191 - 194 |
Synthesis of thorny BaCO3 dendritic structures via a simple PEG-assisted method Zhang Q, Chen CB, Fang L |
195 - 200 |
Synthesis and morphology of anisotropic NaNbO3 seed crystals Chang YF, Yang ZP, Chao XL, Liu ZH, Wang ZL |
201 - 204 |
Effect of precipitation route on the properties of antimony trioxide Abdullah AH, Noor NHM, Ramli I, Hashim M |
205 - 208 |
Preparation of composite nanofibers containing gold nanoparticles by using poly(N-vinylpyrrolidone) and beta-cyclodextrin Bai J, Yang QB, Li MY, Wang SG, Zhang CQ, Li YX |
209 - 212 |
Crystal structure of dense nanocrystalline BaTiO3 ceramics Xiao CJ, Jin CQ, Wang XH |
213 - 217 |
Electrochemical studies on cathode blends of LiMn2O4 and Li[Li1/15Ni1/5Co2/5Mn1/3O2] Jeong SK, Shin JS, Nahm KS, Kumar TP, Stephan AM |
218 - 224 |
Cyclodextrin polyurethanes polymerized with multi-walled carbon nanotubes: Synthesis and characterization Salipira KL, Krause RW, Mamba BB, Malefetse TJ, Cele LM, Durbach SH |
225 - 231 |
Microstructure, hysteresis and microwave absorption analysis of Ba((1-x))SrxFe(12)O(19) ferrite Narang SB, Singh C, Bai Y, Hudiara IS |
232 - 237 |
Preparation and photocatalytic study of fibrous K0.3Ti4O7.3(OH)(1.7)-anatase TiO2 nanocomposite photocatalyst Tawkaew S, Chareonpanich M, Supothina S |
238 - 243 |
Beneficial effects of nitrogen on austenite antibacterial stainless steels Zhang ZX, Lin G, Jiang LZ, Xu Z |
244 - 248 |
Research on electrochemical behavior of titanium-supported anodic coating in electrolytic anti-fouling of brine Liang CH, Huang NB |
249 - 253 |
Electric field control photo-induced Hall currents in semiconductors Miah MD |
254 - 259 |
Formation of silver nanoparticles in low-alkali borosilicate glass via silver oxide intermediates Kipke A, Hofmeister H |
260 - 264 |
Optical studies on non-stiochiometric (Zn, Fe)S chalcogenide bulk pellets prepared by coprecipitation Deulkar SH, Bhosale CH, Sharon M |
265 - 270 |
Biomineralizing synthesis of mesoporous hydroxyapatite-calcium pyrophosphate polycrystal using ovalbumin as biosurfactant Zhao HS, He W, Wang YJ, Yue YZ, Gao XG, Li ZM, Yan SP, Zhou WJ, Zhang XD |
271 - 274 |
Controllable synthesis of uncapped metal nanoparticle assembly at the air-water interface Cheng PH, Li DS, Yuan ZZ, Zou Y, Yang DR |
275 - 278 |
Preparation and characterization of yttria-stabilized zirconia nanotubes Meng XX, Tan XY, Meng B, Yang NT, Ma ZF |
279 - 282 |
Luminescence behavior from amorphous silicon-carbide film-based optical microcavities Chen DY, Xu J, Qian B, Chen S, Mei JX, Li W, Xu L, Chen KJ |
283 - 292 |
Dielectric, magnetic and spectroscopic properties of Li2O-WO3-P2O5 glass system with Ag2O as additive Rao KS, Reddy MS, Kumar VR, Veeraiah N |
293 - 295 |
Size effect on evaporation temperature of nanocrystals Wang TH, Zhu YF, Jiang Q |
296 - 300 |
Synthesis and characterization of a new material based on porous silica - Chemically immobilized C,N-pyridylpyrazole for heavy metals adsorption Radi S, Attayibat A, Lekchiri Y, Ramdani A, Bacquet M |
301 - 304 |
Controlled formation of Ag/poly(methyl-methacrylate) thin films by RAFT technique for optical switcher Sun YY, Liu YQ, Zhao GZ, Zhou X, Zhang QJ, Deng Y |
305 - 308 |
Two-step, preparation of Ag/tetrapod-like ZnO with photocatalytic activity by thermal evaporation and spluttering Tan T, Li Y, Liu Y, Wang B, Song XM, Li E, Wang H, Yan H |
309 - 312 |
Uniformly dispersed platinum nanoparticles loading on porous carbons without using reduction agents Ryu S, Lee CH, Park K, Kim HY, Yang XP |
313 - 316 |
