| 517 - 521 |
Characterization of crude feed and products from operating conditions by using continuous probability functions and inferential models
Lee DH, Lee ES, Park SJ |
| 522 - 530 |
Simulation of fixed bed reactor for dimethyl ether synthesis
Lee SB, Cho W, Park DK, Yoon ES |
| 531 - 539 |
Prediction of concentration and temperature profiles for non-isothermal ethane cracking in a pipe reactor
Garg RK, Krishnan VV, Srivastava VK |
| 540 - 546 |
Nonlinear model based control of two-product reactive distillation column
Han M, Clough DE |
| 547 - 554 |
Thermodynamic features of the Cu-ZSM-5 catalyzed NO decomposition reaction
Lee DK |
| 555 - 559 |
Platinum electroless deposition on Nafion membrane for PEM fuel cells
Hawut W, Hunsom M, Pruksathorn K |
| 560 - 565 |
On the modeling of electro-hydrodynamic flow in a wire-plate electrostatic precipitator
Chun YN, Yeom DS |
| 566 - 569 |
Preparation and electrochemical properties of Li1.1Mn2O3.9F0.1 material for lithium secondary battery
Lee YS, Cho SJ, Yoshio M |
| 570 - 575 |
Optimum condition of membrane electrode assembly fabrication for PEM fuel cells
Nakrumpai B, Pruksathorn K, Piumsomboon P |
| 576 - 580 |
Gasification characteristics of combustible wastes in a 5 ton/day fixed bed gasifier
Lee SH, Choi KB, Lee JG, Kim JH |
| 581 - 591 |
Analytical methods of size distribution for organic matter in water and wastewater
Shon HK, Kim SH, Erdei L, Vigneswaran S |
| 592 - 594 |
Feasibility of bamboo-based activated carbons for an electrochemical supercapacitor electrode
Kim C, Lee JW, Kim JH, Yang KS |
| 595 - 600 |
Enhancement of UV disinfection efficiency by arraying inclined lamps
Lim SJ, Lee YJ |
| 601 - 606 |
Modification of lipase from Candida rugosa with poly(ethylene oxide-co-maleic anhydride) and its separation using aqueous two-phase partition system
Park K, Lee S, Maken S, Koh W, Min B, Park J |
| 607 - 609 |
Purification of recombinant Pfu DNA polymerase using a new JK110 resin
Sun Z, Cai J |
| 610 - 616 |
Kinetics of volume expansion during infusion of Ringer’s solution based on single volume model
Choi KT, Yeo YK |
| 617 - 624 |
Performance study on ultrafiltration of Kraft black liquor and membrane characterization using Spiegler-Kedem model
Sarkar P, Datta S, Bhattacharjee C, Bhattacharya PK, Gupta BB |
| 625 - 630 |
Characteristics and recognition mechanism of monolithic poly(methacrylic acid-ethylene glycol dimethacrylate) column
Yan H, Jin L, Row KH |
| 631 - 637 |
Measurement and modelling of phase equilibria for ethanol+water+1-pentanol at isobaric condition
Goenaga JM, Gonzalez-Olmos R, Iglesias M, Resa JM |
| 638 - 644 |
Adsorption and desorption characteristics of 2-methyl-4-chlorophenoxyacetic acid onto activated carbon
Cho SY, Park SS, Kim SJ, Kim TY |
| 645 - 649 |
Reaction rate of carbon dioxide in glycidyl methacrylate solution using tricaprylylmethylammonium chloride as a catalyst
Park SW, Park DW, Lee JW |
| 650 - 657 |
A new correlation for VLE data: Application to binary mixtures containing nitrogen
Mulero A, Larrey D, Cuadros F |
| 658 - 662 |
Drying performance of a tumbler dryer with condenser
Lee KS, Yang B, Pyo SY, Kim HG, Lee DH, Kim SD |
| 663 - 668 |
Preparation of powdered activated carbon from rice husk and its methane adsorption properties
Balathanigaimani MS, Kang HC, Shim WG, Kim C, Lee JW, Moon H |
| 669 - 671 |
Spectral dependency of Eu2+-activated silicate phosphors on the composition for LED application
Kim SH, Lee HJ, Kim KP, Yoo JS |
| 672 - 677 |
Effects of oil type on the properties of short oil alkyd coating materials
Atimuttigul V, Damrongsakkul S, Tanthapanichakoon W |
| 678 - 682 |
Fabrication of high aspect ratio nanostructures using capillary force lithography
Suh KY, Jeong HE, Park JW, Lee SH, Kim JK |
| 683 - 687 |
Synthesis of aluminum isopropoxide from aluminum dross
Yoo SJ, Yoon HS, Jang HD, Lee JW, Hong ST, Lee MJ, Lee SI, Jun KW |
