| 3485 - 3494 |
The heat transfer coefficient for a freely moving sphere in a bubbling fluidised bed
Parmar MS, Hayhurst AN |
| 3495 - 3504 |
Effects of the calcination conditions on the mechanical properties of a PCoMo/Al2O3 hydrotreating catalyst
Wu DF, Li YD, Shi YH, Fang ZP, Wu DH, Chang L |
| 3505 - 3520 |
A description of phase inversion behaviour in agitated liquid-liquid dispersions under the influence of the Marangoni effect
Yeo LY, Matar OK, Perez de Ortiz ES, Hewitt GF |
| 3521 - 3542 |
Lift force in bubbly suspensions
Sankaranarayanan K, Sundaresan S |
| 3543 - 3555 |
An investigation of liquid maldistribution in trickle beds
Tsochatzidis NA, Karabelas AJ, Giakoumakis D, Huff GA |
| 3557 - 3563 |
Re-entrainment in wave-plate mist eliminators
Azzopardi BJ, Sanaullah KS |
| 3565 - 3574 |
Hydrodechlorination of carbon tetrachloride to chloroform in the liquid phase with a Pd/carbon catalyst. Study of the mass transfer steps
Gomez-Sainero LM, Seoane XL, Tijero E, Arcoya A |
| 3575 - 3580 |
Influence of pressure on the gas hold-up of aqueous activated carbon slurries in a down flow jet loop reactor
Tinge JT, Casado AJR |
| 3581 - 3592 |
Gasification reactivity of charcoal with CO2. Part I: Conversion and structural phenomena
Struis RPWJ, von Scala C, Stucki S, Prins R |
| 3593 - 3602 |
Gasification reactivity of charcoal with CO2. Part II: Metal catalysis as a function of conversion
Struis RPWJ, von Scala C, Stucki S, Prins R |
| 3603 - 3610 |
Thermal stability of organo-chromium or chromium organic complexes and vapor pressure measurements on tris(2,4-pentanedionato)chromium(III) and hexacarbonyl chromium(0) by TG-based transpiration method
Pankajavalli R, Mallika C, Sreedharan OM, Raghunathan VS, Premkumar PA, Nagaraja KS |
| 3611 - 3620 |
Deactivation behaviour of the catalyst in solid acid catalyzed alkylation: effect of pore mouth plugging
Sahebdelfar S, Kazemeini M, Khorasheh F, Badakhshan A |
| 3621 - 3638 |
The influence of DEM simulation parameters on the particle behaviour in a V-mixer
Kuo HP, Knight PC, Parker DJ, Tsuji Y, Adams MJ, Seville JPK |
| 3639 - 3647 |
Spreading of an inviscid drop impacting on a liquid film
Davidson MR |
| 3649 - 3658 |
Experimental verification of the scaling relationships for bubbling gas-fluidised beds using the PEPT technique
Stein M, Ding YL, Seville JPK |
| 3659 - 3669 |
Impact attrition of particulate solids. Part 1: A theoretical model of chipping
Ghadiri M, Zhang Z |
| 3671 - 3686 |
Impact attrition of particulate solids. Part 2: Experimental work
Zhang Z, Ghadiri M |
| 3687 - 3701 |
On the importance of material frame-indifference and lift forces in multiphase flows
Massoudi M |
| 3703 - 3714 |
Drop mixing in suspension polymerisation
Hashim S, Brooks BW |
| 3715 - 3732 |
On the solution of population balance equations (PBE) with accurate front tracking methods in practical crystallization processes
Lim YI, Le Lann JM, Meyer XM, Joulia X, Lee G, Yoon ES |
| 3733 - 3744 |
Solid dissolution in a batch process with intraparticle diffusion and lumped kinetics
Reverberi AP, Esposito A, Veglio F |
| 3745 - 3747 |
Flow due to a stretching boundary with partial slip-an exact solution of the Navier-Stokes equations
Wang CY |
| 3749 - 3753 |
Practical chaotic mixing
Alvarez-Hernandez MM, Shinbrot T, Zalc J, Muzzio FJ |
| 3755 - 3755 |
Power input in closed stirred vessels
Fort I |
