| 1911 - 1921 |
Simulation of Stress Energy and Grinding Media Movement within a Wet-Operated Annular-Gap Mill Using the Discrete-Element Method
Beinert S, Schilde C, Kwade A |
| 1922 - 1930 |
Numerical Evaluation of Flow Fields and Stresses Acting on Agglomerates Dispersed in High-Pressure Microsystems
Beinert S, Gothsch T, Kwade A |
| 1931 - 1940 |
Wet-Media Milling of Colloidal Drug Suspensions Stabilized by Means of Charged Nanoparticles
Juhnke M, John E |
| 1941 - 1948 |
High-Precision Power Measurement for the Grindability Test According to Zeisel
Fleiger PM, Reichardt R, Treiber K |
| 1949 - 1953 |
Ceramic Media Selection for Optimization of Energy Efficiency in IsaMills (TM)
Durant B, Farber BY, Rule C, Mainza A |
| 1954 - 1961 |
Mixing Analysis for a Fermentation Broth of the Fungus Beauveria bassiana under Different Hydrodynamic Conditions in a Bioreactor
Nunez-Ramirez DM, Valencia-Lopez JJ, Calderas F, Solis-Soto A, Lopez-Miranda J, Medrano-Roldan H, Medina-Torres L |
| 1962 - 1967 |
A Scalable Preparation Method for SILP and SCILL Ionic Liquid Thin-Film Materials
Werner S, Szesni N, Kaiser M, Haumann M, Wasserscheid P |
| 1968 - 1972 |
Release of Gas-Phase O2 from Ilmenite during Chemical-Looping Combustion Experiments
Ryden M, Linderholm C, Markstrom P, Lyngfelt A |
| 1973 - 1980 |
Increasing the Storage Capacity and Selectivity in the Formation of Natural Gas Hydrates Using Porous Media
Zanjani NG, Moghaddam AZ, Nazari K, Mohammad-Taheri M |
| 1981 - 1988 |
Non-Newtonian Flows in Annuli with Variable Eccentric Motion of the Inner Tube
Neto JLV, Martins AL, Ataide CH, Barrozo MAS |
| 1989 - 1997 |
Thermal Effects on the Synthesis of 1,1-Dibutoxyethane in a Fixed-Bed Adsorptive Reactor
Graca NS, Pais LS, Silva VMTM, Rodrigues AE |
| 1998 - 2006 |
Effect of Operating Conditions and Powder Properties on Pneumatic Conveying Characteristics of a Top Discharge Blow Tank
Xu GL, Chen XP, Liang C, Xu P, Cai JY, Zhao CS |
| 2007 - 2014 |
Modeling and Optimization of Fe(III) Adsorption from Water using Bentonite Clay: Comparison of Central Composite Design and Artificial Neural Network
Savic IM, Stojiljkovic ST, Savic IM, Stojanovic SB, Moder K |
| 2015 - 2022 |
Thermo-Responsive Polyethersulfone Composite Membranes Blended with Poly(N-isopropylacrylamide) Nanogels
Wang G, Xie R, Ju XJ, Chu LY |
| 2023 - 2029 |
Development of an Efficient Method for the Removal of Silane Compounds from Exhaust Air
Hickstein B, Meynhardt B, Niemeier O, Weber D |
| 2030 - 2034 |
Kinetics of the Decomposition of Hydrogen Sulfide in a Dielectric Barrier Discharge Reactor
Reddy EL, Karuppiah J, Renken A, Kiwi-Minsker L, Subrahmanyam C |
| 2035 - 2044 |
High-Speed Particle Image Velocimetry Measurements of Turbulent Pipe Flows for Verification of a Fluid-Dynamic Cavitation Model
Opitz KM, Engel SR, Koegler AF, Leipertz A, Schlucker E |
| 2045 - 2050 |
Process Study of the Formation of Biodegradable Polymer Microspheres for Tissue Engineering
Griffini G, Levi M, Turri S |
| 2051 - 2057 |
Selecting Ceramic Grinding Media: Part 1-Theory
Kotze H |
