| 3375 - 3379 |
Study on hydrophilicity of polymer surfaces improved by plasma treatment
Lai JN, Sunderland B, Xue JM, Yan S, Zhao WJ, Folkard M, Michael BD, Wang YG |
| 3380 - 3385 |
X-ray photoelectron spectroscopy study of sputter-annealed Ni2.1Mn0.9Ga surface
Biswas C, Barman SR |
| 3386 - 3389 |
Preparation and characterization of pulsed laser deposition (PLD) SiC films
Tang YH, Sham TK, Yang D, Xue L |
| 3390 - 3393 |
The effect of nonmagnetic defects on magnetic behavior for multilayers Ta/Co/Co3O4/Ta
Wang YX, Tian W, Xiong J, Wang YX, Sun L, Li Q, You B, Hu A, Lu M |
| 3394 - 3400 |
Theoretical investigation of the intrinsic piezoelectric properties for tetragonal BaTiO3 epitaxial films
Jun OY, Ramesh R, Roytburd AL |
| 3401 - 3405 |
Study by AES of the titanium nitruration in the growing of TiN thin films by PLD technique
Gonzalez-Valenzuela C, Cota L, Gonzalez-Valenzuela R, de la Cruz W, Duarte-Moller A |
| 3406 - 3412 |
SIMS analysis of residual gas elements with a Cameca IMS-6f ion microprobe
Kudriavtsev Y, Villegas A, Godines A, Asomoza R |
| 3413 - 3416 |
Near-edge X-ray absorption fine-structure studies of GaN under low-energy nitrogen ion bombardment
Coleman VA, Petravic M, Kim KJ, Kimb B, Li G |
| 3417 - 3427 |
Surface analysis for LiBq(4) growing on ITO and CuPc film using atomic force microscopy (AFM) and X-ray photoelectron spectroscopy (XPS)
Ou GP, Gui WM, Jin SC, Zhang FJ |
| 3428 - 3435 |
Electron scattering mechanisms in indium-tin-oxide thin films prepared at the various process conditions
Lee HC |
| 3436 - 3440 |
Transition of 3D to 2D growth modes of InAs grown on GaAs
Miao ZL, Chua SJ, Zhang YW, Tripathy S |
| 3441 - 3448 |
Spray-pyrolysis deposition of LaMnO3 and La1-xCaxMnO3 thin films
Todorovska R, Petrova N, Todorovsky D, Groudeva-Zotova S |
| 3449 - 3453 |
Fabrication and electrical characterization of nanocrystalline ZnO/Si heterojunctions
Zhang Y, Xu J, Lin BX, Fu ZX, Zhong S, Liu CH, Zhang ZY |
| 3454 - 3459 |
Morphological and luminescent characteristics of GaN dots deposited on AIN by alternate supply of TMG and NH3
Tsai YL, Gong JR, Lin TY, Lin HY, Chen YF, Lin KM |
| 3460 - 3465 |
Interpretation of initial stage of 3C-SiC growth on Si(100) using dimethylsilane
Narita Y, Harashima M, Yasui K, Akahane T, Takata M |
| 3466 - 3474 |
Morphological and textural characterization of functionalized particulate silica xerogels
de Miranda LA, Mohallem NDS, de Magalhaes WF |
| 3475 - 3480 |
Microstructure and anti-oxidation property of CrSi2-SiC coating for carbon/carbon composites
Fu QG, Li HJ, Shi XH, Liao XL, Li KZ, Huang M |
| 3481 - 3487 |
Investigation of surface cleaning procedure of InP : S (100) substrates by high resolution XPS
Adamiec M, Talik E, Gladki A |
| 3488 - 3501 |
Chromium localization in plant tissues of Lycopersicum esculentum Mill using ICP-MS and ion microscopy (SIMS)
Mangabeira PA, Gavrilov KL, de Almeida AAF, Oliveira AH, Severo MI, Rosa TS, Silva DD, Labejof L, Escaig F, Levi-Setti R, Mielke MS, Loustalot FG, Galle P |
| 3502 - 3508 |
Effects of O-2/Ar flow ratio on the alcohol sensitivity of tin oxide film
Lee HC, Hwang WS, Lee GB, Lu YM |
| 3509 - 3513 |
Direct observation of room temperature magnetism in (In,Mn)As thin films by magnetic force microscopy
May SJ, Blattner AJ, Eam DP, Wessels BW |
| 3514 - 3519 |
Surface morphologies of anthracene single crystals grown from vapor phase
Jo S, Yoshikawa H, Fujii A, Takenaga M |
| 3520 - 3524 |
Synergistic inhibitive effect of tartarate and tungstate in preventing steel corrosion in aqueous media
Jabeera B, Shibli SMA, Anirudhan TS |
| 3525 - 3531 |
Structure and electrical transport properties of bismuth thin films prepared by RF magnetron sputtering
Kim DH, Lee SH, Kim JK, Lee GH |
| 3532 - 3540 |
Self-assembled monolayer growth on chemically modified polymer surfaces
