1 - 4 |
(PIMS)-I-2 depth profile analysis of high temperature boron oxynitride dielectric films Badi N, Vijayaraghavan S, Benqaoula A, Tempez A, Tauziede C, Chapon P |
5 - 15 |
Adsorption behaviors of thiophene, benzene, and cyclohexene on FAU zeolites: Comparison of CeY obtained by liquid-, and solid-state ion exchange Qin YC, Mo ZS, Yu WG, Dong SW, Duan LH, Gao XH, Song LJ |
16 - 26 |
Cavitation erosion resistance of diamond-like carbon coating on stainless steel Cheng F, Jiang SY |
27 - 33 |
Inline RF sputtered TAZO films for applications in hydrogenated amorphous silicon thin film solar cells Lien SY, Hsu CH, Chang CH, Wu HY, Hsieh IC, Wang DY |
34 - 38 |
Well-controlled wet etching of ZnO films using hydrogen peroxide solution Wang YC, Wu TZ, Chen MM, Su LX, Zhang QL, Yuan LF, Zhu Y, Tang ZK |
39 - 43 |
Growth of linear Ni-filled carbon nanotubes by local arc discharge in liquid ethanol Sagara T, Kurumi S, Suzuki K |
44 - 54 |
Facile fabrication of superhydrophobic films with fractal structures using epoxy resin microspheres Quan YY, Zhang LZ |
55 - 62 |
Double junction photoelectrochemical solar cells based on Cu2ZnSnS4/Cu2ZnSnSe4 thin film as composite photocathode Zhu L, Qiang YH, Zhao YL, Gu XQ |
63 - 67 |
CO2 capture using zeolite 13X prepared from bentonite Chen C, Park DW, Ahn WS |
68 - 73 |
Influence of trimethylethoxysilane on the wetting behavior, humidity resistance and transparency of tetraethylorthosilicate based films Wang N, Xiong DS |
74 - 85 |
Surface/interface analysis and optical properties of RF sputter-deposited nanocrystalline titanium nitride thin films White N, Campbell AL, Grant JT, Pachter R, Eyink K, Jakubiak R, Martinez G, Ramana CV |
86 - 92 |
Fabrication and photoelectrochemical properties of ordered Si nanohole arrays Ji JY, Zhang HQ, Qiu Y, Wang LN, Wang Y, Hu LZ |
93 - 99 |
Phosphatizing of Mg particles to improve the protective performance of Mg-rich primer on A2024 Al alloy Wang JG, Zuo Y, Tang YM, Lu XY |
100 - 106 |
Effect of light illumination and temperature on P3HT films, n-type Si, and ITO Scudiero L, Shen Y, Gupta MC |
107 - 110 |
Adhesion forces in AFM of redox responsive polymer grafts: Effects of tip hydrophilicity Feng XL, Kieviet BD, Song J, Schon PM, Vancso GJ |
111 - 116 |
Dye-sensitized solar cells based on nanoparticle-decorated ZnO/SnO2 core/shell nanoneedle arrays Zhou Y, Xia C, Hu XY, Huang W, Aref AA, Wang BX, Liu ZJ, Sun YM, Zhou W, Tang YW |
117 - 127 |
Surface structure and reaction property of CuCl2-PdCl2 bimetallic catalyst in methanol oxycarbonylation: A DFT approach Meng QS, Wang SP, Shen YL, Yan B, Wu YX, Ma XB |
128 - 136 |
Controlling formation of gold nanoparticles generated in situ at a polymeric surface Clukay CJ, Grabill CN, Hettinger MA, Dutta A, Freppon DJ, Robledo A, Heinrich H, Bhattacharya A, Kuebler SM |
137 - 141 |
Study of calixarenes thin films as chemical sensors for the detection of explosives Montmeat P, Veignal F, Methivier C, Pradier CM, Hairault L |
142 - 148 |
An environmentally friendly approach for contaminants removal using supercritical CO2 for remanufacturing industry Liu WW, Zhang B, Li YZ, He YM, Zhang HC |
149 - 160 |
Lead dodecanoate coatings for the protection of lead and lead-tin alloy artifacts: Two examples De Keersmaecker M, Verbeken K, Adriaens A |
161 - 164 |
Enhanced hydrogen production by water splitting using Cu-doped TiO2 film with preferred (001) orientation Wang C, Hu QQ, Huang JQ, Zhu C, Deng ZH, Shi HL, Wu L, Liu ZG, Cao YG |
165 - 173 |
