1 - 6 |
A simple model for growth of semiconductor nanorods using lamellar precursors Li LB, Li YD |
7 - 12 |
Improved piezoelectric properties via mechano-chemical activation in modified PCT ceramics Singh S, Thakur OP, Prakash C, Raina KK |
13 - 22 |
Surfactant nucleation and orientation of crystals in the syntheses of metal sulfides in a polymer matrix Cates E, Pitcher MW, Bianconi PA |
23 - 28 |
A kinetic study on the electrodeposition of cadmium with the presence of organic agents in sulfate solutions Dolati A, Afshar A, Ghasemi H |
29 - 33 |
Vertically well-aligned ZnO nanowires generated with self-assembling polymers He Y, Sang WB, Wang JA, Wu RF, Min JH |
34 - 36 |
Synthesis of Sr0.5Ba0.5Nb2O6 by citrate gel method Pasricha R, Ravi V |
37 - 41 |
Velocity of sound and elastic properties of lanthanum gallo-germanate glasses Hwa LG, Chao WC |
42 - 51 |
Improvements on the synthesis and properties of fluorinated polyimide-clay nanocomposites by using double-swelling agents Wang HW, Dong RX, Chu HC, Chang KC, Lee WC |
52 - 57 |
Effect of surface temperature on the concentration of C-60/C-70 molecules in dc arc discharge fullerene generator Ahmad B, Ahmad M, Riaz M, Ahmad N, Ahmad S |
58 - 61 |
Novel chemical metathesis route to prepare TiCN nanocrystallites at low temperature Feng X, Shi LY |
62 - 68 |
Insulator-metal transition and the magnetic phase diagram of La1-xTexMnO3 (0.1 <= x >= 0.6) Yang J, Song WH, Ma YQ, Zhang RL, Zhao BC, Sheng ZG, Zheng GH, Dai JM, Sun YP |
69 - 72 |
Hydriding behavior of Mg17Al12 compound Zhang QA, Wu HY |
73 - 77 |
Luminescence characteristics of strontium borate phosphate phosphors Lu CH, Godbole SV, Natarajan V |
78 - 86 |
Effects of ethylene glycol, thickness, and B2O3 on PVA distribution in dried BaTiO3 green tape Li CC, Jean JH |
87 - 91 |
Influence of titanium ion implantation on the corrosion behavior of zircalloy-4 in 1 M H2SO4 Peng DQ, Bai XD, Pan F, Sun H, Chen BS |
92 - 102 |
Chemical degradation of glasses under simulated marine medium Carmona N, Garcia-Heras M, Gil C, Villegas MA |
103 - 108 |
The effect of substrate temperature on the structural and some physical properties of ultrasonically sprayed US films Bilgin V, Kose S, Atay F, Akyuz I |
109 - 113 |
Enhanced wear resistance and micro-hardness of polystyrene nanocomposites by carbon nanotubes Yang Z, Dong B, Huang Y, Liu L, Yan FY, Li HL |
114 - 118 |
Effects of post-deposition oxygen annealing on tuning properties of Ba0.8Sr0.2TiO3 thin-film capacitors for microwave integrated circuits Liu YR, Lai PT, Li GQ, Li B, Peng JB, Lo HB |
119 - 124 |
Phase separation, effects of magnetic field and high pressure on charge ordering in gamma-Na0.5CoO2 Yang HX, Shi YG, Nie CJ, Wu D, Yang LX, Dong C, Yu HC, Zhang HR, Jin CQ, Li JQ |
125 - 130 |
Corrosion behavior of electrodeposited Ni-Co alloy coatings under the presence of NaCl deposit at 800 degrees C Chang LM, An MZ, Shi SY |
131 - 140 |
The study of vacuum-furnace brazing of C103 and Ti-6Al-4V using Ti-15Cu-15Ni foil Hong IT, Koo CH |
141 - 147 |
Microstructure and electrical properties of Ba1-xSrxTiO3 thin films prepared by rf magnetron sputtering Chiu MC, Wang CC, Yao HC, Shieu FS |
148 - 152 |
Effect of amine groups in the synthesis of Ag nanoparticles using aminosilanes Frattini A, Pellegri N, Nicastro D, de Sanctis O |
153 - 158 |
Study of the combustion synthesis process of nanostructured WC and WC-Co Nersisyan HH, Won HI, Won CW, Lee JH |
159 - 164 |
Electroless deposition of nickel on the surface of silicon carbide/aluminum composites in alkaline bath Li LB, An MZ, Wu GH |
165 - 171 |
Effect of electrode material on AC electrical conductivity of organic zinc phthalocyanine semiconducting thin films Abu-Hilal AO, Saleh AM, Gould RD |