| 7831 - 7835 |
Sol-gel production of zirconia nanoparticles with a new organic precursor
Suciu C, Gagea L, Hoffmann AC, Mocean M |
| 7836 - 7849 |
Gravity pipe flow of polymeric bulk solids in pneumatic conveying system
Tamara AJ, Yap C, Mannan MA |
| 7850 - 7863 |
Tomographic imaging during reactive precipitation in a stirred vessel: Mixing with chemical reaction
Stanley SJ |
| 7864 - 7883 |
Probing surface structure via time-of-escape analysis of gas in Knudsen regime
Feres R, Yablonsky G |
| 7884 - 7888 |
Thermodynamic and Raman spectroscopic studies on H-2+tetrahydrofuran plus water and H-2+tetra-n-butyl ammonium bromide plus water mixtures containing gas hydrates
Hashimoto S, Murayama S, Sugahara T, Sato H, Ohgaki K |
| 7889 - 7908 |
Effects of an electrostatic field in pneumatic conveying of granular materials through inclined and vertical pipes
Lim EWC, Zhang Y, Wang CH |
| 7909 - 7923 |
Photooxidation and biotrickling filtration for controlling industrial emissions of trichloroethylene and perchloroethylene
Den W, Ravindran V, Pirbazari M |
| 7924 - 7932 |
Evolutionary search for globally optimal constrained stable cycles
Skowron M, Styczen K |
| 7933 - 7948 |
Rational design of shape selective separation and catalysis - I: Concepts and analysis
Gounaris CE, Floudas CA, Wei J |
| 7949 - 7962 |
Rational design of shape selective separation and catalysis - II: Mathematical model and computational studies
Gounaris CE, Wei J, Floudas CA |
| 7963 - 7978 |
A numerical investigation of air flow during tablet compression
Kremer DM |
| 7979 - 7990 |
Interfacial area concentration in boiling bubbly flow systems
Hibiki T, Lee TH, Lee JY, Ishii M |
| 7991 - 8003 |
Predicting precipitate particle breakage in a pipeline: Effect of agitation intensity during precipitate formation
Zumaeta N, Byrne EP, Fitzpatrick JJ |
| 8004 - 8009 |
Capillary stability limits for liquid metal in melt spinning
Byrne CJ, Weinstein SJ, Steen PH |
| 8010 - 8027 |
A discussion on transport phenomena and three-way kinetics of monolithic converters
Holder R, Bollig M, Anderson DR, Hochmuth JK |
| 8028 - 8039 |
A generalized model to predict the liquid-liquid equilibrium in the systems furfural plus lubricating oils
Coto B, van Grieken R, Pena JL, Espada JJ |
| 8040 - 8049 |
Laser-based planar imaging of nano-particle fluidization: Part II -mechanistic analysis of nanoparticle aggregation
Wang XS, Palero V, Soria J, Rhodes MJ |
| 8050 - 8059 |
Influence of carbon dioxide partial pressure and fluidization velocity on activated carbons prepared from scrap car tyre in a fluidized bed
Min A, Harris AT |
| 8060 - 8074 |
Relationship between packing structure and porosity in fixed beds of equilateral cylindrical particles
Zhang W, Thompson KE, Reed AH, Beenken L |
| 8075 - 8084 |
Novel bioreactor design for the culture of suspended mammalian cells. Part 1: Mixing characterization
Cervantes MIS, Lacombe J, Muzzio FJ, Alvarez MM |
| 8085 - 8088 |
A note on permeability simulation of multifilament woven fabrics
Wang Q, Maze B, Tafreshi HV, Pourdeyhimi B |
| 8089 - 8094 |
Fluidization with viscoelastic polymer solutions in the transition flow region
Siska B, Machac I |
