4859 - 4866 |
The electrochemical and mechanical properties of Ti incorporated amorphous carbon films in Hanks' solution Hong CF, Tu JP, Liu DG, Li RL, Gu CD |
4867 - 4872 |
Water and oil repellency of flexible silica-coated polymeric substrates Hsieh CT, Cheng YS, Hsu SM, Lin JY |
4873 - 4878 |
Morphology and microstructure of patterned nickel incorporated amorphous carbon films by simple pyrolysis Wan SH, Yu YL, Zhang JY, Wang LP |
4879 - 4882 |
Growth and characterization of Cd1-xZnxTe thin films prepared from elemental multilayer deposition Ganguly R, Hajra S, Mandal T, Banerjee P, Ghosh B |
4883 - 4887 |
Synthesis and characterization of GaN nanowires by ammoniating Ga2O3/Cr thin films deposited on Si(111) substrates Shi F, Wang ZP, Xue CS |
4888 - 4893 |
Electrochemical behavior of cobalt from 1-butyl-3-methylimidazolium tetrafluoroborate ionic liquid Su CN, An MZ, Yang PX, Gu HW, Guo XH |
4894 - 4901 |
Prediction of protein interaction behaviour with PEG-grafted matrices using X-ray photoelectron spectroscopy Damodaran VB, Fee CJ, Popat KC |
4902 - 4905 |
Enhanced dielectric properties of lead barium zirconate thin films by manganese doping Hao XH, Zhai JW, Zhou J, Li XW, Song XW, An SL |
4906 - 4914 |
Atomic oxygen recombination on the ODS PM 1000 at high temperature under air plasma Balat-Pichelin M, Beche E |
4915 - 4923 |
Preferred orientations in nano-gold/silica/silicon interfaces Vasisht S, Shirokoff J |
4924 - 4929 |
The effect of chromic sulfate concentration and immersion time on the structures and anticorrosive performance of the Cr(III) conversion coatings on aluminum alloys Chen WK, Bai CY, Liu CM, Lin CS, Ger MD |
4930 - 4933 |
Water condensation on zinc surfaces treated by chemical bath deposition Narhe RD, Gonzalez-Vinas W, Beysens DA |
4934 - 4937 |
Characterization of ZnO thin film synthesized on alumina-rich spinel substrate by magnetron sputtering Tang HL, Xu J, Li HJ, Dong YJ, Wang YZ, Wu F |
4938 - 4944 |
Microstructures and tribological properties of plasma sprayed WC-Co-Cu-BaF2/CaF2 self-lubricating wear resistant coatings Yuan JH, Zhu YC, Ji H, Zheng XB, Ruan QC, Niu YR, Liu ZW, Zeng Y |
4945 - 4952 |
Effects of mesoporous structure and UV irradiation on in vitro bioactivity of titania coatings Guo YP, Tang HX, Zhou Y, Jia DC, Ning CQ, Guo YJ |
4953 - 4958 |
Significant influence of particle surface oxidation on deposition efficiency, interface microstructure and adhesive strength of cold-sprayed copper coatings Li WY, Li CJ, Liao HL |
4959 - 4965 |
Considerations on the determining factors of the angular distribution of emitted particles in laser ablation Konomi I, Motohiro T, Kobayashi T, Asaoka T |
4966 - 4971 |
Temperature dependence of the optical band gap and electrical conductivity of sol-gel derived undoped and Li-doped ZnO films Caglar M, Caglar Y, Aksoy S, Ilican S |
4972 - 4976 |
Heterojunction light emitting diodes fabricated with different n-layer oxide structures on p-GaN layers by magnetron sputtering Kong BH, Han WS, Kim YY, Cho HK, Kim JH |
4977 - 4983 |
Low energy repetitive miniature plasma focus device as high deposition rate facility for synthesis of DLC thin films Ghareshabani E, Rawat RS, Verma R, Karamat S, Sobhanian S |
4984 - 4989 |
Protein immobilization capacity and covalent binding coverage of pulsed plasma polymer surfaces Yin YB, Bax D, McKenzie DR, Bilek MMM |
4990 - 4994 |
Field emission pressure sensors with non-silicon membranes Badi N, Nair AM, Bensaoula A |
4995 - 4999 |
Study of the morphological evolution of ZnO nanostructures on various sapphire substrates Kar JP, Das SN, Choi JH, Lee TI, Myoung JM |