The effects of different acids on the preparation of TiO2 nanostructure in liquid media at low temperature Wang ZY, Xia DG, Chen G, Yang T, Chen Y |
317 - 321 |
Preparation and characterization of low- and high-adherent transparent multi-walled carbon nanotube thin films Castro MRS, Schmidt HK |
322 - 325 |
Preparation and characterization of TiO2 nanosponge Guo LL, Gao G, Liu XL, Liu FQ |
326 - 330 |
Preparation and characterization of ultrafine alumina via sol-gel polymeric route Ibrahim DM, Abu-Ayana YM |
331 - 334 |
An improvement on redox reversibility of cobalt oxyhydroxide in nickel hydroxide electrodes Li XF, Dong HC, Zhang HL |
335 - 340 |
Structural characterization, stability and electrical properties of strontium niobate ceramic Xia T, Li Q, Meng J, Cao XQ |
341 - 345 |
Structural alterations during mechanochemical activation of a titanium-magnetite mixture Cristobal AA, Aglietti EF, Conconi MS, Lopez JMP |
346 - 350 |
X-ray diffraction line profile analysis of nanocrystalline graphite Milev A, Wilson M, Kannangara GSK, Tran N |
351 - 358 |
Some physical properties of copper oxide films: The effect of substrate temperature Kose S, Atay F, Bilgin V, Akyuz I |
359 - 363 |
Spectroscopic characteristics of Olgite (Ba,Sr)(Na,Sr)(2)Na[PO4](2) crystals doped with Sm2+ ions Huang YL, Kai WF, Lee HS, Cho EJ, Jang KW, Cao YG, Zhao WX, Ding HY, Wang XG |
364 - 367 |
Novel hollow sub-microspheres with movable Au nanoparticles and excessive Pt nanoparticles in core and silica as shell Min YL, Wan Y, Liu R, Yu SH |
368 - 374 |
Study on the interface of phenolic resin/expanded graphite composites prepared via in situ polymerization Zhang XL, Shen L, Xia X, Wang HT, Du QG |
375 - 380 |
Interface microstructure study of friction stir lap joint of AC4C cast aluminum alloy and zinc-coated steel Chen YC, Komazaki T, Kim YG, Tsumura T, Nakata K |
381 - 385 |
Superparamagnetic nanomagnetites modified with histidine and tyrosine Culita DC, Marinescu G, Patron L, Carp O, Cizmas CB, Diamandescu L |
386 - 390 |
Physical properties of CVD boron-doped multiwalled carbon nanotubes Mondal KC, Strydom AM, Erasmus RM, Keartland JM, Coville NJ |
391 - 395 |
Controlled synthesis and possible formation mechanism of leaf-shaped SnS2 nanocrystals Ma DK, Zhou HY, Zhang JH, Qian YT |
396 - 399 |
Host (nanodimensional pores of mesoporous material)-guest (semiconductor nanoparticles) nanocomposite materials Sohrabnezhad S, Pourahmad A |
400 - 408 |
Studies on an argon laser-induced photopolymerization employing both mono- and bischromophoric hemicyanine dye-borate complex as a photoinitiator: Part II Jedrzejewska B, Marciniak A, Paczkowski J |
409 - 413 |
Influence of rare-earth addition on microstructure and dielectric behavior of Ba0.6Sr0.4TiO3 ceramics Zhang JJ, Zhai JW, Chou XJ, Yao X |
414 - 418 |
Morphological study of magnetron sputtered Ti thin films on silicon substrate Chawla V, Jayaganthan R, Chawla AK, Chandra R |
419 - 422 |
Quadratic dependence of the spin-induced Hall voltage on longitudinal electric field Miah MI |
423 - 430 |
Physico-mechanical properties of naphthalene-acenaphthene eutectic system by different modes of solidification Sharma BL, Gupta S, Tandon S, Kant R |
431 - 437 |
Effect of Ni-modified alpha-Al2O3 prepared by sol-gel and solvothermal methods on the characteristics and catalytic properties of Pd/alpha-Al2O3 catalysts Mekasuwandumrong O, Wongwaranon N, Panpranot J, Praserthdam P |
438 - 443 |
Facile route to the synthesis of porous alpha-Fe2O3 nanorods Mandal S, Muller AHE |