Surface passivation of aluminum alloy 6061 with gaseous trichlorosilane: A surface investigation Ngongang R, Marceau E, Carrier X, Pradier CM, Methivier C, Blanc JL, Carre M |
174 - 180 |
Facile additive-free synthesis of iron oxide nanoparticles for efficient adsorptive removal of Congo red and Cr(VI) Hao T, Yang C, Rao XH, Wang JD, Niu CG, Su XT |
181 - 189 |
Influence of diamond wheel grinding process on surface micro-topography and properties of SiO2/SiO2 composite Cao XY, Lin B, Wang Y, Wang SL |
190 - 196 |
Corrosion inhibition in 2.0 M sulfuric acid solutions of high strength maraging steel by aminophenyl tetrazole as a corrosion inhibitor Sherif ESM |
197 - 203 |
Deformation-phase transformation coupling mechanism of white layer formation in high speed machining of FGH95 Ni-based superalloy Du J, Liu ZQ, Lv SY |
204 - 212 |
Effect of sandblasting intensity on microstructures and properties of pure titanium micro-arc oxidation coatings in an optimized composite technique Wang HY, Zhu RF, Lu YP, Xiao GY, He K, Yuan YF, Ma XN, Li Y |
213 - 218 |
Oxygen-deficient indium tin oxide thin films annealed by atmospheric pressure plasma jets with/without air-quenching Liao WY, Chang HM, Yang YJ, Hsu CC, Cheng IC, Chen JZ |
219 - 224 |
Influence of oxygen pressure on the structural, electrical and optical properties of Nb-doped ZnO thin films prepared by pulsed laser deposition Wu MY, Yu SH, He L, Zhang G, Ling DX, Zhang WF |
225 - 230 |
Microstructure and mechanical properties of multiphase layer formed during thermo-diffusing of titanium into the surface of C17200 copper-beryllium alloy Yang L, Zhang FY, Yan MF, Zhang ML |
231 - 236 |
Preparation and characterization of CuInSe2 electrodeposited thin films annealed in vacuum Hamrouni S, AlKhalifah MS, Boujmil MF, Ben Saad K |
237 - 246 |
Self-assembly of carbon nanoclusters on dielectric boron nitride Tian XQ, Wei YD, Edwards SA, Yu YJ, Cai XM, Xu JB |
247 - 255 |
Regular self-microstructuring on CR39 using high UV laser dose Parvin P, Refahizadeh M, Mortazavi SZ, Silakhori K, Mahdiloo A, Aghaii P |
256 - 261 |
Preparation, characterization, and photocatalytic activity of porous AgBr@Ag and AgBrI@Ag plasmonic photocatalysts Yang F, Tian BZ, Zhang JL, Xiong TQ, Wang TT |
262 - 266 |
Interface state-related linear and nonlinear optical properties of nanocrystalline Si/SiO2 multilayers Zhang P, Zhang XW, Lu P, Xu J, Xu X, Li W, Chen KJ |
267 - 277 |
Further damage induced by water in micro-indentations in phosphate laser glass Yu JX, Jian QY, Yuan WF, Gu B, Ji F, Huang W |
278 - 284 |
Fabrication of alpha-Fe2O3@graphene nanostructures for enhanced gas-sensing property to ethanol Liang SM, Zhu JW, Wang C, Yu ST, Bi HP, Liu XH, Wang X |
285 - 290 |
Cost-efficient and flexible fabrication of rectangular-shaped microlens arrays with controllable aspect ratio and spherical morphology Hu Y, Yang Q, Chen F, Bian H, Deng ZF, Du GQ, Si JH, Yun F, Hou X |
291 - 296 |
Cupric oxide nanowires assembled by nanoparticles in situ with enhancing electrocatalytic oxidation of ascorbic acid Wang CX, Liu J, Huang X, Wang HH, Zheng YD, Lin L, Wang SY, Chen S, Jin Y |
297 - 300 |
Enhanced photovoltaic performance of dye sensitized solar cells using one dimensional ZnO nanorod decorated porous TiO2 film electrode Yang L, Ma QL, Cai YG, Huang YM |
301 - 310 |
Enhanced adsorption of hydroxyl contained/anionic dyes on non functionalized Ni@SiO2 core-shell nanoparticles: Kinetic and thermodynamic profile Jiang ZF, Xie JM, Jiang DL, Yan ZX, Jing JJ, Liu D |
311 - 318 |
Interactions between clay portions with various contacts and subjected to specific environmental conditions Zheng Y, Zaoui A, Pasteau A |
