| 1 - 1 |
The 11th China-Japan Symposium on Coal and C-1 Chemistry Preface
Li W, Qin ZF, Naruse I |
| 2 - 8 |
Preparation and applications of hierarchical porous carbons from direct coal liquefaction residue
Zhang JB, Jin LJ, Cheng J, Hu HQ |
| 9 - 13 |
Co-liquefaction of rice straw and coal using different catalysts
Shui HF, Jiang QQ, Cai ZY, Wang ZC, Lei ZP, Ren SB, Pan CX, Li HP |
| 14 - 20 |
Calcium-promoted catalytic activity of potassium carbonate for steam gasification of coal char: Effect of hydrothermal pretreatment
Jiang MQ, Hu J, Wang J |
| 21 - 27 |
Influence of manganese promoter on co-precipitated Fe-Cu based catalysts for higher alcohols synthesis
Ding MY, Qiu MH, Liu JG, Li YP, Wang TJ, Ma LL, Wu CZ |
| 28 - 32 |
Application of gas chromatography/mass spectrometry in studies on separation and identification of organic species in coals
Fan X, Wei XY, Zong ZM |
| 33 - 42 |
Fischer-Tropsch synthesis over cobalt/montmorillonite promoted with different interlayer cations
Hao QQ, Wang GW, Zhao YH, Liu ZT, Liu ZW |
| 43 - 48 |
Promoting effect of carbon dioxide on the dehydrogenation of ethylbenzene over silica-supported vanadium catalysts
Chen SW, Qin ZF, Wang GF, Dong M, Wang JG |
| 49 - 53 |
Investigation on the macromolecular network structure of Xianfeng lignite by a new two-step depolymerization
Pan CX, Wei XY, Shui HF, Wang ZC, Gao J, Wei C, Cao XZ, Zong ZM |
| 54 - 60 |
Facile solid-state synthesis of Cu-Zn-Ocatalysts for novel ethanol synthesis from dimethyl ether (DME) and syngas (CO + H-2)
Wang D, Yang GH, Ma QX, Yoneyama Y, Tan YS, Han YZ, Tsubaki N |
| 61 - 67 |
Organonitrogen compounds identified in degraded wheat straw by oxidation in a sodium hypochlorite aqueous solution
Lu Y, Wei XY, Zong ZM, Lu YC, Cao JP, Fan X, Zhao W, Rong LC, Zhao YP, Li L, Yan HL, Peng YL |
| 68 - 75 |
Effectiveness of crystallitic carbon from coal as milling aid and for hydrogen storage during milling with magnesium
Zhou SX, Chen HP, Ding C, Niu HL, Zhang TH, Wang NF, Zhang QQ, Liu D, Han SN, Yu HG |
| 76 - 85 |
Effects of CaCO3 on slag flow properties at high temperatures
Kong LX, Bai J, Bai ZQ, Guo ZX, Li W |
| 86 - 93 |
Release and removal using sorbents of chromium from a high-Cr lignite in Shenbei coalfield, China
Zhao YC, Zhang JY, Zheng CG |
| 94 - 100 |
Study on the structure and association of asphaltene derived from liquefaction of lignite by fluorescence spectroscopy
Wang ZC, Hu JC, Shui HF, Ren SB, Wei C, Pan CX, Lei ZP, Cui XP |
| 101 - 109 |
In situ synthesis of CuSAPO-34/cordierite and its selective catalytic reduction of nitrogen oxides invehicle exhaust: The effect of HF
Wang JC, Liu ZQ, Feng G, Chang LP, Bao WR |
| 110 - 115 |
Calcination temperature effect on the adsorption and hydrogenated dissociation of CO2 over the NiO/MgO catalyst
Feng J, Ding YJ, Guo YP, Li XH, Li WY |
| 116 - 123 |
Synthesis of light olefins from CO hydrogenation over Fe-Mn catalysts: Effect of carburization pretreatment
Zhang JL, Ma LH, Fan SB, Zhao TS, Sun YH |
| 125 - 136 |
The combustion properties of 1,3,5-trimethylbenzene and a kinetic model
Dievart P, Kim HH, Won SH, Ju YG, Dryer FL, Dooley S, Wang WJ, Oehlschlaeger MA |
| 137 - 147 |
Experimental investigation into the effects of two-stage injection on fuel injection quantity, combustion and emissions in a high-speed optical common rail diesel engine
Herfatmanesh MR, Lu P, Attar MA, Zhao H |
| 148 - 156 |
X-ray diffraction parameters and reaction rate modeling for gasification and combustion of chars derived from inertinite-rich coals
