| 1 - 9 |
Mesoscale combustion of ethanol and dimethyl ether over Pt/ZSM-5: Differences in combustion characteristics and catalyst deactivation
Yang WJ, Deng C, Zhou JH, Zhou MY, Wang ZH, Cen KF |
| 10 - 18 |
Mechanism study of degradative solvent extraction of biomass
Zhu XQ, Xue Y, Li X, Zhang Z, Sun W, Ashida R, Miura K, Yao H |
| 19 - 27 |
Molecular simulation of CO2/CH4 self- and transport diffusion coefficients in coal
Zhao YL, Feng YH, Zhang XX |
| 28 - 32 |
Theoretical conductivity analysis of surface modification agent treated proppant II - Channel fracturing application
Zhang JC, Hou JR |
| 33 - 40 |
The use of LDI-TOF imaging mass spectroscopy to study heated coal with a temperature gradient incorporating the plastic layer and semi-coke
Stanger R, Tran QA, Xie W, Smith N, Lucas J, Yu JL, Kennedy E, Stockenhuber M, Wall T |
| 41 - 49 |
Predicting ash deposition behaviour for co-combustion of palm kernel with coal based on CFD modelling of particle impaction and sticking
Yang X, Ingham D, Ma L, Williams A, Pourkashanian M |
| 50 - 58 |
Effect of inhibitor gases on hydrogen flame propagation in a confined tee pipe (Part I)
Emami SD, Kasmani RM, Hamid MD, Hassan CRC, Sulaiman SZ |
| 59 - 67 |
A new active site/intermediate kinetic model for K2CO3-catalyzed steam gasification of ash-free coal char
Wu XT, Tang J, Wang J |
| 68 - 74 |
Emission factors of gaseous pollutants from small scale combustion of biofuels
Hrdlicka J, Skopec P, Dlouhy T, Hrdlicka F |
| 75 - 85 |
Synergy effects of ions, resin, and asphaltene on interfacial tension of acidic crude oil and low-high salinity brines
Lashkarbolooki M, Riazi M, Ayatollahi S, Hezave AZ |
| 86 - 93 |
Experimental investigation of aerodynamic agglomeration of fine ash particles from a 330 MW PC-fired boiler
Chen DL, Wu K, Mi JC |
| 94 - 104 |
3-D coupled CFD model of a periodic operation of a heating flue and coke ovens in a coke oven battery
Smolka J, Slupik L, Fic A, Nowak AJ, Kosyrczyk L |
| 105 - 114 |
Effect of pongamia oil methyl ester-diesel blend on lubricating oil degradation of di compression ignition engine
Gopal KN, Raj RTK |
| 115 - 122 |
Amino acid-functionalized heteropolyacids as efficient and recyclable catalysts for esterification of palmitic acid to biodiesel
Han XX, Chen KK, Yan W, Hung CT, Liu LL, Wu PH, Lin KC, Liu SB |
| 123 - 133 |
Extended EDC local extinction model accounting finite-rate chemistry for MILD combustion
Aminian J, Galletti C, Tognotti L |
| 134 - 144 |
Modelling the Gieseler fluidity of coking coals modified by multicomponent plastic wastes
Gayo F, Garcia R, Diez MA |
| 145 - 151 |
Effect of freeze storage on hemicellulose degradation and enzymatic hydrolysis by dilute-acid pretreatment of Mongolian oak
Jeong HS, Jang SK, Kim HY, Yeo H, Choi JW, Choi IG |
| 152 - 158 |
Sorbitol transformation into aromatics: A comparative evaluation of Ni/HZSM-5 and Ni/H beta
Zhang Q, Tan J, Wang TJ, Zhang Q, Ma LL, Qiu SB, Weng YJ |
| 159 - 165 |
Calcium diglyceroxide synthesized by mechanochemical treatment, its characterization and application as catalyst for fatty acid methyl esters production
Lukic I, Kesic Z, Zdujic M, Skala D |
| 166 - 172 |
Ilmenite-CO reduction kinetics
Perreault P, Patience GS |
| 173 - 184 |
Separate effect of H-2, CH4 and CO on diesel engine performance and emissions under partial diesel fuel replacement
Hernandez JJ, Lapuerta M, Barba J |
| 185 - 192 |
