| 1 - 9 |
CO and trans-cinnamaldehyde as corrosion inhibitors of I825, L80-13Cr and N80 alloys in concentrated HCl solutions at high pressure and temperature
Cabello G, Funkhouser GP, Cassidy J, Kiser CE, Lane J, Cuesta A |
| 10 - 16 |
Photosensitization of TiO2 nanotube arrays with CdSe nanoparticles and their photoelectrochemical performance under visible light
Xue JB, Shen QQ, Liang W, Liu XG, Yang F |
| 17 - 22 |
Structural and electrochemical performance of layered high-Mn cathode materials Li1+n[NimComMn1-2m]O-2 for lithium rechargeable batteries
Li F, Zhao SX, Wang KZ, Li BH, Nan CW |
| 23 - 32 |
Comparing anode and cathode electrode/electrolyte interface composition and morphology using soft and hard X-ray photoelectron spectroscopy
Malmgren S, Ciosek K, Hahlin M, Gustafsson T, Gorgoi M, Rensmo H, Edstrom K |
| 33 - 41 |
Evaluation of change in nanostructure through the heat treatment of carbon materials and their durability for the start/stop operation of polymer electrolyte fuel cells
Zhao XJ, Hayashi A, Noda Z, Kimijima K, Yagi I, Sasaki K |
| 42 - 51 |
Investigations of lithium-sulfur batteries using electrochemical impedance spectroscopy
Canas NA, Hirose K, Pascucci B, Wagner N, Friedrich KA, Hiesgen R |
| 52 - 57 |
The benzoquinone-mediated electrochemical microbial biosensor for water biotoxicity assay
Li JM, Yu Y, Wang YN, Qian J, Zhi JF |
| 58 - 65 |
Evaluation of Pt/C catalyst degradation and H2O2 formation changes under simulated PEM fuel cell condition by a rotating ring-disk electrode
Ono K, Yasuda Y, Sekizawa K, Takeuchi N, Yoshida T, Sudoh M |
| 66 - 78 |
Reduced order model (ROM) of a pouch type lithium polymer battery based on electrochemical thermal principles for real time applications
Li XY, Xiao M, Choe SY |
| 79 - 85 |
A disposable electrochemical immunosensor arrays using 4-channel screen-printed carbon electrode for simultaneous detection of Escherichia coli O157:H7 and Enterobacter sakazakii
Dou WC, Tang WL, Zhao GY |
| 86 - 91 |
Effects of fuel velocity in anode channel on power generation property of tubular solid oxide fuel cells using LaGaO3 electrolyte film
Watanabe N, Inoishi A, Ooe T, Kawakami A, Shigefuji H, Ishihara T |
| 92 - 98 |
Polyvinylpyrrolidone (PVP) assisted synthesized nano-LiFePO4/C composite with enhanced low temperature performance
Huang GL, Li W, Sun HZ, Wang JW, Zhang JP, Jiang HX, Zhai F |
| 99 - 104 |
Morphology of hydrothermally synthesized ZnO nanoparticles tethered to carbon nanotubes affects electrocatalytic activity for H2O2 detection
Wayu MB, Spidle RT, Devkota T, Deb AK, Delong RK, Ghosh KC, Wanekaya AK, Chusuei CC |
| 105 - 111 |
Ultrasensitive non-enzymatic and non-mediator electrochemical biosensor using nitrogen-doped graphene sheets for signal amplification and nanoporous alloy as carrier
Feng R, Zhang Y, Ma HM, Wu D, Fan HX, Wang H, Li H, Du B, Wei Q |
| 112 - 119 |
Synthesis of poly(aniline-co-3-amino-4-hydroxybenzoic acid) and its enhanced redox activity under highly basic conditions
Chen CX, Ding GQ, Zhou D, Lu XH |
| 120 - 131 |
Cathodic behaviour and oxoacidity reactions of samarium (III) in two molten chlorides with different acidity properties: The eutectic LiCl-KCl and the equimolar CaCl2-NaCl melt
