| 793 - 807 |
Drop breakup in an SMX static mixer in laminar flow
Liu SP, Hrymak AN, Wood PE |
| 808 - 815 |
Quantitative estimation of permeability with lattice Boltzmann simulations: Representative porous media from composite processing
Deshpande AP, Srikanth A, Praveen N |
| 816 - 828 |
Solid suspension in jet mixers
Kale RN, Patwardhan AW |
| 829 - 834 |
Numerical simulation of oil-water hydrocyclone using Reynolds-stress model for Eulerian multiphase flows
Huang S |
| 835 - 842 |
Minimizing impeller slurry wear through multilayer paint modelling
Wu J, Ngyuen B, Graham L, Zhu Y, Kilpatrick T, Davis J |
| 843 - 854 |
A theoretical study of the recycle effect on multi-pass mass exchangers with three idealized membranes inserted
Ho CD, Tu JW |
| 855 - 864 |
Hydrodenitrogenation and hydrodesulphurization of heaw gas oil using nimo/Al2O3 catalyst containing phosphorus: Experimental and kinetic studies
Ferdous D, Dalai AK, Adjaye J |
| 865 - 871 |
Prediction of hydrate phase equilibria in aqueous solutions of salt and organic inhibitor using a combined equation of state and activity coefficient-based model
Moharnmadi AH, Tohidi B |
| 872 - 881 |
Comprehensive modelling of the pitting biocorrosion of steel
Al-Darbi MM, Agha K, Islam MR |
| 882 - 888 |
Numerical study of the effect of particle size on the coating efficiency and uniformity of an electrostatic powder coating process
Li Z, Zhang C, Zhu J |
| 889 - 895 |
Development of an electrochemical device for removal of arsenic from drinking water
Sagitova F, Bejan D, Bunce NJ, Miziolek R |
| 896 - 903 |
Electrically conductive fibre composites prepared from polypyrrole-engineered pulp fibres
Huang B, Kang GJ, Ni YH |
| 904 - 908 |
Operating conditions for high production rates of ethanol in a continuous two-stage fermenter with cell recycle
Nishiwaki A, Dunn IJ |
| 912 - 912 |
Dispersion and mass transfer effects on dispersion and mass transfer effects on the performance of an immobilized lipase packed bed reactor during the hydrolysis of rice bran oil (vol 83, pg 780, 2005)
Murty VR, Bhat J, Muniswaran PKA, Sivasankaran S |