Pimanpang S, Wang PI, Wang GC, Lu TM |
| 3541 - 3546 |
Investigation of laminar plasma remelting/cladding processing
Ma W, Fei QX, Pan WX, Wu CK |
| 3547 - 3552 |
Production and characterization of polymer nanocomposite with aligned single wall carbon nanotubes
Chen W, Tao XM |
| 3553 - 3560 |
Quantitative evaluation about property of thin-film formation
Chen HW, Hagiwara I, Huang TA, Zhang DW |
| 3561 - 3573 |
Electrodeposition of Pb-free Sn alloys in pulsed current
Neveu B, Lallemand F, Poupon G, Mekhalif Z |
| 3574 - 3579 |
Preparation of poly (2-chloroaniline) membrane and plasma surface modification
Kir E, Oksuz L, Helhel S |
| 3580 - 3584 |
Novel transparent Yb-based cathodes for top-emitting organic light emitting devices with high performance
Ma GL, Ran GZ, Xu AG, Qiao YP, Zhao WQ, Zhang BR, Wu SK, Qin GG |
| 3585 - 3590 |
Room temperature electrodeposition and characterization of bismuth ferric oxide (BFO) thin films from aqueous nitrate bath
Gujar TP, Shinde VR, Kulkarni SS, Pathan HM, Lokhande CD |
| 3591 - 3599 |
Mechanical properties and wear and corrosion resistance of electrodeposited Ni-Co/SiC nanocomposite coating
Shi L, Sun CF, Gao P, Zhou F, Liu WM |
| 3600 - 3608 |
The photocatalytic application and regeneration of anatase thin films with embedded commercial TiO2 particles deposited on glass microrods
Medina-Valtierra J, Garcia-Servin J, Frausto-Reyes C, Calixto S |
| 3609 - 3615 |
Characterization of bicrystalline epitaxial LaNiO3 films fabricated on MgO (100) substrates by pulsed laser deposition
Zheng LA, Zhu J, Zhanor Y, Jiang SW, Li YR, Xian HW, Li JL |
| 3616 - 3624 |
Windowless argon excimer source for surface modification
Elsner C, Lenk M, Prager L, Mehnert R |
| 3625 - 3631 |
Kinetics of residual gas adsorption on Ge(111) surface in low-energy electron backscattering
Shpenik OB, Popik TY, Feyer VM, Popik YV |
| 3632 - 3641 |
X-ray photoelectron study of Sn1-xMnxTe semimagnetic semiconductors
Iwanowski RJ, Heinonen MH, Paszkowicz W, Minikaev R, Story T, Witkowska B |
| 3642 - 3646 |
Study on anti-emission materials for non-emitting grid applications in microwave power tubes
Jiang J, Jiang BY, Ren CX, Zhang FM, Feng T, Wang X, Liu XH, Zou SC |
| 3647 - 3657 |
Vibrational EELS and DFT study of propionic acid and pyruvic acid on Ni(100): Effects of keto group substitution on room-temperature adsorption and thermal chemistry
Yang X, He ZH, Zhou XJ, Xu SH, Leung KT |
| 3658 - 3666 |
Inhibition of metal dusting of Alloy 800H by laser surface melting
Voisey KT, Liu Z, Stott FH |
| 3667 - 3672 |
The inhibition effect of some amino acids towards Pb-Sb-Se-As alloy corrosion in sulfuric acid solution
Ghasemi Z, Tizpar A |
| 3673 - 3685 |
Design parameters for measurements of local catalytic activity on surfaces
Johansson A, Johannessen T, Jorgensen JH, Chorkendorff I |
| 3686 - 3691 |
Single-atom coherent field electron emitters for practical application to electron microscopy: Buildup controllability, self-repairing function and demountable characteristic
Rokuta E, Itagaki T, Ishikawa T, Cho BL, Kuo HS, Tsong TT, Oshima C |
| 3692 - 3696 |
Temperature-dependent carbon incorporation into the Si1-yCy film during gas-source molecular beam epitaxy using monomethylsilane
Konno A, Senthil K, Murata T, Suemitsu M |
| 3697 - 3706 |
The influence of implanted yttrium on the cyclic oxidation behaviour of 304 stainless steel
Riffard F, Buscail H, Caudron E, Cueff R, Issartel C, Perrier S |
| 3707 - 3713 |
Copper sulfide coated polysulfone films
Kunita MH, Rinaldi AW, Girotto EM, Radovanovic E, Muniz EC, Rubira AF |
| 3714 - 3728 |
Adhesion studies of latex film surfaces on the meso- and nanoscale
Olah A, Hernpenius MA, Zou S, Vancso GJ |
| 3729 - 3736 |
Effect of N-2 ion flux on the photocatalysis of nitrogen-doped titanium oxide films by electron-beam evaporation
