| 1421 - 1428 |
Unsteady RANS and detached eddy simulation of the multiphase flow in a co-current spray drying
Gimbun J, Muhammad NIS, Law WP |
| 1429 - 1439 |
Experimental research on breakup of 2D power law liquid film
Xu LX, Xia ZY, Zhang MZ, Du Q, Bai FQ |
| 1440 - 1446 |
Rheological and drag reduction properties of hydroxypropyl xanthan gum solutions
Tian M, Fang B, Jin LP, Lu YJ, Qiu XH, Jin H, Li KJ |
| 1447 - 1452 |
Measurment of gas-liquid two-phase slug flow with a Venturi meter based on blind source separation
Wang WW, Liang X, Zhang MZ |
| 1453 - 1459 |
Movement of dispersed droplets of W/O emulsion in a uniform DC electrostatic field: Simulation on droplet coalescence
Zhang J |
| 1460 - 1468 |
Computational fluid dynamic simulations on liquid film behaviors at flooding in an inclined pipe
Chen JY, Tang Y, Zhang W, Wang YC, Qiu LM, Zhang XB |
| 1469 - 1474 |
Production of glycerol carbonate via reactive distillation and extractive distillation: An experimental study
Wang HJ, Pang L, Yang C, Liu YH |
| 1475 - 1483 |
Genetic algorithm for short-term scheduling of make-and-pack batch production process
Wongthatsanekorn W, Phruksaphanrat B |
| 1484 - 1501 |
A novel 3-layer mixed cultural evolutionary optimization framework for optimal operation of syngas production in a Texaco coal-water slurry gasifier
Cao CW, Zhang YK, Yu T, Gu XS, Xin Z, Li J |
| 1502 - 1508 |
Combined mass and heat exchange network synthesis based on stage-wise superstructure model
Liu LL, Du J, Yang FL |
| 1509 - 1517 |
High dimension feature extraction based visualized SOM fault diagnosis method and its application in p-xylene oxidation process
Tian Y, Du WL, Qian F |
| 1518 - 1522 |
Simultaneous optimization of heat-integrated crude oil distillation systems
Luo YQ, Wang LW, Wang H, Yuan XG |
| 1523 - 1529 |
Bifurcation control and eigenstructure assignment in continuous solution polymerization of vinyl acetate
Zhang N, Qiu T, Chen BZ |
| 1530 - 1535 |
Equation oriented method for Rectisol wash modeling and analysis
Gao N, Zhai C, Sun W, Zhang XY |
| 1536 - 1541 |
A procedure for design of hydrogen networks with multiple contaminants
Wang XF, Wang Z, Zhao HP, Liu ZY |
| 1542 - 1550 |
Adsorption characteristics of construction waste for heavy metals from urban stormwater runoff
Wang JL, Zhang PP, Yang LQ, Huang T |
| 1551 - 1556 |
Removal of diclofenac from aqueous solution with multi-walled carbon nanotubes modified by nitric acid
Hu X, Cheng Z |
| 1557 - 1564 |
Extraction of potassium from K-feldspar via the CaCl2 calcination route
Yuan B, Li C, Liang B, Lu L, Yue HR, Sheng HY, Ye LP, Xie HP |
| 1565 - 1571 |
The role of the symmetry and the flexibility of the anion on the characteristics of the nanostructures and the viscosities of ionic liquids
Qi JG, Hu YF, Zhao YM, Li JG |
| 1572 - 1578 |
Influence of surface etching pretreatment on PEO process of eutectic Al-Si alloy
Li K, Li WF, Zhang GG, Wang M, Tang P |