319 - 327 |
Effect of pyrolysis atmospheres on the morphology of polymer-derived silicon oxynitrocarbide ceramic films coated aluminum nitride surface and the thermal conductivity of silicone rubber composites Chiu HT, Sukachonmakul T, Wang CH, Wattanakul K, Kuo MT, Wang YH |
328 - 335 |
Adsorption and dissociation of H2S on Mo(100) surface by first-principles study Luo HJ, Cai JQ, Tao XM, Tan MQ |
336 - 344 |
Design and characterisation of a new duplex surface system based on S-phase hardening and carbon-based coating for ASTM F1537 Co-Cr-Mo alloy Luo X, Li XY |
345 - 349 |
High temperature thermal stability of the HfO2/Ge (100) interface as a function of surface preparation studied by synchrotron radiation core level photoemission Chellappan RK, Gajula DR, McNeill D, Hughes G |
350 - 356 |
Wear resistant PTFE thin film enabled by a polydopamine adhesive layer Beckford S, Zou M |
357 - 366 |
Preparation and characterization of direct Z-scheme photocatalyst Bi2O3/NaNbO3 and its reaction mechanism Chen SF, Hu YF, Ji L, Jiang XL, Fu XL |
367 - 377 |
Controlling the porosity of collagen, gelatin and elastin biomaterials by ultrashort laser pulses Daskalova A, Nathala CSR, Bliznakova I, Stoyanova E, Zhelyazkova A, Ganz T, Lueftenegger S, Husinsky W |
378 - 386 |
Optimization and evaluation of chelerythrine nanoparticles composed of magnetic multiwalled carbon nanotubes by response surface methodology Huang Y, Yuan YL, Zhou ZD, Liang JT, Chen ZC, Li GY |
387 - 389 |
In situ monitoring of GaN substrate surface in ICP containing energetic electrons Huang XJ, Guo Y, Zhang J, Nakano Y, Sugai H, Nakamura K |
390 - 399 |
Improvement of corrosion resistance and antibacterial effect of NiTi orthopedic materials by chitosan and gold nanoparticles Ahmed RA, Fadl-allah SA, El-Bagoury N, El-Rab SMFG |
400 - 404 |
FePtAg-C nanogranular film for ultrahigh density magnetic recording media Zhong WW, Hu R, Zhang L, Xue SX, Liu YP, Chen WP |
405 - 412 |
Effect of surface modification and UVA photoactivation on antibacterial bioactivity of zinc oxide powder Ann LC, Mahmud S, Bakhori SKM, Sirelkhatim A, Mohamad D, Hasan H, Seeni A, Rahman RA |
413 - 419 |
RIR MAPLE procedure for deposition of carbon rich Si/C/H films Drinek V, Strasak T, Novotny F, Fajgar R, Bastl Z |
420 - 431 |
Consequence of silver nanoparticles embedment on the carrier mobility and space charge limited conduction in doped polyaniline Biswas S, Dutta B, Bhattacharya S |
432 - 437 |
Mechanical and anticorrosion properties of nanosilica-filled epoxy-resin composite coatings Conradi M, Kocijan A, Kek-Merl D, Zorko M, Verpoest I |
438 - 446 |
Magnetic ion-imprinted and -SH functionalized polymer for selective removal of Pb(II) from aqueous samples Guo B, Deng F, Zhao Y, Luo XB, Luo SL, Au CT |
447 - 453 |
An efficient removal of methyl orange dye from aqueous solution by adsorption onto chitosan/MgO composite: A novel reusable adsorbent Haldorai Y, Shim JJ |
454 - 461 |
Field emission from alpha-Fe2O3 nanoflakes: Effect of vacuum pressure, gas adsorption and in-situ thermal treatment Wu JQ, Deng SZ, Xu NS, Chen J |
462 - 468 |
Preparation and characterization of Ni-P/Ni3.1B composite alloy coatings Wang YR, He JW, Wang WC, Shi JH, Mitsuzaki N, Chen ZD |
469 - 474 |
Effect of acidification conditions on the properties of carbon nanotube fibers Wang K, Li M, Liu YN, Gu YZ, Li QW, Zhang ZG |
475 - 479 |
First principles study of the electronic structure and magnetism of oxygen-deficient anatase TiO2 (001) surface Wang M, Feng M, Zuo X |
480 - 487 |
