| 1 - 9 |
Preparation of NiS2//MoS2 catalysts by two-step hydrothermal method and their enhanced activity for hydrodeoxygenation of p-cresol
Wang WY, Li L, Tan S, Wu K, Zhu GH, Liu Y, Xu Y, Yang YQ |
| 10 - 16 |
The internal and external factor on coal ash slag viscosity at high temperatures, Part 3: Effect of CaO on the pattern of viscosity-temperature curves of slag
Kong LX, Bai J, Li W, Wen XD, Li XM, Bai ZQ, Guo ZX, Li HZ |
| 17 - 24 |
Amelioration of catalytic activity in steam catalytic cracking of vacuum residue with ZrO2-impregnated macro-mesoporous red mud
Chinh NH, Shin EW |
| 25 - 35 |
Droplet dynamics of DI spray from sub-atmospheric to elevated ambient pressure
Li YF, Guo HJ, Ma X, Wang JX, Xu HM |
| 36 - 44 |
An experimental study on jatropha-derived alternative aviation fuel sprays from simplex swirl atomizer
Sivakumar D, Vankeswaram SK, Sakthikumar R, Raghunandan BN, Hu JTC, Sinha AK |
| 45 - 51 |
Hydrotreatment of fast pyrolysis oil: Effects of esterification pre-treatment of the oil using alcohol at a small loading
Reyhanitash E, Tymchyshyn M, Yuan ZS, Albion K, van Rossum G, Xu CB |
| 52 - 59 |
Experimental evaluation of additives and K2O-SiO2-Al2O3 diagrams on high-temperature silicate melt-induced slagging during biomass combustion
Niu YQ, Wang ZZ, Zhu YM, Zhang XL, Tan HZ, Hui SE |
| 60 - 70 |
Theoretical and experimental procedure for scaling-up RDF gasifiers: The Gibbs Gradient Method
Barba D, Capocelli M, Cornacchia G, Matera DA |
| 71 - 78 |
A new criterion for determination of coal ash sintering temperature using the pressure-drop technique and the effect of ash mineralogy and geochemistry
Li JB, Zhu MM, Zhang ZZ, Zhang DK |
| 79 - 86 |
Artificial intelligence modeling of DME conversion to gasoline and light olefins over modified nano ZSM-5 catalysts
Hajjar Z, Khodadadi A, Mortazavi Y, Tayyebi S, Soltanali S |
| 87 - 96 |
Effective thermal conductivity of methane hydrate-bearing sediments: Experiments and correlations
Yang L, Zhao JF, Wang B, Liu WG, Yang MJ, Song YC |
| 97 - 102 |
Correlations of viscous fingering in heavy oil waterflooding
Jamaloei BY, Babolmorad R, Kharrat R |
| 103 - 107 |
Diagnosis of bed agglomeration during biomass pyrolysis in fluidized-bed at a wide range of temperatures
Burton A, Wu HW |
| 108 - 113 |
Surface functional groups and sp(3)/sp(2) hybridization ratios of in -cylinder soot from a diesel engine fueled with n-heptane and n-heptane/toluene
Liu Y, Song CL, Lv G, Cao XF, Wang L, Qiao YH, Yang XL |
| 114 - 123 |
Changes in gas storage and transport properties of coal as a result of enhanced microbial methane generation
Pandey R, Harpalani S, Feng RM, Zhang J, Liang YN |
| 124 - 134 |
Catalytic pyrolysis-GC/MS of Spirulina: Evaluation of a highly proteinaceous biomass source for production of fuels and chemicals
Chagas BME, Dorado C, Serapiglia MJ, Mullen CA, Boateng AA, Melo MAF, Ataide CH |
| 135 - 140 |
Properties of direct coal liquefaction residue water slurry: Effect of treatment by low temperature pyrolysis
Lv DM, Bai ZQ, Wei YC, Bai J, Kong LX, Guo ZX, Li X, Xu J, Li W |
| 141 - 149 |
A comparison of the rheological behavior of hydrate forming emulsions stabilized using either solid particles or a surfactant
Raman AKY, Koteeswaran S, Venkataramani D, Clark P, Bhagwat S, Aichele CP |
| 150 - 155 |
An experimental ex-situ study of the suitability of a high moisture ortho-lignite for underground coal gasification (UCG) process
Kapusta K, Wiatowski M, Stanczyk K |
| 156 - 167 |
Pressure influence on pyrolysis product properties of raw and torrefied Miscanthus: Role of particle structure
Wafiq A, Reichel D, Hanafy M |
| 168 - 178 |
Modeling of the fuel injection and combustion process in a CNG direct injection engine
Choi M, Song J, Park S |
| 179 - 192 |
Interaction of bio-coke with different coal tar pitches
Huang XA, Kocaefe D, Kocaefe Y, Bhattacharyay D |
| 193 - 201 |
Effect of MoO3 on catalytic performance and stability of the SBA-16 supported Ni-catalyst for CO methanation
Bian ZC, Meng X, Tao M, Lv YH, Xin Z |
| 202 - 209 |
Membrane reactor system model for gas conversion to benzene
Corredor EC, Chitta P, Deo M |
| 210 - 220 |
On the evaluation of the performance of asphaltene dispersants
Melendez-Alvarez AA, Garcia-Bermudes M, Tavakkoli M, Doherty RH, Meng SQ, Abdallah DS, Vargas FM |
| 221 - 228 |
Experimental investigation and numerical simulation of CO oxidation with HCl addition
Wu DY, Wang YH, Wei XL, Li S, Guo XF |
| 229 - 234 |
Decolorization improves the fuel properties of algal biodiesel from Isochrysis sp.
