| 183 - 189 |
Mossbauer spectroscopy study of ferritic steel subjected to severe plastic deformation process
Liu MY, Liu P, Shi B, Cai X, Song HW |
| 190 - 196 |
The kinetic and thermodynamic analysis of Li ion in multi-walled carbon nanotubes
Lin KH, Xu YH, He GR, Wang XL |
| 197 - 201 |
Electrical transport properties of barium-titanium ferrite with a hollandite structure
Ahmed MA, Okasha N, Gabal MA |
| 202 - 205 |
Sn concentration on the reactive wetting of high-Pb solder on Cu substrate
Wang HQ, Ma X, Gao F, Qian YY |
| 206 - 209 |
Synthesis and characterization of micrometer-sized polycrystalline CdS nanosheets
Zhao JW, Ye CH, Fang XS, Yan P, Zhang LD |
| 210 - 213 |
Spectral properties and stability of Er3+-doped TeO2-WO3 glass
Zhao SL, Chen BY, Wen L, Hu LL |
| 214 - 219 |
Novel alkyl substituted polyanilines/molybdenum disulfide nanocomposites
Bissessur R, White W |
| 220 - 223 |
Thermal properties of Pb[(Zn1/3Nb2/3)(0.93)Ti-0.07]O-3 single crystals grown by the flux Bridgman method
Wu X, Xu J, Li X, Jin M, Wu A, Shi M, Fan S |
| 224 - 234 |
Effects of alloying elements, Cr, Mo and N on repassivation characteristics of stainless steels using the abrading electrode technique
Lee JB |
| 235 - 239 |
Synthesis of high purity nano-sized hydroxyapatite powder by microwave-hydrothermal method
Han JK, Song HY, Saito F, Lee BT |
| 240 - 246 |
Multiphase structure of hydrogen diluted a-SiC : H deposited by HWCVD
Swain BP, Dusane RO |
| 247 - 252 |
New fluorescent dipolar pyrazine derivatives for non-doped red organic light-emitting diodes
Gao BX, Zhou QG, Geng YH, Cheng YX, Ma DG, Xie ZY, Wang LX, Wang FS |
| 253 - 257 |
Gold nanoparticle/polypyrrole bi-layer film formed through a solution-based seeding growth process
He YH, Yuan JY, Shi GQ, Wu PY |
| 258 - 268 |
Non-isothermal crystallization kinetic behavior of alumina nanoparticle filled poly(ether ether ketone)
Kuo MC, Huang JC, Chen M |
| 269 - 275 |
Preparation of vanadium pentoxide powders by microwave plasma-torch at atmospheric pressure
Shin DH, Bang CU, Hong YC, Uhm HS |
| 276 - 283 |
Study of dielectric and impedance relaxations in (Na0.125Bi0.125 Ba0.65Ca0.1)(Nd0.065Ti0.87Nb0.065)O-3 ceramic
Syed M, Prasad G, Kumar GS |
| 284 - 288 |
DC conductivity and dielectric permittivity of collagen-chitosan films
Lima CGA, de Oliveira RS, Figueiro SD, Wehmann CF, Goes JC, Sombra ASB |
| 289 - 294 |
Physicochemical studies of NiO-GDC composites
Wandekar RV, Ali M, Wani BN, Bharadwaj SR |
| 295 - 299 |
Novel Cu flower-like nanostructures synthesized from a solid-stabilized emulsion approach
He YJ, Yu XY, Yang BL |
| 300 - 308 |
Electrodeposited Ni-B coatings: Formation and evaluation of hardness and wear resistance
Krishnaveni K, Narayanan TSNS, Seshadri SK |
| 309 - 313 |
Effect of film thickness on electrochromic activity of spray deposited iridium oxide thin films
Patil PS, Mujawar SH, Sadale SB, Deshmukh HP, Inamdar AI |
| 314 - 317 |
Effects of protection gas flow rate on the electrochemical capacitance of activated carbon nanotubes
Jiang Q, Lu XY, Zhao Y |
| 318 - 324 |
Sol-gel derived porous ceria powders using cerium glycolate complex as precursor
Ksapabutr B, Gulari E, Wongkasemjit S |
| 325 - 328 |
Fabrication of hollow ZnO microsphere with zinc powder precursor
Kou HM, Wang J, Pan YB, Guo JK |
| 329 - 332 |
Lead-free (K0.5Bi0.5)TiO3 powders and ceramics prepared by a sol-gel method
Zhu MK, Hou L, Hou YD, Liu JB, Wang H, Yan H |
| 333 - 340 |
The effect of hydrogen peroxide on the electrochemical behavior of Ti and some of its alloys for dental applications
Al-Mobarak NA, Al-Mayouf AM, Al-Swayih AA |
| 341 - 349 |
Electrosyntheses of high quality poly (5-cyanoindole) films in boron trifluoride diethyl etherate containing additional diethyl ether
Xu JK, Zhou WQ, Hou H, Pu SZ, Yan LS, Wang JW |
| 350 - 353 |
Electrophoretic deposition of BaTiO3 films from aqueous suspensions
Zhao JL, Wang XH, Li LT |
| 354 - 360 |