Preparation and antibacterial property of silver decorated carbon microspheres Li S, Yan XL, Yang Z, Yang YZ, Liu XG, Zou J |
488 - 493 |
Fluorine interaction with defects on graphite surface by a first-principles study Wang S, Ke XZ, Zhang W, Gong WB, Huai P, Zhang WQ, Zhu ZY |
494 - 499 |
Density functional theory study on direct catalytic decomposition of ammonia on Pd (111) surface Jiang Z, Pan Q, Li MM, Yan T, Fang T |
500 - 505 |
Effect of nanograin size on nanoformed NiTi alloys Wu CD, Fang TH, Chen CY, Weng CI |
506 - 513 |
Three-dimensional modeling of chloroprene rubber surface topography upon composition Zukiene K, Jankauskaite V, Petraitiene S |
514 - 519 |
Photoelectrochemical behavior of TiO2 nanorod arrays decorated with CuInS2 quantum dots Peng ZY, Liu YL, Zhao YH, Chen KQ, Kovalev V, Chen W |
520 - 530 |
Facile solid state synthesis of ZnO hexagonal nanogranules with excellent photocatalytic activity Pudukudy M, Yaakob Z |
531 - 536 |
Evaluation of subsurface damage in GaN substrate induced by mechanical polishing with diamond abrasives Aida H, Takeda H, Kim SW, Aota N, Koyama K, Yamazaki T, Doi T |
537 - 543 |
Enhanced dispersibility and dispersion stability of dodecylamine-protected silver nanoparticles by dodecanethiol for ink-jet conductive inks Zhou XQ, Li W, Wu ML, Tang S, Liu DZ |
544 - 550 |
ZnO nanorods inserted graphene sheets with improved supercapacitive performance Qin Z, Li ZJ, Yun GQ, Shi K, Li K, Yang BC |
551 - 555 |
Room temperature NO2-sensing properties of WO3 nanoparticles/porous silicon Yan WJ, Hu M, Zeng P, Ma SY, Li MD |
556 - 562 |
Microstructure and thermal stability of bulk nanocrystalline alloys produced by surface mechanical attrition treatment Liu WB, Zhang C, Yang ZG, Xia ZX |
563 - 569 |
Scalable superhydrophobic coatings based on fluorinated diatomaceous earth: Abrasion resistance versus particle geometry Polizos G, Winter K, Lance MJ, Meyer HM, Armstrong BL, Schaeffer DA, Simpson JT, Hunter SR, Datskos PG |
570 - 575 |
The photo-catalytic activities of MP (M = Ba, Ca, Cu, Sr, Ag; P = PO43-, HPO42-) microparticles Zhang F, Shi YJ, Zhao ZS, Song WJ, Cheng Y |
576 - 582 |
Preparation of titanium peroxide and its selective adsorption property on cationic dyes Zhao XG, Huang JG, Wang B, Bi Q, Dong LL, Liu XJ |
583 - 590 |
Development of an oxidation resistant glass-ceramic composite coating on Ti-47Al-2Cr-2Nb alloy Li WB, Zhu SL, Chen MH, Wang C, Wang FH |
591 - 597 |
Superhydrophobic perfluoropolymer surfaces having heterogeneous roughness created by dip-coating from solutions containing a nonsolvent Cengiz U, Erbil HY |
598 - 607 |
Parametric study of self-forming ZnO Nanowall network with honeycomb structure by Pulsed Laser Deposition El Zein B, Boulfrad S, Jabbour GE, Dogheche E |
608 - 614 |
Preparation and characterization of Zn/Ce/SO42--doped titania nano-materials with antibacterial activity Wang YZ, Xue XX, Yang H, Luan C |
615 - 619 |
Enhanced luminescence of quantum dot/dielectric layer/metal colloid multilayer thin films Liu BT, Liao TH, Tseng S, Lee MH |
620 - 625 |
Influences of Al particles on the microstructure and property of electrodeposited Ni-Al composite coatings Cai F, Jiang CH |
626 - 631 |
Adherence of human mesenchymal stem cells on Ti and TiO2 nano-columnar surfaces fabricated by glancing angle sputter deposition Motemani Y, Greulich C, Khare C, Lopian M, Buenconsejo PJS, Schildhauer TA, Ludwig A, Koller M |
632 - 637 |
Synthesis and structure-electrical response correlations of one-dimensional Barium Stannate-based heterostructure Liang YC, Liao WK |