NOx sensor ammonia cross-sensitivity estimation with adaptive unscented Kalman filter for Diesel-engine selective catalytic reduction systems
Jiang K, Cao EM, Wei LJ |
| 193 - 204 |
Chemical association and mobility of trace elements in 13 different fuel incineration fly ashes
Saqib N, Backstrom M |
| 205 - 214 |
Prediction of high-temperature rapid combustion behaviour of woody biomass particles
Li J, Paul MC, Younger PL, Watson I, Hossain M, Welch S |
| 215 - 223 |
MgO-Li2O catalysts templated by a PDMS-PEO comb-like copolymer for transesterification of vegetable oil to biodiesel
Lu HT, Yu XH, Yang S, Yang HG, Tu ST |
| 224 - 234 |
Understanding of physicochemical properties and formation mechanisms of fine particular matter generated from Canadian coal combustion
Tian C, Lu QY, Liu YX, Zeng HB, Zhao YC, Zhang JY, Gupta R |
| 235 - 243 |
Evaluation of CaO-decorated Fe2O3/Al2O3 as an oxygen carrier for in-situ gasification chemical looping combustion of plastic wastes
Wang JX, Zhao HB |
| 244 - 251 |
Biodiesel density and derived thermodynamic properties at high pressures and moderate temperatures
Ivanis GR, Radovic IR, Veljkovic VB, Kijevcanin ML |
| 252 - 259 |
Effects of moisture release and radiation properties in pulverized fuel combustion: A CFD modelling study
Yin CE |
| 260 - 263 |
Interaction between sodium vapor and reactor wall during biomass combustion and its influence on measurement of particulate matter emission
Gao XP, Chen Y, Sheng CD, Wu HW |
| 264 - 271 |
Removal of sulfonated humic acid from aqueous phase by modified coal fly ash waste: Equilibrium and kinetic adsorption studies
An CJ, Yang SQ, Huang GH, Zhao S, Zhang P, Yao Y |
| 272 - 278 |
Effects of sorbents on the heavy metals control during tire rubber and polyethylene combustion in CO2/O-2 and N-2/O-2 atmospheres
Tang YT, Ma XQ, Zhang C, Yu QH, Fan YX |
| 279 - 288 |
A study of the explosion parameters of vapor-liquid two-phase JP-10/air mixtures
Liu XL, Wang Y, Zhang Q |
| 289 - 297 |
Effect of impregnation solvent on Ni dispersion and catalytic properties of Ni/SBA-15 for CO methanation reaction
Tao M, Meng X, Lv YH, Bian ZC, Xin Z |
| 298 - 305 |
Solvent free synthesis of methyl palmitate over sulfated zirconia solid acid catalyst
Saravanan K, Tyagi B, Shukla RS, Bajaj HC |
| 306 - 315 |
Comparing hydrocracking models: Continuous lumping vs. single events
Becker PJ, Serrand N, Celse B, Guillaume D, Dulot H |
| 316 - 323 |
Removal of fine particles from coal combustion in the combined effect of acoustic agglomeration and seed droplets with wetting agent
Yan JP, Chen LQ, Li Z |
| 324 - 330 |
Reductive pyrolysis of Miocene-aged lignite humic acids, Bulgaria
Stefanova M, Gonsalvesh L, Marinov S, Czech J, Carleer R, Yperman J |
| 331 - 340 |
Combustion characteristics of wet ethanol ignited using a focused Q-switched Nd:YAG nanosecond laser
Rahman KM, Kawahara N, Tsuboi K, Tomita E |
| 341 - 350 |
Exploring the benefits of multiple injections in low temperature combustion using a diesel surrogate model
Anand K, Reitz RD |
| 351 - 359 |
Characterization of rice husk ash produced using different biomass combustion techniques for energy
Fernandes IJ, Calheiro D, Kieling AG, Moraes CAM, Rocha TLAC, Brehm FA, Modolo RCE |
| 360 - 366 |
Synthesis of ethyl esters from crude macauba oil (Acrocomia aculeata) for biodiesel production
Souza GK, Scheufele FB, Pasa TLB, Arroyo PA, Pereira NC |
| 367 - 378 |
Ferrites as redox catalysts for chemical looping processes
Evdou A, Zaspalis V, Nalbandian L |
| 379 - 388 |
