| 1035 - 1035 |
Science to business center: Close links between business and science
Oberholz A |
| 1051 - 1064 |
Product design - Possibilities of product design
Rahse W |
| 1065 - 1068 |
Break-up of film flow on inclined surfaces
Hoffmann A, Ausner I, Repke JU, Wozny G |
| 1068 - 1072 |
Linear stability analysis of the flow of a draining foam lamella
Runowski T, Pahl MH |
| 1072 - 1077 |
Mass transfer measurements on individual drops by laser-induced fluorescence (LIF)
Gneist G, Schollenberger S, Bart HJ |
| 1078 - 1086 |
Disintegration behavior of particles in fluidized beds application of a constant surface-related attrition coefficient
Rangelova J, Morl L, Heinrich S, Peters R |
| 1086 - 1092 |
Composition and catalytic activity of hierarchically structured oxide catalysts - Part 3: Influence of calcination temperature on stability and catalytic behavior of supported V2O5/TiO2 catalysts
Stelzer JB, Feldhoff A, Caro J, Fait M, Habel D, Feike E, Schubert H |
| 1092 - 1096 |
Increasing the deposition of ultrafine diesel particulates by microsphere coating on metal-based catalyst structures
Messerer A, Schmid HJ, Knab C, Poschl U, Niessner R |
| 1096 - 1105 |
Differential loop-type reactors for generation of reaction kinetic data for fixed bed catalytic reactions - Part 2: Theory and real behavior
Hesselbarth B, Adler R |
| 1105 - 1110 |
ReadOpt - Reactor design optimization by heuristic MINLP methods
Till J, Sand G, Engell S, Von Trotha T, Schembecker G |
| 1110 - 1111 |
Standard representation of the fracture strength of various solids as a function of particle diameter
Zlokarnik M |
| 1111 - 1116 |
Simulation of the hydrodynamics in a jet scrubber
Loos T, Mollekopf N |
| 1116 - 1116 |
Comparison of turbulence models and wall functions for numerical calculation of turbulent heat transfer in pipe flow
Michel H |
| 1155 - 1158 |
The third wave-biotechnology conquers the chemical industry
Bachmann R, Budde F, Riese J |
| 1159 - 1166 |
Characterization of the slurry fermentation for modeling
Kunz B, Hempel K, Glover K |
| 1167 - 1170 |
Improvement of the oxidative stability of fatty acid methyl esters with antioxidants limitations of the rancimat test
Dittmar T, Ondruschka B, Haupt J, Lauterbach M |
| 1170 - 1179 |
Determination of the influence of fat raw material and process technology on the oxidative stability of fatty acid methyl esters
Dittmar T, Ondruschka B, Haupt J, Lauterbach M |
| 1179 - 1189 |
Input and elimination of hazardous substances in municipal sewage treatment plants
Fahlenkamp H, Hannich CB, Mohle E, Nothe T, Ries T |
| 1189 - 1197 |
Experimental study and modeling of the operating performance of an ultrasonic reactor for thermoacoustic treatment of liquids
Heinz V, Zenker M |
