| 1 - 7 |
The effect of azeotropic blended fuel on combustion characteristics in a ceiling vented compartment
Ding YM, Lin F, Lu SX, He Q, Wang CJ, Zhou R |
| 8 - 14 |
Flame-wall interactions of lean premixed flames under elevated, rising pressure conditions
Yenerdag B, Minamoto Y, Aoki K, Shimura M, Nada Y, Tanahashi M |
| 15 - 22 |
Influence of coal blending on ash fusion property and viscosity
Wang DC, Liang QF, Gong X, Liu HF, Liu X |
| 23 - 31 |
Coke formation on the surface of Ni/HZSM-5 and Ni-Cu/HZSM-5 catalysts during bio-oil hydrodeoxygenation
Li Y, Zhang CS, Liu YG, Tang SS, Chen GH, Zhang RQ, Tang XQ |
| 32 - 38 |
The retention mechanism, transformation behavior and environmental implication of trace element during co-combustion coal gangue with soybean stalk
Zhou CC, Liu GJ, Xu ZY, Sun H, Lam PKS |
| 39 - 45 |
Influence of silica and alumina (SiO2 + Al2O3) on crystallization characteristics of synthetic coal slags
Xuan WW, Wang Q, Zhang JS, Xia DH |
| 46 - 56 |
Selective enrichment of chemical structure during first grinding of Zhundong coal and its effect on pyrolysis reactivity
Zhao Y, Qiu PH, Chen G, Pei JT, Sun SZ, Liu L, Liu HP |
| 57 - 65 |
Catalytic steam gasification of lignite for hydrogen-rich gas production in a decoupled triple bed reaction system
Xiao YH, Xu SP, Tursun Y, Wang C, Wang GY |
| 66 - 78 |
Experimental observations on the influence of hydrogen atoms diffusion on laminar and turbulent premixed burning velocities
Burluka AA, Gaughan RG, Griffiths JF, Mandilas C, Sheppard CGW, Woolley R |
| 79 - 87 |
Recyclable magnetic graphene oxide for rapid and efficient demulsification of crude oil-in-water emulsion
Liu J, Wang HJ, Li XC, Jia WH, Zhao YP, Ren SL |
| 88 - 97 |
Multi-scale characterisation of chars mineral species for tar cracking
Hervy M, Berhanu S, Weiss-Hortala E, Chesnaud A, Gerente C, Villot A, Minh DP, Thorel A, Le Coq L, Nzihou A |
| 98 - 106 |
Nitrogen and sulfur conversion during pressurized pyrolysis under CO2 atmosphere in fluidized bed
Duan YQ, Duan LB, Anthony EJ, Zhao CS |
| 107 - 119 |
Design of a valuable fuel couple and engine compression ratio for an Octane-On-Demand SI engine concept: A simulation approach using experimental data
Bedon M, Milosavljevic M, Morel V, Solari JP, Bourhis G, Dauphin R |
| 120 - 130 |
The contribution of differently-sized ash particles to the fouling trends of a pilot-scale coal-fired combustor with an ash deposition CFD model
Perez MG, Vakkilainen E, Hyppanen T |
| 131 - 140 |
Characterizing particulate matter emissions from GDI and PFI vehicles under transient and cold start conditions
Chen LF, Liang ZR, Zhang X, Shuai SJ |
| 141 - 154 |
A study on combustion and emission of GCI engines fueled with gasoline-biodiesel blends
Putrasari Y, Lim O |
| 155 - 163 |
Nanostructure characterization of asphalt-aggregate interface through molecular dynamics simulation and atomic force microscopy
Dong ZJ, Liu ZY, Wang P, Gong XB |
| 164 - 177 |
Gas sorption-induced coal swelling kinetics and its effects on coal permeability evolution: Model development and analysis
Zang J, Wang K |
| 178 - 185 |
Molecular structure characterization of the tetrahydrofuran-microwave-extracted portions from three Chinese low-rank coals
Zhang LP, Hu S, Chen QD, Xiao LF, Syed-Hassan SSA, Jiang L, Wang Y, Su S, Xiang J |
| 186 - 194 |
Adsorptive desulfurization of diesel oil using nickel nanoparticle-doped activated carbon beads with/without carbon nanofibers: Effects of adsorbate size and adsorbent texture
Prajapati YN, Verma N |
| 195 - 202 |
Distribution of hydroxyl group in coal structure: A theoretical investigation
Li L, Fan HJ, Hu HQ |
| 203 - 209 |
Isobutane alkylation with 2-butene catalyzed by amide-AlCl3-based ionic liquid analogues
Hu PC, Wang YD, Meng XH, Zhang R, Liu HY, Xu CM, Liu ZC |