Quantification of conventional and advanced biofuels contents in diesel fuel blends using near-infrared spectroscopy and multivariate calibration
Alves JCL, Poppi RJ |
| 389 - 396 |
A'smart' fuel of photochemically-controlled reactivity
Schonborn A |
| 397 - 404 |
Experimental and kinetic study of catalytic steam gasification of low rank coal with an environmentally friendly, inexpensive composite K2CO3-eggshell derived CaO catalyst
Fan S, Yuan X, Zhao L, Xu LH, Kang TJ, Kim HT |
| 405 - 412 |
Quantum-chemical analysis of the processes at the surfaces of Diesel fuel droplets
Sazhin SS, Gun'ko VM, Nasiri R |
| 413 - 424 |
Assessment of particulate matter in exhaust gas for biodiesel and diesel under conventional and low temperature combustion in a compression ignition engine
Jung Y, Hwang J, Bae C |
| 425 - 431 |
Organo-refining of high-ash Indian coals at bench scale
Chandaliya VK, Biswas PP, Dash PS |
| 432 - 439 |
Influence of partial substitution of iron oxide by titanium oxide on the structure and activity of iron-cerium mixed oxide catalyst for selective catalytic reduction of NOx with NH3
Xiong ZB, Hu Q, Liu DY, Wu C, Zhou F, Wang YZ, Jin J, Lu CM |
| 440 - 446 |
Self-hardening of fly ashes from a bubbling fluidized bed combustion of peat, forest industry residuals, and wastes
Ohenoja K, Tanskanen P, Wigren V, Kinnunen P, Korkko M, Peltosaari O, Osterbacka J, Illikainen M |
| 447 - 461 |
Experimental study of the inverse diffusion flame using high repetition rate OH/acetone PLIF and PIV
Elbaz AM, Roberts WL |
| 462 - 467 |
ZrO2-impregnated red mud as a novel catalyst for steam catalytic cracking of vacuum residue
Lee HS, Nguyen-Huy C, Pham TT, Shin EW |
| 468 - 476 |
Graphene based catalysts for deep hydrodesulfurization of naphtha and diesel fuels: A physiochemical study
Hajjar Z, Kazemeini M, Rashidi A, Bazmi M |
| 477 - 483 |
Combustion of single char particles from Victorian brown coal under oxy-fuel fluidized bed conditions
Roy B, Bhattacharya S |
| 484 - 489 |
Effects of CO2 on sulfur removal and its release behavior during coal pyrolysis
Wang XL, Guo HQ, Liu FR, Hua RS, Wang MJ |
| 490 - 498 |
Processing of TGA data: Analysis of isoconversional and model fitting methods
Jain AA, Mehra A, Ranade VV |
| 499 - 512 |
Laboratory characterisation of coal matrix shrinkage, cleat compressibility and the geomechanical properties determining reservoir permeability
Connell LD, Mazumder S, Sander R, Camilleri M, Pan ZJ, Heryanto D |
| 513 - 525 |
Oxidation characteristics and products of five ethers at low temperature
Liu XM, Zhang Q, Ito S, Wada Y |
| 526 - 535 |
Co-processing potential of HTL bio-crude at petroleum refineries - Part 1: Fractional distillation and characterization
Hoffmann J, Jensen CU, Rosendahl LA |
| 536 - 543 |
Co-processing potential of HTL bio-crude at petroleum refineries. Part 2: A parametric hydrotreating study
Jensen CU, Hoffmann J, Rosendahl LA |
| 544 - 552 |
Impact of organically bonded potassium on torrefaction: Part 1. Experimental
Shoulaifar TK, DeMartini N, Karlstrom O, Hupa M |
| 553 - 553 |
Experimental investigation on the combustion and particulate matter (PM) emissions from a port-fuel injection (PFI) gasoline engine fueled with methanol-ultralow sulfur gasoline blends (vol 145, pg 221, 2015)
Geng P, Yao CD |
| 554 - 554 |
Combustion and emission characteristics of a direct-injection gasoline engine using the MMT fuel additive gasoline (vol 144, pg 380, 2015)
Geng P, Yao CD |