Biphasic synthesis of fatty acids stabilized silver nanoparticles: Role of experimental conditions on particle size
Rao CRK, Trivedi DC |
| 361 - 369 |
Structural, thermal and ion transport properties of radiation grafted lithium conductive polymer electrolytes
Nasef MM, Saidi H |
| 370 - 374 |
Effects of Er3+ concentration on UV/blue upconverted luminescence and a three-photon process in the cubic nanocrystalline Y2O3 : Er3+
Wang X, Shan GY, Chao KF, Zhang YL, Liu RL, Feng LY, Zeng QH, Sun YJ, Liu YC, Kong XG |
| 375 - 381 |
Incorporation of silver nanoparticles in DLC matrix and surface plasmon resonance effect
Hussain S, Roy RK, Pal AK |
| 382 - 387 |
Highly conductive and transparent ZnO thin films prepared by spray pyrolysis technique
Mohammad MT, Hashim AA, Al-Maamory MH |
| 388 - 393 |
Controlled interface between carbon fiber and epoxy by molecular self-assembly method
He JM, Huang YD, Liu L, Cao HL |
| 394 - 397 |
A rapid synthesis of sodium titanium phosphate, NaTi2(PO4)(3) by using microwave energy
Guler H, Kurtulus F |
| 398 - 404 |
Aqueous processing of hydroxyapatite
Zhang JX, Maeda M, Kotobuki N, Hirose M, Ohgushi H, Jiang DL, Iwasa M |
| 405 - 409 |
Effect of annealing temperature on Ag nano-composite synthesized by sol-gel
Raffi M, Akhter JI, Hasan MM |
| 410 - 413 |
'Pop-in' phenomenon during nanoindentation in epitaxial GaN thin films on c-plane sapphire substrates
Navamathavan R, Moon YT, Kim GS, Lee TG, Hahn JH, Park SJ |
| 414 - 417 |
Improvement of InGaN/GaN light emitting diode performance with a nano-roughened p-GaN surface by excimer laser-irradiation
Huang HW, Kao CC, Chu JT, Liang WD, Kuo HC, Wang SC, Yu CC |
| 418 - 423 |
The effect of heat-treatment on the suspension stability and gelation behavior of Li2O-BaO-Al2O3-SiO2-CaO(LBASC)
Cho CW, Hwang JH, Choi SC, Paik U, Lee MH |
| 424 - 430 |
Equivalent circuit modelling of Ni-SiC electrodeposition under ramp-up and ramp-down waveforms
Hu F, Chan KC |
| 431 - 436 |
Preparation and performance of lead foam grid for negative electrode of VRLA battery
Dai CS, Zhang B, Wang DL, Yi TF, Hu XG |
| 437 - 440 |
Fabrication and shape-evolution of nanostructured TiO2 via a sol-solvothermal process based on benzene-water interfaces
Yang SW, Gao L |
| 441 - 446 |
Studies on the inhibitive effect of Occimum viridis extract on the acid corrosion of mild steel
Oguzie EE |
| 447 - 450 |
One-step synthesis of Pt-supported carbon nanohorns for fuel cell electrode by arc plasma in liquid nitrogen
Sano N, Ukita S |
| 451 - 458 |
Nanocrystalline LiMn2O4 derived by HMTA-assisted solution combustion synthesis as a lithium-intercalating cathode material
Fey GTK, Cho YD, Kumar TP |
| 459 - 464 |
Zinc modified polyaniline coating for mild steel protection
Tuken T, Yazici B, Erbil M |
| 465 - 469 |
Synthesis and characterization of novel fluorine-containing poly(aryl ether ketone)s containing 1,4-naphthylene units
Zhang YH, Sun XB, Xu R, Niu YM, Wang GB, Jiang ZH |
| 470 - 473 |
Effect of alkali cations on the synthesis of novel layered silicates in the system SiO2-tetramethylammonium hydroxide-1,4-dioxane
Kawai A, Ikeda T, Kiyozumi Y, Chiku H, Mizukami F |
| 474 - 478 |
Raman and infrared spectral analysis of corrosion products on zinc NaZn4Cl(OH)(6)SO4-6H(2)O and Zn4Cl2(OH)(4)SO4 center dot 5H(2)O
Jayasree RS, Pillai VPM, Nayar VU, Odnevall I, Keresztury G |
| 479 - 486 |
Selective synthesis of cobalt hydroxide carbonate 3D architectures and their thermal conversion to cobalt spinel 3D superstructures
Li BX, Xie Y, Wu CZ, Li ZQ, Zhang J |
| 487 - 493 |
Non-Ohmic conduction in tin dioxide based varistor ceramics
Glot AB, Skuratovsky IA |
| 494 - 497 |
Synthesis of highly luminescent and photostable ZnS : Ag nanocrystals under microwave irradiation
Jian WP, Zhuang JQ, Zhang DW, Dai J, Yang WS, Bai YB |
| 498 - 504 |
The preparation of porous nano-TiO2 with high activity and the discussion of the cooperation photocatalysis mechanism
Jiang Y, Zhang P, Liu ZW, Xu F |
