| 2343 - 2351 |
Electrochemistry of non-aged 90-10 copper-nickel alloy (UNS C70610) as a function of fluid flow - Part 2: Cyclic voltammetry and characterisation of the corrosion mechanism
Kear G, Barker BD, Stokes KR, Walsh FC |
| 2352 - 2358 |
Fabrication of three-dimensional platinum microstructures with laser irradiation and electrochemical technique
Kikuchi T, Takahashi H, Maruko T |
| 2359 - 2369 |
Investigation of the surface properties and the hydrogen evolution reaction, HER, at thermal rhodium oxide electrodes
Gouveia H, Landers R, Boodts JFC |
| 2370 - 2375 |
Electrochemical impedance spectroscopy study of the passive films of alloy 22 in low pH nitrate and chloride environments
Gray JJ, Orme CA |
| 2376 - 2385 |
In situ FTIR studies of the catalytic oxidation of ethanol on Pt(111) modified by bi-dimensional osmium nanoislands
Santos VP, Del Colle V, de Lima RB, Tremiliosi G |
| 2386 - 2391 |
Mixed-ion linear actuation behaviour of polypyrrole
Kiefer R, Chu SY, Kilmartin PA, Bowmaker GA, Cooney RP, Travas-Sejdic J |
| 2392 - 2400 |
Influence of nanocrystallization on passive behavior of Ni-based superalloy in acidic solutions
Liu L, Li Y, Wang FH |
| 2401 - 2410 |
Relative stabilities of Ce(IV) and Ce(III) limiting carbonate complexes at 5-50 degrees C in Na+ aqueous solutions, an electrochemical study
Larabi-Gruet N, Chausse A, Legrand L, Vitorge P |
| 2411 - 2422 |
Effect of Al on the galvanic ability of Zn-Al coating under thin layer of electrolyte
Yadav AP, Katayama H, Noda K, Masuda H, Nishikata A, Tsuru T |
| 2423 - 2428 |
Microstructures and electrochemical properties of Co-free AB(5)-type hydrogen storage alloys through substitution of Ni by Fe
Wei XD, Liu SS, Dong H, Zhang P, Liu YN, Zhu JW, Yu G |
| 2429 - 2436 |
Monte Carlo study of the electrode solvent primitive model electrolyte interface
Lamperski S, Zydor A |
| 2437 - 2446 |
A characterization of the inhibiting effect of Cu on metastable pitting in dilute Al-Cu solid solution alloys
Kim Y, Buchheit RG |
| 2447 - 2452 |
Nanometer copper-tin alloy anode material for lithium-ion batteries
Ren JG, He XM, Wang L, Pu WH, Jiang CY, Wan CR |
| 2453 - 2460 |
A novel approach to explore Zn based anodes for lithium-ion battery applications
Jayaprakash N, Sathiyanarayanan K, Kalaiselvi N |
| 2461 - 2470 |
A spectroelectrochemical and chemical study on oxidation of hydroxycinnamic acids in aprotic medium
Petrucci R, Astolfi P, Greci L, Firuzi O, Saso L, Marrosu G |
| 2471 - 2477 |
Effect of gel electrolytes containing silica nanoparticles on aluminum corrosion
Li YX, Fedkiw PS |
| 2478 - 2484 |
Carbon-coated tungsten and molybdenum carbides for electrode of electrochemical capacitor
Morishita T, Soneda Y, Hatori H, Inagaki M |
| 2485 - 2491 |
Colloidal submicron-palladium particles stabilized with acetate
Aoki K, Zhao YH, Chen JY |
| 2492 - 2497 |
Catalytic activity of titanium oxide for oxygen reduction reaction as a non-platinum catalyst for PEFC
Kim JH, Ishihara A, Mitsushima S, Kamiya N, Ota KI |
| 2498 - 2505 |
Characterization of pistachio shell-derived carbons activated by a combination of KOH and CO2 for electric double-layer capacitors
Hu CC, Wang CC, Wu FC, Tseng RL |
| 2506 - 2514 |
Analysis of membraneless formic acid microfuel cell using a planar microchannel
Chen FL, Chang MH, Lin MK |
| 2515 - 2519 |
Co-deposition of Al-Cr-Ni alloys using constant potential and potential pulse techniques in AlCl3-NaCl-KCl molten salt
Ueda M, Kigawa H, Ohtsuka T |
| 2520 - 2526 |
Synthesis and electrochemical properties of benzyl-mercapto and dodecyl-mercapto tetrasubstituted manganese phthalocyanine complexes
Agboola B, Ozoemena KI, Westbroek P, Nyokong T |
| 2527 - 2534 |
The influence of frequency on fractal dimension of adsorbed layers
Gasparovic B, Risovic D, Cosovic B, Nelson A |
| 2535 - 2541 |
Electrochemistry behavior of adrenalin, serotonin and ascorbic acid at novel poly rutin modified paraffin-impregnated graphite electrode