Everson RC, Okolo GN, Neomagus HWJP, dos Santos JM |
| 157 - 166 |
Oil recovery mechanisms and asphaltene precipitation phenomenon in immiscible and miscible CO2 flooding processes
Cao M, Gu YG |
| 167 - 177 |
Coal-derived liquid asphaltenes diffusion and adsorption in supported hydrotreating catalysts
Roussi L, Stihle J, Geantet C, Uzio D, Tayakout-Fayolle M |
| 178 - 183 |
SO2 and NOx emissions from sludge combustion in a CO2/O-2 atmosphere
Shao LM, Fan SS, Zhang H, Yao QS, He PJ |
| 184 - 190 |
The impact of calcium sulfate and inert solids accumulation in post-combustion calcium looping systems
Diego ME, Arias B, Alonso M, Abanades JC |
| 191 - 200 |
Laminar flame speeds of transportation-relevant hydrocarbons and jet fuels at elevated temperatures and pressures
Hui X, Sung CJ |
| 201 - 205 |
Production of DMC-BioD from Pongamia pinnata seed oil using dimethyl carbonate
Panchal BM, Dhoot SB, Deshmukh SA, Sharma MR, Kachole MS |
| 206 - 210 |
Zero emissions of CO2 during the production of liquid fuel from coal and natural gas by combining Fischer-Tropsch synthesis with catalytic dehydrogenation
Huffman GP |
| 211 - 216 |
A novel technique for characterizing sintering propensity of low rank fuels for CFBC boilers
Lawrence A, Ilayaperumal V, Dhandapani KP, Srinivasan SV, Muthukrishnan M, Sundararajan S |
| 217 - 224 |
A comparative analysis of kinetic parameters from TGDTA of Jatropha curcas oil, biodiesel, petroleum diesel and B50 using different methods
Chouhan APS, Singh N, Sarma AK |
| 225 - 233 |
Catalytic upgrading of crude algal oil using platinum/gamma alumina in supercritical water
Duan PG, Bai XJ, Xu YP, Zhang AY, Wang F, Zhang L, Miao J |
| 234 - 240 |
Flame height and lift-off of turbulent buoyant jet diffusion flames in a reduced pressure atmosphere
Hu LH, Wang Q, Delichatsios M, Tang F, Zhang XC, Lu SX |
| 241 - 247 |
Promoting effect of potassium addition to calcined scallop shell supported catalysts for the decomposition of tar derived from different biomass resources
Guan GQ, Kaewpanha M, Hao XG, Wang ZD, Cheng YP, Kasai Y, Abudula A |
| 248 - 255 |
Influence of fatty acid unsaturation degree over exhaust and noise emissions through biodiesel combustion
Redel-Macias MD, Pinzi S, Leiva-Candia DE, Cubero-Atienza AJ, Dorado MP |
| 256 - 278 |
Characterisation of flame development with ethanol, butanol, iso-octane, gasoline and methane in a direct-injection spark-ignition engine
Aleiferis PG, Serras-Pereira J, Richardson D |
| 279 - 284 |
Simultaneous synthesis of biodiesel and zinc oxide nanoparticles using supercritical methanol
Kim M, Lee HS, Yoo SJ, Youn YS, Shin YH, Lee YW |
| 285 - 296 |
Numerical investigations of a hydrogen impinging flame with different finite-rate chemical kinetic mechanisms
Martinez DM, Jiang X |
| 297 - 302 |
Solid-liquid equilibria under high pressure of pure fatty acid methyl esters
Kouakou AC, Le Mapihan K, Pauly J |
| 303 - 308 |
Reaction pathways of anthracene selective catalytic steam cracking using a NiK/Al2O3 catalyst
Pinilla JL, Arcelus-Arrillaga P, Puron H, Millan M |
| 309 - 315 |
The behaviour of mineral matter in fine coal flotation using saline water
Wang B, Peng YJ |
| 316 - 324 |
Investigation on structural features of Shengli lignite through oxidation under mild conditions
Liu FJ, Wei XY, Zhu Y, Gui J, Wang YG, Fan X, Zhao YP, Zong ZM, Zhao W |
| 325 - 335 |
Studying combustion and cyclic irregularity of diethyl ether as supplement fuel in diesel engine
