173 - 176 |
Synthesis and characterization of phenyl-functionalized mesoporous hybrids with large-pore cubic Ia3d structure and varied pore sizes Huang JH, Wu TH, Wu SJ, Wang HS, Xing LH, Song K, Xu HY, Hang YZ, Kan QB |
177 - 181 |
Ionic conductivity and discharge characteristics of solid-state battery based on novel polymer electrolyte (PEO + NaBiF4) Mohan VM, Raja V, Sharma AK, Rao VVRN |
182 - 184 |
Preparation of gamma-Gd2S3 films by ultrasonic spray pyrolysis Wang W, Wang SY, Liu M |
185 - 189 |
Effects of BaO-B2O3-SiO2 glass additive on densification and dielectric properties of BaTiO3 ceramics Jeon HP, Lee SK, Kim SW, Choi DK |
190 - 194 |
Hydration of iron-phosphorus doped dicalcium silicate phase Benarchid MY, Diouri A, Boukhari A, Aride J, Elkhadiri I |
195 - 201 |
Fluorinated polyimides grafted with poly(ethylene glycol) side chains by the RAFT-mediated process and their membranes Chen YW, Chen L, Nie HR, Kang ET, Vora RH |
202 - 206 |
Electrochemical deposition of one-dimensional aluminum phthalocyanine nanomaterials Yang ZL, Pu HT |
207 - 212 |
Glycothermal synthesis of nanocrystalline zirconia and their applications as cobalt catalyst supports Panpranot J, Taochaiyaphum N, Praserthdam P |
213 - 220 |
Constants of elasticity of Li2O-B2O3-fly ash: Structural study by ultrasonic technique Saddeek YB, Azooz MA, Kenawy SH |
221 - 225 |
Preparation and electrochemical capacitance of brown-millerite SrCoO2.5 as electrode materials for supercapacitor Xiao F, Zhang XG, Hu FP, Zhang JL |
226 - 232 |
Preparation and characterisation of nanocrystalline IrxSn1-xO2 electrocatalytic powders Marshall A, Borresen B, Hagen G, Tsypkin M, Tunold R |
233 - 240 |
Characterization and phase transitions of (Bi,Pb)(2)Sr2Ca2Cu3Ox-Ag composite powder obtained by spray pyrolysis Marinkovic BA, Jardim PM, Rizzo F, Mancic L, Milosevic O |
241 - 244 |
Hydrothermal mild synthesis of microrod crystalline YxGd2-x(MoO4)(3): Eu3+ phosphors derived from facile co-precipitation precursors Wang QM, Yan B |
245 - 251 |
Electrodeposition of composite hydroxyapatite-chitosan films Pang X, Zhitomirsky I |
252 - 256 |
Surface cracking of soda lime glass under pulsed high-current electron radiation Wang PW, Kimberlin KR, Wang CY, Tao Y, Guo QL, Wu AM, Xu JJ |
257 - 260 |
Characterization and catalytic activity in NO decomposition of La2-xSrxCuO4 (0 <= x <= 1) compounds with T* phase structure Zhu JJ, Zhao Z, Xiao DH, Li J, Yang XG, Wu Y |
261 - 265 |
GaO2H, alpha-Ga2O3 and beta-Ga2O3 powders synthesized from ball-milled GaN powders Xiao HD, Ma HL, Liang W, Xue CS, Zhuang HZ, Ma J, Hu WR |
266 - 274 |
Effect of glass pre-treatment on the nucleation of semi-transparent gold coatings Xu XD, Cortie MB, Stevens M |
275 - 282 |
Influence of sintering time on electrical and dielectric behavior, and DC accelerated aging characteristics of Dy3+-doped ZnO-Pr6O11-based varistors Nahm CW |
283 - 287 |
Effect of thermal treatment on the microstructure and mechanical properties of gel-derived bioglasses Cai YR, Zhou L |
288 - 291 |
Preparation of a novel polysulfone/polyethylene oxide/silicone rubber multilayer composite membrane for hydrogen-nitrogen separation Ye Z, Chen Y, Li H, He GH, Deng MC |
292 - 297 |
A gamma-ray irradiation route to fabricate monodisperse zinc sulfide hollow spheres using silica as templates Zhao YB, Shi WF, Gong M, Yu F, Chen TT |
298 - 307 |
Highly stable amorphous silicon hydride from a helium plasma reaction Mills R, He J, Dhandapani B |
308 - 314 |
Growth and structural properties of indium sesquitelluride (In2Te3) thin films Desai RR, Lakshminarayana D, Patel PB, Patel PK, Panchal CJ |
315 - 321 |
