheng MP, Yan XD, Zhu MK |
| 5220 - 5225 |
Strong electromechanical coupling in paraelectric KTa1-xNbxO3 crystals
Meng XD, Tian H, Tan P, Huang F, Zhang R, Zhou ZX |
| 5226 - 5238 |
Effect of annealing atmosphere on leakage and dielectric characteristics of multiferroic gallium ferrite
Singh V, Daryapurkar A, Rajput SS, Mukherjee S, Garg A, Gupta R |
| 5239 - 5248 |
Enhanced structural, dielectric, ferroelectric, and piezoelectric properties of (1-x)Ba0.9Sr0.1TiO3-(x)Ba0.7Ca0.3TiO3 ceramics derived using mechano-chemical activation technique
Jain A, Panwar AK, Saroha R, Jha AK |
| 5249 - 5258 |
Octahedral distortion, phase structural stability, and microwave dielectric properties in equivalently substituted LaTiNbO6 ceramics
Zhang J, Zuo RZ |
| 5259 - 5273 |
Thermal behavior of mullite between 4 K and 1320 K
Murshed MM, Sehovic M, Fischer M, Senyshyn A, Schneider H, Gesing TM |
| 5274 - 5285 |
Novel dual heterojunction between MoS2 and anatase TiO2 with coexposed {101} and {001} facets
Zhang J, Zhang L, Yu WP, Jiang F, Zhang EP, Wang HB, Kong Z, Xi JH, Ji ZG |
| 5286 - 5294 |
Microstress in the matrix of a melt-infiltrated SiC/SiC ceramic matrix composite
Wing BL, Halloran JW |
| 5295 - 5305 |
High-temperature strength and plastic deformation behavior of niobium diboride consolidated by spark plasma sintering
Demirskyi D, Solodkyi I, Nishimura T, Sakka Y, Vasylkiv O |
| 5306 - 5317 |
Strengths of ceramic fiber bundles: Theory and practice
Callaway EB, Zok FW |
| 5318 - 5326 |
Mechanically inspired laser scribing of thin brittle materials
Collins AR, Fitzpatrick MA, Trollat JL, Olenick K, Olenick J, O'Connor GM |
| 5327 - 5334 |
Full reoxidation of CuMn2O4 spinel catalyst triggered by epitaxial Mn3O4 surface nanocrystals
Trapp M, Muller MM, Nazarpoor Z, Kleebe HJ |
| 5335 - 5346 |
Phase evolution from Ln(2)Ti(2)O(7) (Ln=Y and Gd) pyrochlores to brannerites in glass with uranium incorporation
Zhang YJ, Kong LG, Aughterson RD, Karatchevtseva I, Zheng RK |
| 5347 - 5347 |
Nonvacuum solution synthesis of (Ag,Cu)(In,Ga)Se-2 absorbers for applications in thin-film solar cells (vol 98, pg 3911, 2015)
Wu JJ, Yang CY, Sung JC, Lu CH |
| 5348 - 5348 |
Preparation and characterization of silver-doped Cu(In,Ga)Se-2 films via nonvacuum solution process (vol 99, pg 3280, 2016)
Wu JJ, Yang CY, Lu CH |