Rakopoulos DC, Rakopoulos CD, Giakoumis EG, Dimaratos AM |
| 336 - 349 |
Fuel suitability for low temperature combustion in compression ignition engines
Han XY, Zheng M, Wang JX |
| 350 - 355 |
Effect of high-frequency alternating electric fields on the behavior and nitric oxide emission of laminar non-premixed flames
Zhang Y, Wu YX, Yang HR, Zhang H, Zhu M |
| 356 - 361 |
Few physical, chemical and fuel related properties of calophyllum inophyllum linn (honne) oil and its blends with diesel fuel for their use in diesel engine
Belagur VK, Chitimi VR |
| 362 - 365 |
Performance and emission characteristics of a DI diesel engine with a nanofuel additive
Lenin MA, Swaminathan MR, Kumaresan G |
| 366 - 372 |
Physicochemical characterization and possible applications of the waste biomass ash from oleoresin industries of India
Abraham R, George J, Thomas J, Yusuff KKM |
| 373 - 378 |
Use of the grey analysis to determine optimal oil agglomeration with multiple performance characteristics
Aslan N |
| 379 - 383 |
Effect of metal contaminants and antioxidants on the storage stability of Jatropha curcas biodiesel
Jain S, Sharma MP |
| 384 - 388 |
Comparison of fuel and emission properties of petro diesel and sunflower biodiesel prepared by optimized production variables
Amini-Niaki SR, Ghazanfari A |
| 389 - 399 |
Coal cleat permeability for gas movement under triaxial, non-zero lateral strain condition: A theoretical and experimental study
Perera MSA, Ranjith PG, Choi SK |
| 400 - 408 |
The use of coal combustion fly ash as a soil amendment in agricultural lands (with comments on its potential to improve food security and sequester carbon)
Ukwattage NL, Ranjith PG, Bouazza M |
| 409 - 416 |
The undiluted, non-catalytic partial oxidation of methane in a flow tube reactor - An experimental study using indirect induction heating
Li CE, Burke N, Gerdes K, Patel J |
| 417 - 426 |
Upgrading fast pyrolysis liquids: Blends of biodiesel and pyrolysis oil
Alcala A, Bridgwater AV |
| 427 - 431 |
Biodiesel production by transesterification of sludge in supercritical conditions
Perez MA, Aracil I, Fullana A |
| 432 - 438 |
Kinetic study of steam catalytic cracking of naphtha on a Fe/ZSM-5 catalyst
Sedighi M, Keyvanloo K, Towfighi J |
| 439 - 444 |
Integrated coal-pyrolysis tar reforming using steelmaking slag for carbon composite and hydrogen production
Cahyono RB, Rozhan AN, Yasuda N, Nomura T, Hosokai S, Kashiwaya Y, Akiyama T |
| 445 - 460 |
Numerical investigation of oxy-natural-gas combustion in a semi-industrial furnace: Validation of CFD sub-models
Galletti C, Coraggio G, Tognotti L |
| 461 - 469 |
Syngas from steam gasification of polyethylene in a conical spouted bed reactor
Erkiaga A, Lopez G, Amutio M, Bilbao J, Olazar M |
| 470 - 475 |
Evaluation of different methodologies to determine the n-paraffin distribution of petroleum fractions
Espada JJ, Fernandez S, Velasco L, Coto B |
| 476 - 483 |
Kinetics study on thermal dissociation of levoglucosan during cellulose pyrolysis
Zhang XL, Yang WH, Blasiak W |
| 484 - 492 |
Process efficiency of biofuel production via gasification and Fischer-Tropsch synthesis
Leibbrandt NH, Aboyade AO, Knoetze JH, Gorgens JF |
| 493 - 502 |
Geopolymers based on spent catalyst residue from a fluid catalytic cracking (FCC) process
Rodriguez ED, Bernal SA, Provis JL, Gehman JD, Monzo JM, Paya J, Borrachero MV |
| 503 - 511 |
Experimental investigation of the effect of diesel-cotton oil-n-butanol ternary blends on phase stability, engine performance and exhaust emission parameters in a diesel engine