444 - 454 |
Influences of solute content, melt superheat and growth direction on the transient metal/mold interfacial heat transfer coefficient during solidification of Sn-Pb alloys Ferreira IL, Spinelli JE, Nestler B, Garcia A |
455 - 462 |
A high-energy X-ray diffraction, P-31 and B-11 solid-state NMR study of the structure of aged sodium borophosphate glasses Qiu D, Guerry P, Ahmed I, Pickup DM, Carta D, Knowles JC, Smith ME, Newport RJ |
463 - 468 |
Influence of Cu addition on the self-propagating high-temperature synthesis of Ti5Si3 in Cu-Ti-Si system Wang HY, Lu SJ, Zha M, Li ST, Liu C, Jiang QC |
469 - 474 |
Electrodeposition of nanocrystalline nickel by using rotating cylindrical electrodes Moti E, Shariat MH, Bahrololoom ME |
475 - 479 |
Optical properties of tungsten disulfide single crystals doped with gold Dumcenco DO, Hsu HP, Huang YS, Liang CH, Tiong KK, Du CH |
480 - 485 |
Characterization of surface layers formed under natural environmental conditions on medieval glass from Siponto (Southern Italy) Genga A, Siciliano M, Fama L, Filippo E, Siciliano T, Mangone A, Traini A, Laganara C |
486 - 490 |
Photoluminescence of nitrogen-doped anatase Okumura T, Kinoshita Y, Uchiyama H, Imai H |
491 - 496 |
Characterization of the oxides formed at 1000 degrees C on the AISI 316L stainless steel - Role of molybdenum Buscail H, El Messki S, Riffard F, Perrier S, Cueff R, Caudron E, Issartel C |
497 - 502 |
Influence of fluid circulation on in vitro reactivity of bioactive glass particles Zhang D, Hupa M, Aro HT, Hupa L |
503 - 507 |
Influence of phytic acid concentration on performance of phytic acid conversion coatings on the AZ91D magnesium alloy Cui XF, Li Y, Li QF, Jin G, Ding MH, Wang FH |
508 - 512 |
Novel fabrication of monodispersed peanut-type celestine particles using Sr-EDTA chelating precursors Li YF, Ouyang JH, Zhou Y |
513 - 516 |
Structural evolutions of CdSe nanocrystals in ripening process Zhang XF, Sun ZH, Yan WS, Wei F, Wei SQ |
517 - 523 |
Isolation and characterization of biologically metal-doped protein as semiconducting biopolymer Arockiados T, Xavier FP, Babu M |
524 - 533 |
Evaluation of hot corrosion behaviour of HVOF sprayed NiCrAl coating on superalloys at 900 degrees C Mahesh RA, Jayaganthan R, Prakash S |
534 - 541 |
The influence of the synthesis routes of MgAl2O4 on its properties and behavior as support of dehydrogenation catalysts Bocanegra SA, Ballarini AD, Scelza OA, de Miguel SR |
542 - 547 |
Assessment of the thermal stability of anodic alumina membranes at high temperatures Fernandez-Romero L, Montero-Moreno JM, Pellicer E, Peiro F, Cornet A, Morante JR, Sarret M, Muller C |
548 - 554 |
Neodymium conversion layers formed on zinc powder for improving electrochemical properties of zinc electrodes Zhu LQ, Zhang H, Li WP, Liu HC |
555 - 558 |
Characterization and investigation of the mesogenic, thermo-morphologic and thermotropic properties of new chiral (S)-5-octyloxy-2-[{4-(2-methylbuthoxy)-phenylimino(methyl]phenol liquid crystalline compound Eran BB, Nesrullajev A, Canli NY |
559 - 564 |
B3-B1 phase transition and pressure dependence of elastic properties of ZnS Bilge M, Kart SO, Kart HH, Cagin T |
565 - 569 |
Synthesis of LiV3O8 by an improved citric acid assisted sol-gel method at low temperature Liu L, Jiao LF, Zhang YH, Sun JL, Yang L, Miao YL, Yuan HT, Wang YM |
570 - 577 |
Fabrication of alumina ceramics from powders made by sol-gel type hydrolysis in microemulsions Schinkel G, Garrn I, Frank B, Gernert U, Schubert H, Schomacker R |