| 1311 - 1312 |
6th International Symposium on Mixing in Industrial Processes
Xuereb C, Tanguy P |
| 1313 - 1321 |
A measure of mixing from Lagrangian tracking and its application to granular and fluid flow systems
Doucet J, Bertrand F, Chaouki J |
| 1322 - 1330 |
LES and URANS simulations of hydrodynamics in mixing tank: Comparison to PIV experiments
Delafosse A, Line A, Morchain J, Guiraud P |
| 1331 - 1344 |
CFD modeling of gas-liquid-solid mechanically agitated contactor
Panneerselvam R, Savithri S, Surender GD |
| 1345 - 1349 |
Mass-transfer characteristics by surface aeration of large paddle impeller: Application to a polymerization reactor with liquid level change
Yatomi R, Takenaka K, Takahashi K, Tanguy PA |
| 1350 - 1362 |
Mixing and gas dispersion in mineral flotation cells
Evans GM, Doroodchi E, Lane GL, Koh PTL, Schwarz MP |
| 1363 - 1368 |
Mixing by solid particles
Derksen JJ |
| 1369 - 1381 |
Deagglomeration processes in high-shear devices
Baldyga J, Makowski L, Orciuch W, Sauter C, Schuchmann HP |
| 1382 - 1387 |
High-speed visualization of multiphase dispersions in a mixing tank
Guevara-Lopez E, Sanjuan-Galindo R, Cordova-Aguilar MS, Corkidi G, Ascanio G, Galindo E |
| 1388 - 1396 |
Surfactant-covered drops between parallel plates
Janssen PJA, Anderson PD |
| 1397 - 1409 |
Flow pattern, periodicity and energy dissipation in a batch rotor-stator mixer
Utomo AT, Baker M, Pacek AW |
| 1410 - 1422 |
A mapping method based on Gaussian quadrature: Application to viscous mixing
Stobiac V, Heniche M, Devals C, Bertrand F, Tanguy P |
| 1423 - 1433 |
In-mixer measurements for describing mixture evolution during concrete mixing
Cazacliu B |
| 1434 - 1440 |
Mixing analysis of a Newtonian fluid in a 3D planetary pin mixer
Connelly RK, Valenti-Jordan J |
| 1441 - 1446 |
Novel static mixers for surge dampening
Nauman EB, Smith OJ |
| 1447 - 1453 |
Flow and mixing characteristics of sigma-type plate static mixer with splitting and inverse recombination
Ohkawa K, Nakamoto T, Izuka Y, Hirata Y, Inoue Y |
| 1454 - 1461 |
Mixing by rotary jet heads: Indications of the benefits of head rotation under turbulent and transitional flow conditions
Nordkvist M, Vognsen M, Nienow AW, Villadsen J, Gernaey KV |
| 1462 - 1476 |
Modeling flow and residence time distribution in an industrial-scale reactor with a plunging jet inlet and optional agitation
Bai H, Stephenson A, Jimenez J, Jewell D, Gillis P |
