| 1 - 6 |
Kinetic study of the thermal degradation of alkaline straw black liquor in nitrogen atmosphere
Sanchez JL, Gea G, Gonzalo A, Bilbao R, Arauzo J |
| 7 - 17 |
Design of a fuel processor unit for PEM fuel cell via shortcut design method
Kamarudin SK, Daud WRW, Som AM, Takriff MS, Mohammad AW, Loke YK |
| 19 - 26 |
Characterization of liquid phase mixing in turbulent bed contactor through RTD studies
Bruce AER, Sai PST, Krishnaiah K |
| 27 - 33 |
Catalytic transfer hydrogenation: o-nitro anisole to o-anisidine, some process development aspects
Haldar P, Mahajani VV |
| 35 - 43 |
Modeling of counter current moving bed gas-solid reactor used in direct reduction of iron ore
Parisi DR, Laborde MA |
| 45 - 54 |
Holdup and pressure drop studies in structured packings with catalysts
Ratheesh S, Kannan A |
| 55 - 61 |
Optimization of experimental conditions based on the Taguchi robust design for the formation of nano-sized silver particles by chemical reduction method
Kim KD, Han DN, Kim HT |
| 63 - 71 |
Study of unsteady state process operation
Suman B |
| 73 - 81 |
Application of steady-state and dynamic modeling for the prediction of the BOD of an aerated lagoon at a pulp and paper mill - Part I. Linear approaches
Oliveira-Esquerre KP, Seborg DE, Bruns RE, Mori M |
| 83 - 91 |
Flow injection potentiometric stripping analysis for study of adsorption of heavy metal ions onto modified diatomite
Al-Ghouti MA, Khraisheh MAM, Tutuji M |
| 93 - 95 |
A novel Hg control technology derived from quantum chemistry
Fan MH, Norton GA, Brown RC |
| 97 - 97 |
Comments on "On the variation of precessional flow instabilities with operational parameters in stirred vessels" by L. Nikiforaki, J. Yu, S. Baldi, B. Genenger, K.C. Lee, F Durst and M. Yanneskis
Fort I |
| 99 - 99 |
Response to the comments regarding the work "On the variation of precessional flow instabilities with operational parameters in stirred vessels"
Yianneskis M |