5000 - 5005 |
Investigation on biological properties of tacrolimus-loaded poly(1,3-trimethylene carbonate) in vitro Hou RX, Wu LG, Wang J, Huang N |
5006 - 5010 |
Controllable synthesis of highly ordered Ag nanorod arrays by chemical deposition method Xu J, Cheng GA, Zheng RT |
5011 - 5014 |
Roughness evolution of Si surfaces upon Ar ion erosion de Rooij-Lohmann VITA, Kozhevnikov IV, Peverini L, Ziegler E, Cuerno R, Bijkerk F, Yakshin AE |
5015 - 5020 |
Morphology and antimony segregation of spangles on batch hot-dip galvanized coatings Peng S, Lu JT, Che CS, Kong G, Xu QY |
5021 - 5024 |
Enhancement of photoluminescence intensity from Si nanodots using Al2O3 surface passivation layer grown by atomic layer deposition Sun E, Su FH, Chen CH, Chen MJ |
5025 - 5030 |
A model for studying the kinetics of the formation of Fe2B boride layers at the surface of a gray cast iron Keddam M, Chegroune R |
5031 - 5034 |
Stabilization of a very high-k crystalline ZrO2 phase by post deposition annealing of atomic layer deposited ZrO2/La2O3 dielectrics on germanium Abermann S, Henkel C, Bethge O, Pozzovivo G, Klang P, Bertagnolli E |
5035 - 5041 |
Reflection absorption infrared spectroscopy during atomic layer deposition of HfO2 films from tetrakis(ethylmethylamido)hafnium and water Sperling BA, Kimes WA, Maslar JE |
5042 - 5045 |
A low temperature surface preparation method for STM nano-lithography on Si(100) Mol JA, Beentjes SPC, Rogge S |
5046 - 5050 |
Growth of TiO2 coating on wood surface using controlled hydrothermal method at low temperatures Li J, Yu HP, Sun QF, Liu YX, Cui YZ, Lu Y |
5051 - 5055 |
H2S-sensing properties of Pt-doped mesoporous indium oxide Tu JC, Li N, Lai XY, Chi Y, Zhang YJ, Wang W, Li XT, Li JX, Qiu SL |
5056 - 5060 |
Optical and electrical properties of nanocrystal zinc oxide films prepared by dc magnetron sputtering at different sputtering pressures Tanusevski A, Georgieva V |
5061 - 5068 |
Modification of three dimensional topography of the machined KDP crystal surface using wavelet analysis method Wang HX, Zong WJ, Sun T, Liu Q |
5069 - 5075 |
Structural and electrical characterization of the nickel silicide films formed at 850 degrees C by rapid thermal annealing of the Ni/Si(100) films Utlu G, Artunc N, Budak S, Tari S |
5076 - 5081 |
Annealing effect on CdS/SnO2 films grown by chemical bath deposition Metin H, Erat S, Durmus S, Ari M |
5082 - 5087 |
A comparative study of surface energy data from atomic force microscopy and from contact angle goniometry Lamprou DA, Smith JR, Nevell TG, Barbu E, Stone C, Willis CR, Tsibouklis J |
5088 - 5093 |
A density functional theory study of ethylene adsorption on Ni-10(111), Ni-13(100) and Ni-10(110) surface cluster models and Ni-13 nanocluster Yilmazer ND, Fellah MF, Onal I |
5094 - 5101 |
Reaction mechanism on reduction surface of mixed conductor membrane for H-2 production by coal-gas Shen PJ, Ding WZ, Zhou YD, Huang SQ |
5102 - 5107 |
Characteristics of ZnO:Al thin films co-doped with hydrogen and fluorine Kim YH, Jeong J, Lee KS, Park JK, Baik YJ, Seong TY, Kim WM |
5108 - 5115 |
Detection of algae and bacterial biofilms formed on titanium surfaces using micro-Raman analysis Ramya S, George RP, Rao RVS, Dayal RK |
5116 - 5119 |
Modulation of the photoluminescence of Si quantum dots by means of CO2 laser pre-annealing Chen YB, Ren Y, Xiong RL, Zhao YY, Lu M |
5120 - 5125 |
Phase compositions and ferroelectric properties of Pb(Zr-0.52,Ti-0.48)O-3 thin films with different highly orientations prepared by a sol-gel route Chi QG, Li WL, Fei WD, Xu SC, Feng B |