| 793 - 803 |
Modelling and optimization studies on extraction of lemongrass oil from Cymbopogon flexuosus (Steud.) Wats
Desai MA, Parikh J, De AK |
| 804 - 811 |
Continuous alcohol addition in vaporized form and its effect on bubble behavior in a bubble column
Hur YG, Yang JH, Jung H, Lee KY |
| 812 - 825 |
Hydrodynamic forces acting on pipe bends in gas-liquid slug flow
Tay BL, Thorpe RB |
| 826 - 841 |
A one-dimensional plug-flow model of a counter-current spray drying tower
Ali M, Mahmud T, Heggs PJ, Ghadiri M, Djurdjevic D, Ahmadian H, de Juan LM, Amador C, Bayly A |
| 842 - 856 |
Role of nanoparticles on nanofluid boiling phenomenon: Nanoparticle deposition
Vafaei S, Borca-Tasciuc T |
| 857 - 875 |
Asphaltene precipitation and deposition in oil reservoirs - Technical aspects, experimental and hybrid neural network predictive tools
Zendehboudi S, Shafiei A, Bahadori A, James LA, Elkamel A, Lohi A |
| 876 - 890 |
Methanol treatment in gas condensate reservoirs: A modeling and experimental study
Asgari A, Dianatirad M, Ranjbaran M, Sadeghi AR, Rahimpour MR |
| 891 - 902 |
Evolving an accurate model based on machine learning approach for prediction of dew-point pressure in gas condensate reservoirs
Majidi SMJ, Shokrollahi A, Arabloo M, Mahdikhani-Soleymanloo R, Masihi M |
| 903 - 916 |
Performance analysis of three advanced controllers for polymerization batch reactor: An experimental investigation
Hosen MA, Hussain MA, Mjalli FS, Khosravi A, Creighton D, Nahavandi S |
| 917 - 930 |
Robust model predictive control of an industrial partial combustion fluidized-bed catalytic cracking converter
Martins MAF, Zanin AC, Odloak D |
| 931 - 940 |
The process design and simulation for the methanol production on the FPSO (floating production, storage and off-loading) system
Kim WS, Yang DR, Moon DJ, Ahn BS |
| 941 - 953 |
A two-stage approach for the synthesis of inter-plant water networks involving continuous and batch units
Lee JY, Chen CL, Lin CY, Foo DCY |
| 954 - 960 |
Multiplicity analysis of a non-isothermal finite hollow cylindrical catalyst pellet
Juncu G |
| 961 - 988 |
A review of mathematical modeling of fixed-bed columns for carbon dioxide adsorption
Shafeeyan MS, Daud WMAW, Shamiri A |
| 989 - 991 |
Comments on "CFD simulation and My measurement of the flow field generated by modified pitched blade turbine impellers" by Ge et al. [Chem. Eng. Res. Des. (2013), http://dx.doi.org/10.1016/j.cherd.2013.08.024]
Fort I |
| 992 - 993 |
Reply to Comments on "CFD simulation and PINT measurement of the flow field generated by modified pitched blade turbine impellers" by Ge et al. [Chem. Eng. Res. Des. (2013), http://dx.doLorg/10.1016/j.cherd.2013.08.024]
Ge CY, Wang JJ, Gu XP, Feng LF |