638 - 644 |
Thinning of reverse osmosis membranes by ionic liquids Meng H, Gong BB, Geng T, Li CX |
645 - 649 |
Investigation of low and mild temperature for synthesis of high quality carbon nanotubes by chemical vapor deposition Fu X, Cui XZ, Wei XH, Ma JN |
650 - 657 |
Influence of silanes on the wettability of anodized titanium Vanithakumari SC, George RP, Mudali UK |
658 - 664 |
Effects of the ratio of anodic and cathodic currents on the characteristics of micro-arc oxidation ceramic coatings on Al alloys Wang JH, Du MH, Han FZ, Yang J |
665 - 669 |
The electrical and morphological properties of magnesium oxide/alumina bilayered thin films prepared by electron beam evaporation at oblique incidence He LJ, Li C, Liu XZ |
670 - 677 |
Removal of hexavalent chromium from aqueous solution by granular and powdered Peganum Harmala Khosravi R, Fazlzadehdavil M, Barikbin B, Taghizadeh AA |
678 - 681 |
Femtosecond laser fabrication of sub-diffraction nanoripples on wet Al surface in multi-filamentation regime: High optical harmonics effects? Ionin AA, Kudryashov SI, Makarov SV, Rudenko AA, Saltuganov PN, Seleznev LV, Sinitsyn DV, Sunchugasheva ES |
682 - 687 |
Preparation and electrochemical properties of core-shell carbon coated Mn-Sn complex metal oxide as anode materials for lithium-ion batteries Zhang RX, Fang GQ, Liu WW, Xia BB, Sun HD, Zheng JW, Li DC |
688 - 694 |
Structure and properties of TiAlLaN films deposited at various bias voltages Du H, Xiong J, Zhao HB, Wu YM, Wan WC, Wang LL |
695 - 701 |
Catalysis by silver nanoparticles/porous silicon for the reduction of nitroaromatics in the presence of sodium borohydride Liu X, Cheng HM, Cui P |
702 - 709 |
Studies on structural, electrical and optical properties of multiferroic (Ag, Ni and In) codoped Bi0.9Nd0.1FeO3 thin films Xue X, Tan GQ, Dong GH, Liu WL, Ren HJ |
710 - 716 |
Cd(II) removal from aqueous solution by adsorption on alpha-ketoglutaric acid-modified magnetic chitosan Yang GD, Tang L, Lei XX, Zeng GM, Cai Y, Wei X, Zhou YY, Li SS, Fang Y, Zhang Y |
717 - 725 |
Field emission study of pulsed laser deposition of gold on clean and oxidized tungsten tip Plsek J |
726 - 734 |
Characterization of fully functional spray-on antibody thin films Figueroa J, Magana S, Lim DV, Schlaf R |
735 - 741 |
Highly efficient adsorption of chlorophenols onto chemically modified chitosan Zhou LC, Meng XG, Fu JW, Yang YC, Yang P, Mi C |
742 - 749 |
Energetics of formation and hydration of functionalized silica nanoparticles: An atomistic computational study Rigo VA, de Lara LS, Miranda CR |
750 - 755 |
Tribological properties of self-assembled gold nanoparticles on silicon with polydopamine as the adhesion layer E SF, Shi L, Guo ZG |
756 - 763 |
The behavior of active bactericidal and antifungal coating under visible light irradiation Xiao G, Zhang XD, Zhao Y, Su HJ, Tan TW |
764 - 772 |
Modified composite microspheres of hydroxyapatite and poly(lactide-co-glycolide) as an injectable scaffold Hu XX, Shen H, Yang F, Liang XJ, Wang SG, Wu DC |
773 - 776 |
Magnetic and electrical properties of TiO2:Nb thin films Yu CF, Sun SJ, Chen JM |
777 - 781 |
Investigation of static and dynamic wetting transitions of UV responsive tunable wetting surfaces Pant R, Singha S, Bandyopadhyay A, Khare K |
782 - 789 |
Texturation and superhydrophobicity of polyethylene terephthalate thanks to plasma technology Tarrade J, Darmanin T, de Givenchy ET, Guittard F, Debarnot D, Poncin-Epaillard F |
790 - 794 |
Architecting boron nanostructure on the diamond particle surface Bai H, Dai D, Yu JH, Nishimura K, Sasaoka S, Jiang N |