High-energy radiation technique treat on the surface of carbon fiber Li JQ, Huang YD, Xu ZW, Wang Z |
322 - 327 |
Preparation of TiO2 hollow fibers using poly(vinylidene fluoride) hollow fiber microfiltration membrane as a template Lu HQ, Zhang LX, Xing WH, Wang HT, Xu NP |
328 - 332 |
Electromechanical and dielectric properties of Na0.5Bi0.5TiO3-K0.5Bi0.5TiO3-BaTiO3 Li YM, Chen W, Xu Q, Zhou J, Gu XY, Fang SQ |
333 - 341 |
Characterization, thermal stability and sintering of hydroxyapatite powders prepared by different routes Mostafa NY |
342 - 346 |
A novel donor-acceptor heterojunction from single-walled carbon nanotubes functionalized by erbium bisphthalocyanine Xu HB, Chen HZ, Shi MM, Bai R, Wang M |
347 - 352 |
The influence of yttrium on a typical SnO2 varistor system: Microstructural and electrical features Parra R, Maniette Y, Varela JA, Castro MS |
353 - 359 |
The effect of 1-(2-pyridylazo)-2-naphthol on the corrosion of cold rolled steel in acid media - Part 1: Inhibitive action in 1.0M hydrochloric acid Tang LB, Li XM, Li L, Qu Q, Mu GN, Liu GH |
360 - 364 |
Influence of polyvinyl alcohol on the synthesis of silica-pillared clay Nakao T, Nogami M |
365 - 370 |
Synthesis and characterization of nano-sized nickel ferrites from fly ash for catalytic oxidation of CO Rashad MM, Fouad OA |
371 - 375 |
Capacitive of characteristics of manganese oxides and polyaniline composite thin film deposited on porous carbon Zhou ZH, Cai NC, Zhou YH |
376 - 381 |
The effect of cyclic straining on the drawing stress of low carbon steel bars Correa ECS, Melo LDR, Aguilar MTP, Monteiro WA, Cetlin PR |
382 - 387 |
Synthesis by citric acid sol-gel method and electrochemical properties of Li4Ti5O12 anode material for lithium-ion battery Hao YJ, Lai QY, Liu DQ, Xu ZU, Ji XY |
388 - 400 |
Electrochemical-mechanical planarization of copper: Effects of chemical additives on voltage controlled removal of surface layers in electrolytes Goonetilleke PC, Roy D |
401 - 407 |
Role of an intermediate phase in solid state reaction of hydrous titanium oxide with potassium carbonate Liu C, Lu XH, Yu G, Feng X, Zhang QT, Xu ZZ |
408 - 411 |
Electromagnetic properties of Fe55Ni45 fiber fabricated by magnetic-field-induced thermal decomposition Li XC, Gong RZ, Nie Y, Zhao ZS, He HH |
412 - 416 |
Thermal stabilities of polystyrene/silica hybrid nanocomposites via microwave-assisted in situ polymerization Liu P, Su ZX |
417 - 422 |
Effect of Ce(IV) doping on formation of goethite and its transformation to hematite Mohapatra M, Sahoo SK, Mohanty CK, Das RP, Anand S |
423 - 428 |
Synthesis of LiCo1/3Ni1/3Mn1/3O2 as a cathode material for lithium ion battery by water-in-oil emulsion method Tong DG, Lai QY, Wei NN, Tang AD, Tang LX, Huang KL, Ji XY |
429 - 433 |
Effect of alkaline ion on the mechanism and kinetics of chemical reduction of silver Chou KS, Lu YC, Lee HH |
434 - 437 |
Polyol-mediated synthesis of copper indium sulphide by solvothermal process Gorai S, Chaudhuri S |
438 - 443 |
Percolated network of entangled multi-walled carbon nanotubes dispersed in polystyrene thin films through surface grafting polymerization Lin TS, Cheng LY, Hsiao CC, Yang ACM |
444 - 448 |
Optical limiting property of nanoparticles from a copper phthalocyanine-fullerene dyad Tian ZY, He CJ, Liu CL, Yang WS, Yao JN, Nie YX, Gong QH, Liu YQ |
449 - 453 |
Mechanisms of PVP in the preparation of silver nanoparticles Wang HS, Qiao XL, Chen JG, Wang XJ, Ding SY |
454 - 459 |
Synthesis and optical properties of CdS/PVA nanocomposites Khanna PK, Gokhale RR, Subbarao VVVS, Singh N, Jun KW, Das BK |
460 - 466 |
A precursor decomposition route to polycrystalline CuS nanorods Ou SM, Xie Q, Ma DK, Liang JB, Hu XK, Yu WC, Qian YT |