| 161 - 166 |
A three-dimensional model for simulating the maldistribution of liquid flow in random packed beds
Song M, Yin FH, Nandakumar K, Chuang KT |
| 167 - 174 |
The Marangoni effect and enhanced oil recovery part 1. Porous media
Lyford PA, Pratt HRC, Grieser F, Shallcross DC |
| 175 - 182 |
The Marangoni effect and enhanced oil recovery part 2. Interfacial tension and drop instability
Lyford PA, Shallcross DC, Grieser F, Pratt HRC |
| 183 - 189 |
Stochastic model for the simulation of the natural flow in random packed columns
Song M, Yin FH, Chuang KT, Nandakumar K |
| 190 - 195 |
Investigation of the mean and turbulent particle velocity fields in a spouted bed using radioactive particle tracking
Djeridane T, Larachi F, Roy D, Chaouki J, Legros R |
| 196 - 202 |
Autofluidization : The fluidization of solid particles by gases evolving from the particles
Lawrence AD, Gogolek PE, Kuang J |
| 203 - 210 |
Numerical analysis of the influence of the angle of inclination on the evaporation of a liquid film flowing along an isothermic or heated plate
Mezaache E, Daguenet M |
| 211 - 223 |
Nonlinear instabilities of falling films on a heated vertical plane with gas absorption
Peramanu S, Sharma A |
| 224 - 232 |
Gas-solid mass transfer in a rotating drum
Jauhari R, Gray MR, Masliyah JH |
| 233 - 238 |
The dissolution kinetics of sand as function of particle size
Jendoubi F, Mgaidi A, El Maaoui M |
| 239 - 247 |
Dynamics of the Fischer-Tropsch synthesis over a supported cobalt catalyst
Khodadadi AA, Hudgins RR, Silveston PL |
| 248 - 252 |
The effect of chloride on the HClO2-HOCl2 reaction in a 4.5 mol/L sulfuric acid solution
Yin G, Ni Y |
| 253 - 260 |
Ethanol-water pulping : Cooking variables optimization
Gilarranz MA, Oliet M, Rodriguez F, Tijero J |
| 261 - 266 |
Enhancement of the retention performance of the poly(ethylene oxide) tannic acid system by poly(dialyldimethyl ammonium chloride)
Khoultchaev KK, Pang P, Kerekes RJ, Englezos P |
| 267 - 275 |
Metabolic responses of plant cell culture to hydrodynamic stress
Takeda T, Kitagawa T, Takeuchi Y, Seki M, Furusaki S |
| 276 - 280 |
Use of commercial enzymatic and non-enzymatic detergents
Arguello MA, Elzo D, Riera FA, Alvarez R |
| 281 - 289 |
Use of velocity of sound in predicting thermodynamic properties of dense fluids from cubic equations of state
Shabani MR, Riazi MR, Shaban HI |
| 290 - 299 |
Derivation of a control oriented low order model of the dynamics of an infrared oven for the continuous drying of a thin sheet of material
Dhib R, Therien N, Broadbent AD |
| 300 - 314 |
Batch of chemical processes
Baudet P, Azzaro-Pantel C, Domenech S, Pibouleau L |
| 315 - 318 |
Local bubble behavior in three-phase fluidized beds
Chen Z, Zheng C, Feng Y, Hofmann H |
| 319 - 322 |
A generalised back-flow model to predict the tracer response in liquid-liquid stagewise contactors
Das PK |
| 323 - 330 |
A study of mass transfer behaviour in a catalytic distillation column
Huang CC, Podrebarac GG, Ng FTT, Rempel GL |
| 331 - 335 |
Increase in the thermal stability during the methanation of CO2 over a Rh catalyst prepared from an amorphous alloy
Kai T, Yamasaki Y, Takahashi T, Masumoto T, Kimura H |