795 - 805 |
An investigation on the effect of surface morphology and crystalline texture on corrosion behavior, structural and magnetic properties of electrodeposited nanocrystalline nickel films Nasirpouri F, Sanaeian MR, Samardak AS, Sukovatitsina EV, Ognev AV, Chebotkevich LA, Hosseini MG, Abdolmaleki M |
806 - 812 |
Effect of silane treatment on microstructure of sisal fibers Zhou F, Cheng GX, Jiang B |
813 - 822 |
Core/shell CdS/ZnS nanoparticles: Molecular modelling and characterization by photocatalytic decomposition of Methylene Blue Praus P, Svoboda L, Tokarsky J, Hospodkova A, Klemm V |
823 - 827 |
Enhanced thermoelectric properties of mixed zinc antimonide thin films via phase optimization Zheng ZH, Fan P, Liu PJ, Luo JT, Cai XM, Liang GX, Zhang DP, Ye F, Li YZ, Lin QY |
828 - 836 |
Effects of a carbon nanotube-collagen coating on a titanium surface on osteoblast growth Park JE, Park IS, Neupane MP, Bae TS, Lee MH |
837 - 842 |
Physical and photo-electrochemical characterizations of ZnO thin films deposited by ultrasonic spray method: Application to HCrO4-photoreduction Zebbar N, Trari M, Doulache M, Boughelout A, Chabane L |
843 - 851 |
Drug release from porous silicon for stable neural interface Sun T, Tsang WM, Park WT |
852 - 856 |
Chemical structures and electrical properties of atomic layer deposited HfO2 thin films grown at an extremely low temperature (<= 100 degrees C) using O-3 as an oxygen source Kim JH, Park TJ, Kim SK, Cho DY, Jung HS, Lee SY, Hwang CS |
857 - 866 |
Pinus sylvestris L. needle surface wettability parameters as indicators of atmospheric environment pollution impacts: Novel contact angle hysteresis methodology Pogorzelski SJ, Rochowski P, Szurkowski J |
867 - 875 |
Adsorption of DNA on biomimetic apatites: Toward the understanding of the role of bone and tooth mineral on the preservation of ancient DNA Grunenwald A, Keyser C, Sautereau AM, Crubezy E, Ludes B, Drouet C |
876 - 879 |
Effect of different thickness h-BN coatings on interface shear strength of quartz fiber reinforced Si-O-C-N composite Wang SB, Zheng Y |
880 - 885 |
Effects of growth temperature and oxidant feeding time on residual C-and N-related impurities and Si diffusion behavior in atomic-layer-deposited La2O3 thin films Park TJ, Sivasubramani P, Wallace RM, Kim J |
886 - 891 |
Effect of irradiation on deposition of CdS in fabricating co-axial heterostructure of TiO2 nanotube arrays via chemical deposition Pan RJ, Wu YC, Li ZL, Fang ZJ |
892 - 897 |
Ag/Pd core-shell nanoparticles by a successive method: Pulsed laser ablation of Ag in water and reduction reaction of PdCl2 Mottaghi N, Ranjbar M, Farrokhpour H, Khoshouei M, Khoshouei A, Kameli P, Salamati H, Tabrizchi M, Jalilian-Nosrati M |
898 - 905 |
Lipolytic biocatalyst based on recyclable magnetite-polysiloxane nanoparticles Durdureanu-Angheluta A, Ignat ME, Maier SS, Pricop L, Coroaba A, Fifere A, Pinteala M, Chiriac A |
906 - 914 |
The influence of deposition parameters on the structural quality of PLD-grown GaN/sapphire thin films Kawwam M, Lebbou K |
915 - 920 |
The use of high density plasma system to improve the etch properties of the zinc tin oxide thin film for transparent thin film transistors active layers Woo JC, Chun YS, Kim CI |
921 - 927 |
Hydrogen storage on nitrogen induced defects in palladium-decorated graphene: A first-principles study Ma L, Zhang JM, Xu KW |
928 - 936 |
Surface modification of aluminum nitride by polysilazane and its polymer-derived amorphous silicon oxycarbide ceramic for the enhancement of thermal conductivity in silicone rubber composite Chiu HT, Sukachonmakul T, Kuo MT, Wang YH, Wattanakul K |