Yang TS, Yang MC, Shiu CB, Chang WK, Wong MS |
| 3737 - 3743 |
Effect of [Cu]/[In] ratio on properties of CuInS2 thin films prepared by successive ionic layer absorption and reaction method
Shi Y, Jin ZG, Li CY, An HS, Qiu JJ |
| 3744 - 3750 |
Wetting behavior of magnesite and dolomite surfaces
Gence N |
| 3751 - 3759 |
Extent of coverage of surfaces treated with hydrophobizing microemulsions: A mass spectrometry and contact angle study
Nagy A, Kennedy JP, Wang P, Wesdemiotis C, Hanton SD |
| 3760 - 3766 |
Analysis of prosthetic knee wear debris extracted from synovial fluid
Stojilovic N, Ehrman JD, Bender ET, Tokash JC, Ramsier RD, Kovacik MW |
| 3767 - 3773 |
Sorption of selenium(IV) and selenium(VI) onto magnetite
Martinez M, Gimenez J, de Pablo J, Rovira M, Duro L |
| 3774 - 3782 |
Polymerization of butadiene on nanoparticles' surfaces and formation of metal/polymer nanocomposites
Abdelsayed V, Ibrahim Y, El-Shall MS, Deevi S |
| 3783 - 3788 |
Pulsed laser deposition process of PLZT thin films using an infrared Nd : YAG laser
Garcia T, de Posada E, Bartolo-Perez P, Pena JL, Diamant R, Calderon F, Pelaiz A |
| 3789 - 3798 |
Chemical alteration of poly(vinyl fluoride) Tedlar (R) induced by exposure to vacuum ultraviolet radiation
Everett ML, Hoflund GB |
| 3799 - 3805 |
Asymmetric surface modification of poly(ethylene terephthalate) film by CF4 plasma immersion
Wen CH, Chuang MJ, Hsiue GH |
| 3806 - 3811 |
Ultraviolet photoelectron spectroscopy investigation of interface formation in an indium-tin oxide/fluorocarbon/organic semiconductor contact
Tong SW, Lau KM, Sun HY, Fung MK, Lee CS, Lifshitz Y, Lee ST |
| 3812 - 3817 |
Effect of the dispersibility of ZrO2 nanoparticles in Ni-ZrO2 electroplated nanocomposite coatings on the mechanical properties of nanocomposite coatings
Hou FY, Wang W, Guo HT |
| 3818 - 3827 |
Self-assembled monolayers on magnesium alloy surfaces from carboxylate ions
Liu YL, Yu ZF, Zhou SX, Wu LM |
| 3828 - 3832 |
Electrical screening of ternary NiO-Mn2O3-Co3O4 composition spreads
Kukuruznyak DA, Ahmet P, Chikyow T, Yamamoto A, Ohuchi FS |
| 3833 - 3836 |
Wear-out of Al-Ta2O5/SiO2-Si structures under dynamic stress
Novkovski N, Atanassova E |
| 3837 - 3842 |
Silane overpressure post-implant annealing of Al dopants in SiC: Cold wall CVD apparatus
Rao S, Bergamini F, Nipoti R, Saddow SE |
| 3843 - 3854 |
Adsorption and desorption of Ca and PO4 species from SBFs on RF-sputtered calcium phosphate thin films
van der Wal E, Oldenburg SJ, Heij T, van der Gon AWD, Brongersma HH, Wolke JGC, Jansen JA, Vredenberg AM |
| 3855 - 3860 |
Theoretical analysis of optical properties of dielectric coatings dependence on substrate subsurface defects
Shen J, Liu SH, Shen ZC, Shao JD, Fan ZX |
| 3861 - 3870 |
Dry etching of ITO by magnetic pole enhanced inductively coupled plasma for display and biosensing devices
Meziani T, Colpo P, Lambertini V, Ceccone G, Rossi F |
| 3871 - 3877 |
Surface state of TiO2 treated with low ion energy plasma
Jun J, Shin JH, Dhayal M |
| 3878 - 3883 |
Structural and tribological responses of phenolphthalein poly(ether sulfone) on electron irradiation
Pei XQ, Wang QH, Chen JM |
| 3884 - 3893 |
Immobilization of pyrene via diethylenetriamine on quartz plate surface for recognition of dicarboxylic acids
Gao LN, Fang Y, Lu FT, Cao MW, Ding LP |
| 3894 - 3902 |
Cr-Ni-Mo-Co surface alloying layer formed by plasma surface alloying in pure iron
Liu XP, Gao Y, Li ZH, Xu Z, Tian WH, Tang B |
| 3903 - 3911 |
Electronic properties of nanoporous TiO2 films investigated in real space by means of scanning tunnelling spectroscopy
Jacobsen V, Durr M, Wendling B, Yasuda A, Nelles G, Knoll W, Kreiter M |
| 3912 - 3919 |
Plasma-polymerized thiophene films for enhanced rubber-steel bonding
Delattre JL, d'Agostino R, Fracassi F |