Castrillejo Y, de la Fuente C, Vega M, de la Rosa F, Pardo R, Barrado E |
| 132 - 142 |
Kinetic Monte Carlo simulation of the electrodeposition of polycrystalline copper: Effects of substrates and deposition parameters on the microstructure of deposits
Liu J, Liu CQ, Conway PP |
| 143 - 149 |
High rate capability of Co-doped LiFePO4/C
Gao HY, Jiao LF, Yang JQ, Qi Z, Wang YJ, Yuan HT |
| 150 - 159 |
Decolourization and degradation of CI Acid Red 73 by anodic oxidation and the synergy technology of anodic oxidation coupling nanofiltration
Xu L, Guo Z, Du LS, He J |
| 160 - 166 |
Effect of proton numbers of phosphate-based co-adsorbents on the photovoltaic performance of dye-sensitized solar cells
Shen HP, Li X, Li JB, Wang WL, Lin H |
| 167 - 174 |
Electrochemical mineralization of sulfamethoxazole by Ti/SnO2-Sb/Ce-PbO2 anode: Kinetics, reaction pathways, and energy cost evolution
Lin H, Niu JF, Xu JL, Li Y, Pan YH |
| 175 - 183 |
Electrochemical biosensor for creatinine based on the immobilization of creatininase, creatinase and sarcosine oxidase onto a ferrocene/horseradish peroxidase/gold nanoparticles/multi-walled carbon nanotubes/Teflon composite electrode
Serafin V, Hernandez P, Agui L, Yanez-Sedeno P, Pingarron JM |
| 184 - 191 |
Synthesis of LiCr0.2Ni0.4Mn1.4O4 with superior electrochemical performance via a two-step thermo polymerization technique
Nie X, Zhong BH, Chen MZ, Yin K, Li L, Liu H, Guo XD |
| 192 - 201 |
Revisiting zinc passivation in alkaline solutions
Thomas S, Cole IS, Sridhar M, Birbilis N |
| 202 - 209 |
Determination of the fungicide picoxystrobin using anodic stripping voltammetry on a metal film modified glassy carbon electrode
Dornellas RM, Franchini RAA, Aucelio RQ |
| 210 - 215 |
Superior charge-transfer kinetics of NASICON-type Li3V2(PO4)(3) cathodes by multivalent Al3+ and Cl- substitutions
Son JN, Kim SH, Kim MC, Kim GJ, Aravindan V, Lee YG, Lee YS |
| 216 - 225 |
Investigation of carbon monoxide tolerance of platinum nanoparticles in the presence of optimum ratio of doped polyaniline with para toluene sulfonic acid and their utilization in a real passive direct methanol fuel cell
Gharibi H, Amani M, Pahlavanzadeh H, Kazemeini M |
| 226 - 230 |
New insight into liquid electrolyte of rechargeable lithium/sulfur battery
Zhang SS |
| 231 - 237 |
An electrochemical approach to study water-D(-)fructose interactions
Mredha MTI, Roy CK, Rahman MM, Mollah MYA, Susan MA |
| 238 - 243 |
Sulfur in hierarchically pore-structured carbon pillars as cathode material for lithium-sulfur batteries
Wang XF, Fang XP, Guo XW, Wang ZX, Chen LQ |
| 244 - 252 |
Direct observation of the electrocrystallization of compound CuInSe2 during the early stages of deposition
Huang HC, Lin CS, Chen FJ, Li WC |
| 253 - 258 |
Electrochemical performance and electroreduction of maleic acid on Ce-doped nano-TiO2 film electrode
Wang FW, Yan XY, Xu M, Li SD, Fang WY |
| 259 - 270 |
Study of the nanosized Li2MnO3: Electrochemical behavior, structure, magnetic properties, and vibrational modes