937 - 943 |
TiO2 (B) nanosheets mediate phase selective synthesis of TiO2 nanostructured photocatalyst Wang YX, Wang CH, Zhang XT, Sun PP, Kong LN, Wei YA, Zheng H, Liu YC |
944 - 947 |
Microstructure and antibacterial properties of Cu-doped TiO2 coating on titanium by micro-arc oxidation Yao XH, Zhang XY, Wu HB, Tian LH, Ma Y, Tang B |
948 - 953 |
Synthesis of dumbbell-like Bi2WO6@CaWO4 composite photocatalyst and application in water treatment Zhang ZJ, Wang WZ, Jiang D, Xu JY |
954 - 957 |
C-60 layer growth on the Co/Si(111)root 7 x root 7 surface Olyanich DA, Utas TV, Kotlyar VG, Zotov AV, Saranin AA, Romashev LN, Solin NI, Ustinov VV |
958 - 970 |
On the interfacial characteristics of polyethylene/single-walled carbon nanotubes using molecular dynamics simulations Rouhi S, Alizadeh Y, Ansari R |
971 - 977 |
Preparation of lanthanum trifluoride nanoparticles surface-capped by tributyl phosphate and evaluation of their tribological properties as lubricant additive in liquid paraffin Li ZW, Hou X, Yu LG, Zhang ZJ, Zhang PY |
978 - 985 |
Preparation and visible light-induced photo-catalytic activity of H-PVA/TiO2 composite loaded on glass via sol-gel method Song YQ, Zhang JL, Yang HG, Xu SB, Jiang L, Dan Y |
986 - 989 |
Observation of chemical separation of In3Sb1Te2 thin film during phase transition Lee YM, Baik J, Shin HJ, Kim YS, Yoon SG, Jung MC, Qi YB |
990 - 996 |
Comparative study of the impact and sliding behavior of water droplets on two different hydrophobic silane coatings Nakajima A, Miyamoto T, Sakai M, Isobe T, Matsushita S |
997 - 1001 |
Nanostructured plasma etched, magnetron sputtered nanolaminar Cr2AlC MAX phase thin films Grieseler R, Hahnlein B, Stubenrauch M, Kups T, Wilke M, Hopfeld M, Pezoldt J, Schaaf P |
1002 - 1008 |
Absorption spectra and near-electric field enhancement effects of Au-and Ag-Fe3O4 dimers Wang BY, Qu SL |
1009 - 1019 |
Synthesis of titania modified silica-pillared clay (SPC) with highly ordered interlayered mesoporous structure for removing toxic metal ion Cr(VI) from aqueous state Mao HH, Zhu KN, Li BS, Yao C, Kong Y |
1020 - 1029 |
Hydroxyapatite-gelatin nanocomposite as a novel adsorbent for nitrobenzene removal from aqueous solution Wei W, Sun R, Jin Z, Cui J, Wei ZG |
1030 - 1039 |
Micro-arc oxidization of a novel Mg-1Ca alloy in three alkaline KF electrolytes: Corrosion resistance and cytotoxicity Jia ZJ, Li M, Liu Q, Xu XC, Cheng Y, Zheng YF, Xi TF, Wei SC |
1040 - 1044 |
Covalent assembly of poly(ethyleneimine) via layer-by-layer deposition for enhancing surface density of protein and bacteria attachment Xia B, Shi JS, Dong C, Zhang WY, Lu Y, Guo P |
1045 - 1051 |
New approach of long-term modification of Topas (R) to acquire surface hydrophilicity for chromosome spreading Mednova O, Kwasny D, Rozlosnik N, Svendsen WE, Almdal K |
1052 - 1058 |
In situ monitoring of excimer laser annealing of tin-doped indium oxide films for the development of a low-temperature fabrication process Shinoda K, Nakajima T, Tsuchiya T |
1059 - 1066 |
Mechanochemical approach to get layered double hydroxides: Mechanism explore on crystallite growth Zeng MG, Huo XL, Liu SQ, Li SP, Li XD |
1067 - 1076 |
Preparation of novel magnetic chitosan nanoparticle and its application for removal of humic acid from aqueous solution Dong CL, Chen W, Liu C |
1077 - 1082 |
Preparation of carbon-supported Bi/Ti composites and its catalytic activity under solar irradiation Wang P, Wu YL, Shi J, Liu D, Dong WB |