| 1 - 17 |
Numerical investigation of COD reduction in compact bioreactor with bubble plumes
Ul Huda KN, Shimizu K, Gong XB, Takagi S |
| 18 - 25 |
Current density distributions in polymer electrolyte fuel cells: A tool for characterisation of gas distribution in the cell and its state of health
Belhadj M, Aquino A, Heng J, Kmiotek S, Rael S, Bonnet C, Lapicque F |
| 26 - 49 |
Modulation of turbulent flow field in an oscillating grid system owing to single bubble rise
Hoque MM, Mitra S, Evans GM, Sathe MJ, Joshi JB |
| 50 - 63 |
Hydrodynamic characteristics of particles with different roughness and deformability in a liquid fluidized bed
Lopes GC, Bi XT, Epstein N, Baldwin SA, Grace JR |
| 64 - 75 |
Prediction of degree of impregnation in thermoplastic unidirectional carbon fiber prepreg by multi-scale computational fluid dynamics
Ngo SI, Lim YI, Hahn MH, Jung J |
| 76 - 83 |
Removal of gas bubbles from highly viscous non-Newtonian fluids using controlled vibration
Zhan XB, He Y, Shen BJ, Sun ZB, Shi TL, Li XW |
| 84 - 91 |
Evaluating lower flammability limit of flammable mixtures using threshold temperature approach
Chen CC, Liu SH, Kang XY |
| 92 - 104 |
Preparation and characterization of mixed matrix membranes based on Matrimid/PVDF blend and MIL-101(Cr) as filler for CO2/CH4 separation
Rajati H, Navarchian AH, Tangestaninejad S |
| 105 - 115 |
General performance evaluation charts and effectiveness correlations for the design of thermocline heat storage system
Ma Z, Li MJ, Yang WW, He YL |
| 116 - 126 |
Design of flexible multiperiod heat exchanger networks with debottlenecking in subperiods
Kang LX, Liu YZ |
| 127 - 140 |
General correlation for maximum heat transfer to surfaces submerged in gas-fluidized beds
Shah MM |
| 141 - 148 |
Experimental and model studies of p-nitrophenol and phenol separation in the bulk liquid membrane with the application of bond-graph method
Szczepanski P |
| 149 - 156 |
Biorefinery of olive leaves to produce dry oleuropein aglycone: Use of homemade ceramic capillary biocatalytic membranes in a multiphase system
Ranieri G, Mazzei R, Poerio T, Bazzarelli F, Wu ZT, Li K, Giorno L |
| 157 - 167 |
Micro-PIV measurement and CFD simulation of flow field and swirling strength during droplet formation process in a coaxial microchannel
Xiong QQ, Chen Z, Li SW, Wang YD, Xu JH |
| 168 - 181 |
Online bubble size analysis in micro flotation
Gulden SJ, Riedele C, Rollie S, Kopf MH, Nirschl H |
| 182 - 208 |
Assessment of separation efficiency modeling and visualization approaches pertaining to flow and mixing patterns on distillation trays
Vishwakarma V, Schubert M, Hampel U |
| 209 - 221 |
Ab-initio process synthesis using evolutionary programming
Neveux T |
| 222 - 230 |
Effect of mass diffusion upon the thermal-diffusive behavior of a dry vibrated granular bed
Sheng LT, Chiu SL, Hsiau SS |
| 231 - 242 |
Embedding hydrophobic MoS2 nanosheets within hydrophilic sodium alginate membrane for enhanced ethanol dehydration
Song YM, Jiang ZY, Gao BX, Wang HJ, Wang MD, He Z, Cao XY, Pan FS |
| 243 - 255 |
Transport properties and size exclusion effects in wide-pore superficially porous particles
Maier RS, Schure MR |
| 256 - 281 |
Multi-rate state estimation applied to a pilot-scale reactive distillation process
Hasskerl D, Subramanian S, Markert S, Kaiser S, Engell S |
| 282 - 291 |
A Monte-Carlo-based sensitivity analysis of multicomponent diffusion in porous catalysts
Donaubauer PJ, Hinrichsen O |