Jin GP, Chen QZ, Ding YF, He JB |
| 2542 - 2551 |
Accumulation of uranium on austenitic stainless steel surfaces
Dombovari P, Kadar P, Kovacs T, Somlai J, Rado K, Varga I, Bujak R, Varga K, Halmos P, Borszeki J, Konya J, Nagy NM, Kover L, Varga D, Cserny I, Toth J, Fodor L, Horvath A, Pinter T, Schunk J |
| 2552 - 2561 |
PEM fuel cell reaction kinetics in the temperature range of 23-120 degrees C
Song CJ, Tang YH, Zhang JL, Zhang JJ, Wang HJ, Shen J, McDermid S, Li J, Kozak P |
| 2562 - 2569 |
The electrochemical behavior of cobalt phthalocyanine/platinum as methanol-resistant oxygen-reduction electrocatalysts for DMFC
Lu YH, Reddy RG |
| 2570 - 2579 |
Investigation of corrosion behaviors of Mg-6Gd-3Y-0.4Zr alloy in NaCl aqueous solutions
Guo XW, Chang JW, He SM, Ding WJ, Wang XS |
| 2580 - 2587 |
Classic and local analysis of corrosion behaviour of graphite and stainless steels in polluted phosphoric acid
Iken H, Basseguy R, Guenbour A, Bachir A |
| 2588 - 2594 |
Using an e-tongue based on voltammetric electrodes to discriminate among red wines aged in oak barrels or aged using alternative methods -Correlation between electrochemical signals and analytical parameters
Apetrei C, Apetrei IM, Nevares I, del Alamo M, Parra V, Rodriguez-Mendez ML, De Saja JA |
| 2595 - 2602 |
Characterization of a stirred tank electrochemical cell for water disinfection processes
Polcaro AM, Vacca A, Mascia M, Palmas S, Pompei R, Laconi S |
| 2603 - 2611 |
Preparation and electrochemical behaviour of [Ru(bipy)(4)Cl2Ag]NO3(CHCl3)center dot 6H(2)O}(n) obtained from the self-assembly of trans-Ru(bipy)(4)Cl-2 and AgNO3
Vertova A, Cucchi I, Fermo P, Porta F, Proserpio DM, Rondinini S |
| 2612 - 2619 |
Adsorption of 1,6-hexanediol on Bi single crystal electrodes
Romann T, Lust K, Lust E |
| 2620 - 2624 |
Functionalized carbon support with sulfonated polymer for direct methanol fuel cells
Kim H, Lee W, Yoo D |
| 2625 - 2633 |
Anodic, cathodic and cyclic voltammetric deposition of ruthenium oxides from aqueous RuCl3 solutions
Jow JJ, Lee HJ, Chen HR, Wu MS, Wei TY |
| 2634 - 2639 |
Using photoelectrochemical measurements for distinguishing between direct and indirect hole transfer processes on anatase: Case of oxalic acid
Waldner G, Gomez R, Neumann-Spallart M |
| 2640 - 2648 |
Characterisation of mesoporous polymer films deposited using lyotropic liquid crystal templating
Bender F, Chilcott TC, Coster HGL, Hibbert DB, Gooding JJ |
| 2649 - 2656 |
A simple method for the synthesis of PtRu nanoparticles on the multi-walled carbon nanotube for the anode of a DMFC
Prabhuram J, Zhao TS, Liang ZX, Chen R |
| 2657 - 2660 |
Lithium insertion property of Li(22)V(2)O(5 center dot)nH(2)O
Eguchi M, Wawa K |
| 2661 - 2667 |
Fundamentals of hydrogen evolution reaction and its implications on near-neutral pH stress corrosion cracking of pipelines
Cheng YF |
| 2668 - 2682 |
Numerical optimization of proton exchange membrane fuel cell cathodes
Secanell M, Carnes B, Suleman A, Djilali N |
| 2683 - 2690 |
Electrochemical and spectroelectrochemical characterization of the phthalocyanines with pentafluorobenzyloxy substituents
Koca A, Ozkaya AR, Selcukoglu M, Hamuryudan E |
| 2691 - 2700 |
A comparison study of the capacitive behavior for sol-gel-derived and co-annealed ruthenium-tin oxide composites
Hu CC, Wang CC, Chang KH |
| 2701 - 2709 |
Thermal treatment effect on nanostructured TiO2 films deposited using diethanolamine stabilized precursor sol
Verma A, Agnihotry SA |
| 2710 - 2715 |
In situ FTIR spectra at the Cu electrode/propylene carbonate solution interface
Ikezawa Y, Ariga T |
| 2716 - 2722 |
Anodic decomposition of citric acid on gold and stainless steel electrodes: An in situ-FTIR-spectroscopic investigation
Trettenhahn G, Koberl A |
| 2723 - 2728 |
Structure and electrochemical characteristics of TiV1.1Mn0.9Nix (x=0.1-0.7) alloys
Yin WY, Zhao MS |
