Chemical Engineering Journal

Chemical Engineering Journal, Vol.139, No.2 Entire volume, number list

ISSN: 1385-8947 (Print)

In this Issue (25 articles)

213 - 223	Adsorption kinetics and mechanism of maxilon blue 5G dye on sepiolite from aqueous solutions Alkan M, Dogan M, Turhan Y, Demirbas O, Turan P
224 - 235	Drag on ensembles of fluid spheres translating in a power-law liquid at moderate Reynolds numbers Kishore N, Chhabra RP, Eswaran V
236 - 244	Effects of thermal treatments on five different waste activated sludge samples solubilisation, physical properties and anaerobic digestion Bougrier C, Delgenes JP, Carrere H
245 - 255	Adsorption of Cr(VI) using thermally activated weed Salvinia cucullata Baral SS, Das SN, Chaudhury GR, Swamy YV, Rath P
256 - 263	Comparison study of dyestuff wastewater treatment by the coupled photocatalytic oxidation and biofilm process Kim DS, Park YS
264 - 271	Removal of organic impurities with activated carbons for ultra-pure hydrogen peroxide preparation Lin Q, Jiang Y, Geng J, Qian Y
272 - 283	Catalytic ozonation with non-polar bonded alumina phases for treatment of aqueous dye solutions in a semi-batch reactor Erol F, Ozbelge TA
284 - 295	Performance of Kenics static mixer over a wide range of Reynolds number Kumar V, Shirke V, Nigam KDP
296 - 303	Flux enhancement and cake formation in air-sparged cross-flow microfiltration Hwang KJ, Wu Y
304 - 317	Development and validation of mathematical model for aerobic composting process Petric I, Selimbasic V
318 - 321	Selective removal of acetone and butan-1-ol from water with supported ionic liquid-polydimethylsiloxane membrane by pervaporation Izak P, Ruth W, Fei Z, Dyson PJ, Kragl U
322 - 329	Influence of operating parameters on photocatalytic degradation of phenol in UV/TiO2 process Chiou CH, Wu CY, Juang RS
330 - 338	Studies on segregation of binary mixture of solids in continuous fast fluidized bed - Part II. Effect of particle size Palappan KG, Sai PST
339 - 343	Development of a large sonochemical reactor at a high frequency Asakura Y, Yasuda K, Kato D, Kojima Y, Koda S
344 - 350	Product quality improvement of batch crystallizers by a batch-to-batch optimization and nonlinear control approach Paengjuntuek W, Arpornwichanop A, Kittisupakorn P
351 - 362	Quantitative measurement of gas hold-up distribution in a stirred chemical reactor using X-ray cone-beam computed tomography Boden S, Bieberle M, Hampel U
363 - 379	Numerical simulation of the gas-liquid flow in a laboratory scale bubble column Influence of bubble size distribution and non-drag forces Diaz ME, Iranzo A, Cuadra D, Barbero R, Montes FJ, Galan MA
380 - 389	A novel approach to reduce hydrocarbon emissions from the HCCI engine Zeng W, Me MZ
390 - 397	A multi-phase AC arc discharge and its application in in-flight thermal treatment of raw glass powders Yao Y, Hossain MM, Watanabe T, Matsuura T, Funabiki F, Yano T
398 - 407	Development of composite tissue scaffolds containing naturally sourced mircoporous hydroxyapatite Kusmanto F, Walker G, Gan Q, Walsh P, Buchanan F, Dickson G, McCaigue M, Maggs C, Dring M
408 - 415	Paper-structured catalyst with porous fiber-network microstructure for autothermal hydrogen production Koga H, Fukahori S, Kitaoka T, Nakamura M, Wariishi H
416 - 425	Role of phase behavior in micronization of lysozyme via a supercritical anti-solvent process Chang SC, Lee MJ, Lin HM
426 - 429	Effects of decomposition-treatment temperature on infiltration pressure of a surface modified nanoporous silica gel Han A, Punyamurtula VK, Qiao Y
430 - 435	Washcoating of metallic monoliths with a MnCu catalyst for catalytic combustion of volatile organic compounds Barbero BP, Costa-Almeida L, Sanz O, Morales MR, Cadus LE, Montes M
436 - 436	Preparation and characterization of Pt direct deposition on polypyrrole modified Nafion composite membranes for direct methanol fuel cell applications (vol 133, pg 113, 2007) Li L, Zhang YM, Drillet JF, Dittmeyer R, Juttner KM