Atmanli A, Yuksel B, Ileri E |
| 512 - 519 |
The effects of synthetically designed diesel fuel properties - cetane number, aromatic content, distillation temperature, on low-temperature diesel combustion
Han M |
| 520 - 526 |
Optimization of alkali-extrusion pretreatment with twin-screw for bioethanol production from Miscanthus
Kang KE, Han M, Moon SK, Kang HW, Kim Y, Cha YL, Choi GW |
| 527 - 533 |
Improvement on pozzolanic reactivity of coal gangue by integrated thermal and chemical activation
Li Y, Yao Y, Liu XM, Sun HH, Ni W |
| 534 - 541 |
Optimization of biodiesel production using waste mussel shell catalyst
Rezaei R, Mohadesi M, Moradi GR |
| 542 - 550 |
Light beam reflectance measurement of droplets diameter distribution in crude oil emulsions
Less S, Vilagines R |
| 551 - 558 |
Effect of straw proportion and Ca- and Al-containing additives on ash composition and sintering of wood-straw pellets
Schmitt VEM, Kaltschmitt M |
| 559 - 562 |
High capacity co-precipitated manganese oxides sorbents for oxidative mercury capture
Wiatros-Motyka MM, Sun CG, Stevens LA, Snape CE |
| 563 - 574 |
Predicting the temperature dependent density of biodiesel-diesel-bioethanol blends
Barabas I |
| 575 - 581 |
Nitrogen removal from natural gas using solid boron: A first-principles computational study
Sun Q, Wang M, Li Z, Li P, Wang WH, Tan XJ, Du AJ |
| 582 - 587 |
Effects of ethanol-diesel blends to performance of a DI diesel engine for different injection timings
Murcak A, Hasimoglu C, Cevik I, Karabektas M, Ergen G |
| 588 - 596 |
Standard methyl esters from used frying oils
Kleinova A, Cvengrosova Z, Cvengros J |
| 597 - 607 |
Ethanol utilisation in adiesel engine using dual-fuelling technology
Padala S, Woo C, Kook S, Hawkes ER |
| 608 - 615 |
Research on the slagging characteristics of easy to slagging coal in a pilot scale furnace
Zhou H, Zhou B, Dong K, Ding JZ, Cen KF |
| 616 - 626 |
Spray and combustion characteristics of gasoline and diesel in a direct injection compression ignition engine
Kim K, Kim D, Jung Y, Bae C |
| 627 - 634 |
High pressure desorption equilibrium of lignite obtained by the novel isochoric method
Kokocinska M, Pakowski Z |
| 635 - 646 |
Studies on thermal cracking behavior of vacuum residues in Eureka process
AlHumaidan F, Hauser A, Al-Rabiah H, Lababidi H, Bouresli R |
| 647 - 652 |
Effect of aluminum dust on flammability of gaseous epoxypropane in air
Zhang Q, Tan RM |
| 653 - 660 |
Steam reforming of alpha-methylnaphthalene as a model tar compound over olivine and olivine supported nickel
Michel R, Lamacz A, Krzton A, Djega-Mariadassou G, Burg P, Courson C, Gruber R |
| 661 - 668 |
CAI combustion of gasoline and its mixture with ethanol in a 2-stroke poppet valve DI gasoline engine
Zhang Y, Zhao H, Ojapah M, Cairns A |
| 669 - 678 |
Combustion and emissions characteristics of a dual fuel engine operated on alternative gaseous fuels
Mustafi NN, Raine RR, Verhelst S |
| 679 - 686 |
Deactivation and regeneration of a Ni supported hierarchical Beta zeolite catalyst used in the hydroreforming of the oil produced by LDPE thermal cracking
Aguado J, Serrano DP, Escola JM, Briones L |
| 687 - 692 |
Small-scale storage techniques for fuel chips from short rotation forestry
Manzone M, Balsari P, Spinelli R |
| 693 - 701 |
Synthesis, characterization and properties of anti-sintering nickel incorporated MCM-41 methanation catalysts
Zhang JY, Xin Z, Meng X, Tao M |