Amalraj SF, Sharon D, Talianker M, Julien CM, Burlaka L, Lavi R, Zhecheva E, Markovsky B, Zinigrad E, Kovacheva D, Stoyanova R, Aurbach D |
| 271 - 277 |
A Fe2O3 nanoparticle/carbon aerogel composite for use as an anode material for lithium ion batteries
Liu NP, Shen J, Liu D |
| 278 - 288 |
Effect of convective mass transfer on lead-acid battery performance
Kashkooli AG, Farhad S, Fung AS, Chen ZW |
| 289 - 295 |
The state of water in 1-butly-1-methyl-pyrrolidinium bis(trifluoromethanesulfonyl)imide and its effect on Zn/Zn(II) redox behavior
Xu M, Ivey DG, Xie Z, Qu W, Dy E |
| 296 - 303 |
Novel smart stannate based coatings of self-healing functionality for AZ91D magnesium alloy
Hamdy AS, Butt DP |
| 304 - 312 |
Enhancement of heterogeneous electron transfer dynamics tuning single-walled carbon nanotube forest height and density
Lamberti F, Ferraro D, Giomo M, Elvassore N |
| 313 - 319 |
Synergistic corrosion protection for AZ31 Mg alloy by anodizing and stannate post-sealing treatments
Choi YI, Salman S, Kuroda K, Okido M |
| 320 - 325 |
Solid-state photoelectrochemical H-2 generation with gaseous reactants
Iwu KO, Galeckas A, Kuznetsov AY, Norby T |
| 326 - 332 |
Oxidation of formic acid at polycarbazole-supported Pt nanoparticles
Moghaddam RB, Pickup PG |
| 333 - 340 |
Three-dimensional nanoflower-like MnO2 functionalized graphene as catalytically promoted nanolabels for ultrasensitive electrochemiluminescence immunoassay
Su M, Zhang Y, Song XR, Ge SG, Yan M, Yu JH, Huang JD |
| 341 - 348 |
Scaling on stainless steel electrodes in simulated cyanidation leaching processes
Wang SZ, Yang LL, Niu R, Liu ZD |
| 349 - 356 |
Preparation of novel electrochemical glucose biosensors for whole blood based on antibiofouling polyurethane-heparin nanoparticles
Sun C, Niu YL, Tong FY, Mao C, Huang XH, Zhao B, Shen J |
| 357 - 363 |
Relationships between the crystal/interfacial properties and electrochemical performance of LiNi0.33Co0.33Mn0.33O2 in the voltage window of 2.5-4.6 V
Bie XF, Du F, Wang YH, Zhu K, Ehrenberg H, Nikolowski K, Wang CZ, Chen G, Wei YJ |
| 364 - 377 |
A comparative study of the UV-vis spectroelectrochemical behavior of 2-and 3-methylaniline during homo- and copolymerization with 1,2-diaminobenzene
Bilal S, Shah AUA, Holze R |
| 378 - 385 |
Electrosynthesis and characterization of viologen cross linked thiophene copolymer
Gadgil B, Damlin P, Aaritalo T, Kankare J, Kvarnstrom C |
| 386 - 392 |
Porous TiO2(B)/anatase microspheres with hierarchical nano and microstructures for high-performance lithium-ion batteries
Wang J, Zhou YK, Shao ZP |
| 393 - 397 |
Ball-milled Li7MnN4: An attractive negative electrode material for lithium-ion batteries
Panabiere E, Emery N, Bach S, Pereira-Ramos JP, Willmann P |
| 398 - 403 |
Ultrafine palladium nanoparticles grown on graphene nanosheets for enhanced electrochemical sensing of hydrogen peroxide
Chen XM, Cai ZX, Huang ZY, Oyama M, Jiang YQ, Chen X |
| 404 - 408 |
Surface roughened 1-D Au host nanorods for visible light induced photocatalyst
Mao A, Kim WJ, Kim JK, Shin K, Han GY, Park JH |
| 409 - 419 |
Corrosion resistance of three-layer superhydrophobic composite coating on carbon steel in seawater
Yu DY, Tian JT, Dai JH, Wang X |
