1 - 3 |
Toxic combustion byproducts - Preface Kennedy IM |
5 - 30 |
Thermal reactions of 2-chloro-1,1,1,2-tetrafluoroethane Difelice JJ, Ritter ER |
31 - 50 |
Low pressure flame studies of halon replacement combustion: Characterization of byproducts and formation mechanisms McIlroy A, Johnson LK |
51 - 67 |
Destruction chemistry of dimethyl methylphosphonate in H-2/O-2/Ar flame studied by molecular beam mass spectrometry Korobeinichev OP, Ilyin SB, Mokrushin VV, Shmakov AG |
69 - 89 |
Gas-phase pyrolysis of diethyl methylphosphonate Zegers EJP, Fisher EM |
91 - 129 |
Aromatic hydrocarbon emissions from burning poly(styrene), poly(ethylene) and PVC particles at high temperatures Panagiotou T, Levendis YA, Carlson J, Dunayevskiy YM, Vouros P |
129 - 151 |
Investigation of the kinetics of thermal degradation of commodity plastics Bockhorn H, Hornung A, Hornung U, Teepe S, Weichmann J |
153 - 166 |
The destruction of methylene chloride in lean post-flame conditions Vitovec W, Koshland CP, Lucas D, Sawyer RF |
167 - 181 |
PAH formation in the premixed flame of ethane Castaldi MJ, Senkan SM |
183 - 209 |
Aromatic and linear hydrocarbon concentration measurements in a non-premixed flame McEnally CS, Pfefferle LD |
211 - 287 |
Modeling of aromatic and polycyclic aromatic hydrocarbon formation in premixed methane and ethane flames Marinov NM, Pitz WJ, Westbrook CK, Castaldi MJ, Senkan SM |
289 - 315 |
Mechanisms of flame quenching by chlorine in well-stirred reactors Casias CR, McKinnon JT |
317 - 337 |
High-temperature scrubbing of halogenated compounds Zamansky VM, Kryder GD, Seeker WR |
339 - 357 |
The interaction of fuel-bound nitrogen and fuel-bound chlorine during air-staged incineration Mao FH, Barat RB |
359 - 373 |
Formaldehyde formation in small gas burners Ashman PJ, Haynes BS |
375 - 397 |
Effect of fuel gas composition and excess air on VOC emissions from a small-scale, industrial-style burner Edwards CF, Goix PJ |
399 - 426 |
An evaluation of emissions from laminar, underventilated hydrocarbon diffusion flames Skaggs RR, Tolocka MP, Miller JH |
427 - 453 |
Mixing characterization of transient puffs in a rotary kiln incinerator Schenck HW, Wendt JOL, Kerstein AR |
455 - 478 |
Effects of copper contamination on dioxin emissions from CFC incineration Lee CW, Ryan JV, Hall RE, Kryder GD, Springsteen BR |
479 - 498 |
Formation and destruction of hexavalent chromium in a laboratory swirl flame incinerator Linak WP, Ryan JV, Wendt JOL |
499 - 515 |
Waste and sorbent parameters affecting mechanisms of transient emissions from rotary kiln incineration Lemieux PM, Linak WP, Wendt JOL |
517 - 539 |
Sorbent capture of lead and barium in a bench-scale incinerator combusting simulated waste lubricating oil Chun P, Hall MJ |
541 - 574 |
New nonintrusive laser diagnostic tools for design and optimization of technically applied combustion systems Luczak A, Beushausen V, Eisenberg S, Knapp M, Schluter H, Andresen P, Malobabic M, Schmidt A |
567 - 582 |
Jet-REMPI for the detection of trace gas compounds in complex gas mixtures, a tool for kinetic research and incinerator process control Oser H, Thanner R, Grotheer HH |
583 - 606 |
Infrared tomographic inversion for combustion and incineration Chojnacki AM, Sarma A, Wolga GJ, Torniainen ED, Gouldin FC |