O'Neil GW, Knothe G, Williams JR, Burlow NP, Reddy CM |
| 235 - 245 |
Impacts of nozzle geometry on spray combustion of high pressure common rail injectors in a constant volume combustion chamber
Yao CD, Geng PL, Yin ZH, Hu JT, Chen DL, Ju YS |
| 246 - 257 |
Development of a soot particle model with PAHs as precursors through simulations and experiments
An YZ, Li X, Teng SP, Wang K, Pei YQ, Qin J, Zhao H |
| 258 - 266 |
Application of UV-Visible Light Absorption and Scattering technique to low absorption fuels under diesel-like conditions
Pastor JV, Garcia-Oliver JM, Lopez JJ, Mico C |
| 267 - 273 |
Enhanced biomethane production from Miscanthus lutarioriparius using steam explosion pretreatment
Li C, Liu GJ, Nges IA, Liu J |
| 274 - 280 |
Facile, low-cost, and sustainable preparation of hierarchical porous carbons from ion exchange resin: An improved potassium activation strategy
Wang BD, Zhu CM, Zhang ZZ, Zhang WL, Chen XQ, Sun NN, Wei W, Sun YH, Ji HF |
| 281 - 288 |
A comparative study of C-4 and C-5 alcohol treated diesel-biodiesel blends in terms of diesel engine performance and exhaust emission
Imdadul HK, Masjuki HH, Kalam MA, Zulkifli NWM, Alabdulkarem A, Kamruzzaman M, Rashed MM |
| 289 - 298 |
A novel approach for modeling and optimization of surfactant/polymer flooding based on Genetic Programming evolutionary algorithm
Bahrami P, Kazemi P, Mahdavi S, Ghobadi H |
| 299 - 304 |
Graphite oxide-incorporated CeP2O7/BPO4 solid composite electrolyte for high-temperature proton exchange membrane fuel cells
Huang X, Deng YM, Xu CX, Hu Y, Yang L, Luo PF, Lu YW, Cheng JG |
| 305 - 311 |
The enhanced performance of ceria by HF treatment for selective catalytic reduction of NO with NH3
Yang NZ, Guo RT, Tian Y, Pan WG, Chen QL, Wang QS, Lu CZ, Wang SX |
| 312 - 321 |
Efficient upgrading process for production of low quality fuel from bio-oil
Zhang XH, Zhang Q, Wang TJ, Li BS, Xu Y, Ma LL |
| 322 - 331 |
Modeling NOx emission of coke combustion in iron ore sintering process and its experimental validation
Zhou H, Zhou MX, Liu ZH, Cheng M, Chen JZ |
| 332 - 338 |
Renewable production of value-added jojobyl alcohols and biodiesel using a naturally-derived heterogeneous green catalyst
Avhad MR, Sanchez M, Pena E, Bouaid A, Martinez M, Aracil J, Marchetti JM |
| 339 - 352 |
N-heptane micro pilot assisted methane combustion in a Rapid Compression Expansion Machine
Schlatter S, Schneider B, Wright YM, Boulouchos K |
| 353 - 361 |
Characterization and performance evaluation of Ni-based catalysts with Ce promoter for methane and hydrocarbons steam reforming process
Yang X, Da JW, Yu HT, Wang H |
| 362 - 367 |
Hysteresis in stabilization of methane diffusion flames with plasmas
Tang JF, Wei LQ, Song J, Yu DR |
| 368 - 375 |
Thermal degradation of polyethylene waste and jute fiber in oxidative environment and recovery of oil containing phytol and free fatty acids
Dixit S, Dixit G, Verma V |
| 376 - 390 |
Low temperature air injection with solvents in heavy-oil containing naturally fractured reservoirs: Effects of matrix/fracture properties and temperature on recovery
Mayorquin-Ruiz J, Babadagli T |
| 391 - 405 |
Potential of internal EGR and throttled operation for low load extension of ethanol-diesel dual-fuel reactivity controlled compression ignition combustion on a heavy-duty engine
Pedrozo VB, May I, Lanzanova TDM, Zhao H |
