Chemical Engineering and Processing

Chemical Engineering and Processing, Vol.49, No.7 Entire volume, number list

ISSN: 0255-2701 (Print)

In this Issue (20 articles)

633 - 634	Homage/dedication of the issue to Prof. E. Bruce Nauman (1937-2009) Garde S, Isermann HP, Nigam A, Nigam KDP
635 - 642	Modeling and experimental validation of overpotentials of a direct ethanol fuel cell Pramanik H, Basu S
643 - 648	Study of the rate of liquid-solid mass transfer controlled processes in helical tubes under turbulent flow conditions Abdel-Aziz MH, Mansour IAS, Sedahmed GH
649 - 652	Static mixers for laminar flow reactors with low aspect ratios Nauman EB, Armstrong M, Horak J
653 - 661	Alternating mixing tabs in multifunctional heat exchanger-reactor Habchi C, Lemenand T, Della Valle D, Peerhossaini H
662 - 671	Geometrically deformed tubes as efficient vessels for post-column derivatization in high-performance liquid chromatography Neue UD
672 - 679	Numerical analysis of the lethality and processing uniformity in a double-pipe helical heat exchanger Rennie TJ, Raghavan VGS
680 - 688	A mass transport and hydrodynamic evaluation of membrane separation cell Kawachale N, Kirpalani DM, Kumar A
689 - 696	Experimental and CFD studies on using coil wire insert in a proton exchange membrane fuel cell Rahimi M, Aghel B, Alsairafi AA
697 - 703	Process intensification of particle separation by lift force in arc microchannel with bifurcation Ookawara S, Oozeki N, Ogawa K, Lob P, Hessel V
704 - 715	Streamline topologies of two-dimensional peristaltic flow and their bifurcations Jimenez-Lozano J, Sen M
716 - 721	Convective and diffusive mass transport through anisotropic, capillary membrane Nagy E
722 - 731	Pd/Ag-based membrane reactors on small scale: Assessment of the feed pressure and design parameters effect on the performance Chiappetta G, Barbieri G, Drioli E
732 - 739	Heat-transfer characteristics in multi-scale flow networks with parallel channels Saber M, Commenge JM, Falk L
740 - 747	Characterization and modeling of micromixing performance in micropore dispersion reactors Zhang JS, Wang K, Lu YC, Luo GS
748 - 758	Development of a Higee bioreactor (HBR) for production of polyhydroxyalkanoate: Hydrodynamics, gas-liquid mass transfer and fermentation studies Boodhoo KVK, Cartwright CD, Vicevic M, Prieto MA, Tortajada M
759 - 781	Review of 3D CFD modeling of flow and mass transfer in narrow spacer-filled channels in membrane modules Fimbres-Weihs GA, Wiley DE
782 - 792	Spiral column configuration for protein separation by high-speed countercurrent chromatography Ito Y
793 - 803	Liquid backmixing in oscillatory flow through a periodically constricted meso-tube Reis N, Vicente AA, Teixeira JA
804 - 808	Analysis of radial flow reformer for fuel cell applications (Reprinted from Chemical Engineering and Processing: Process Intensification, vol 48, pg 1482-1486, 2009) Teichmiller WA, Palanki S