| 210 - 237 |
Experimental and numerical investigation of low-pressure laminar premixed synthetic natural gas flames in rich conditions
Lefort B, El Bakali A, Gasnot L, Pauwels JF |
| 238 - 259 |
Modulation of integral length scales of turbulence in an optical SI engine by direct injection of gasoline, iso-octane, ethanol and butanol fuels
Aleiferis PG, Behringer MK |
| 260 - 269 |
Simultaneous capture of liquid length of spray and flame lift-off length for second-generation biodiesel/diesel blended fuel in a constant volume combustion chamber
Li D, He ZX, Xuan TM, Zhong WJ, Cao JW, Wang Q, Wang P |
| 270 - 283 |
Impact of coal matrix strains on the evolution of permeability
Peng Y, Liu JS, Pan ZJ, Connell LD, Chen ZW, Qu HY |
| 284 - 292 |
Performance of lignin derived compounds as octane boosters
Tian M, McCormick RL, Ratcliff MA, Luecke J, Yanowitz J, Glaude PA, Cuijpers M, Boot MD |
| 293 - 300 |
Internal crack growth of asphalt binders during shear fatigue process
Shan LY, Tian S, He HS, Ren NQ |
| 301 - 311 |
Effect of temperature on gasification performance and sodium transformation of Zhundong coal
Zhang HX, Guo XW, Zhu ZP |
| 312 - 321 |
Impact of calcium on the synergistic effect for the reactivity of coal char gasification in H2O/CO2 mixtures
Gao MQ, Yang ZR, Wang YL, Bai YH, Li F, Xie KC |
| 322 - 333 |
Rheological demonstration of alteration in the heavy crude oil fluid structure upon addition of nanoparticles
Taborda EA, Alvarado V, Franco CA, Cortes FB |
| 334 - 339 |
Design rules of ionic liquids tasked for highly efficient fuel desulfurization by mild oxidative extraction
Zhao H, Baker GA, Zhang Q |
| 340 - 349 |
Microbial community composition in Brazilian stored diesel fuel of varying sulfur content, using high-throughput sequencing
de Azambuja AO, Bucker F, de Quadros PD, Zhalnina K, Dias R, Vacaro BB, Correa C, Ferrao MF, Camargo FAD, Triplett E, Bento FM |
| 350 - 357 |
Experimental and modeling study on ignition delay times of dimethoxy methane/n-heptane blends
Hu EJ, Gao ZH, Liu Y, Yin GY, Huang ZH |
| 358 - 368 |
Parametric study on the particulate matter emissions during solid fuel combustion in a drop tube furnace
Zellagui S, Trouve G, Schonnenbeck C, Zouaoui-Mahzoul N, Brilhac JF |
| 369 - 376 |
The comparative and combined effects of hydrogen addition on the laminar burning velocities of methane and its blends with ethane and propane
Nilsson EJK, van Sprang A, Larfeldt J, Konnov AA |
| 377 - 390 |
Influence of diethyl ether (DEE) addition in ethanol-biodiesel-diesel (EBD) and methanol-biodiesel-diesel (MBD) blends in a diesel engine
Venu H, Madhavan V |
| 391 - 399 |
An experimental investigation of applicability of CO2 enhanced coal bed methane recovery to low rank coal
Ranathunga AS, Perera MSA, Ranjith PG, Wei CH |
| 400 - 407 |
Phenylpropanoic acid-based DESs as efficient extractants and catalysts for the removal of sulfur compounds from oil
Mao CF, Zhao RX, Li XP |
| 408 - 418 |
A new insight into the structure of Huolinhe lignite based on the yields of benzene carboxylic acids
Yang F, Hou YC, Wu WZ, Niu MG, Ren SH, Wang Q |
| 419 - 427 |
Methanation of syngas (H-2/CO) over the different Ni-based catalysts
Cheng CB, Shen DK, Xiao R, Wu CF |
| 428 - 435 |
Effect of oxygen addition in steam gasification of chicken manure
Hussein MS, Burra KG, Amano RS, Gupta AK |
| 436 - 439 |
A sustainable method to produce biodiesel through an emulsion formation induced by a high shear mixer
Sanchez-Cantu M, Perez-Diaz LM, Morales-Tellez M, Martinez-Santamaria I, Hilario-Martinez JC, Sandoval-Ramirez J |
| 440 - 442 |
Proton exchange in gasoline-ethanol fuel blends
Turanov A, Khitrin AK |
| 445 - 445 |
Abandoned coal mine geothermal for future wide scale heat networks
Thomas DJ |
