| 1 - 7 |
Contribution of sulfur compounds to deposit formation in jet fuels at 140 degrees C using a quartz crystal microbalance technique
Rawson PM, Webster RL, Evans D, Abanteriba S |
| 8 - 17 |
Applicability of a kinetic model for catalytic conversion of tar and light hydrocarbons using process-activated ilmenite
Nguyen HNT, Berguerand N, Thunman H |
| 18 - 25 |
Characteristics of tar abatement by thermal cracking and char catalytic reforming in a fluidized bed two-stage reactor
Zeng X, Wang F, Sun YL, Zhang JL, Tang SB, Xu GW |
| 26 - 36 |
Effects of charge concentration and reactivity stratification on combustion and emission characteristics of a PFI-DI dual injection engine under low load condition
Liu HF, Ma GX, Ma NF, Zheng ZQ, Huang HZ, Yao MF |
| 37 - 44 |
Measurement of laminar burning velocity of ethanol-air mixtures at elevated temperatures
Katoch A, Millan-Merino A, Kumar S |
| 45 - 52 |
Benzene and toluene removal from synthetic automotive gasoline by mono and bicomponent adsorption process
Stahelin PM, Valerio A, de Souza SMDGU, da Silva A, Valle JAB, de Souza AAU |
| 53 - 60 |
Origin of unresolved complex mixtures (UCMs) in biodegraded oils: Insights from artificial biodegradation experiments
Hu SZ, Li SF, Wang JH, Cao J |
| 61 - 72 |
Experimental investigation of the flue gas thermochemical composition of an oxy-fuel swirl burner
Burkle S, Becker LG, Dreizler A, Wagner S |
| 73 - 84 |
Chemical looping combustion of biomass in 10-and 100-kW pilots - Analysis of conversion and lifetime using a sintered manganese ore
Schmitz M, Linderholm C |
| 85 - 93 |
Numerical investigation on methanation kinetic and flow behavior in full-loop fluidized bed reactor
Sun LY, Luo K, Fan JR |
| 94 - 100 |
Thermal stability, chemical speciation and leaching characteristics of hazardous trace elements in FGD gypsum from coal-fired power plants
Zhao SL, Duan YF, Lu JC, Gupta R, Pudasainee D, Liu S, Liu M, Lu JH |
| 101 - 109 |
Ethanol production from acid-pretreated and detoxified tea processing waste and its modeling
Germec M, Turhan I |
| 110 - 117 |
Co-pyrolysis of wood and plastics: Influence of plastic type and content on product yield, gas composition and quality
Ephraim A, Minh DP, Lebonnois D, Peregrina C, Sharrock P, Nzihou A |
| 118 - 125 |
Nine-lumped kinetic model for VGO catalytic cracking; using catalyst deactivation
Ebrahimi AA, Mousavi H, Bayesteh H, Towfighi J |
| 126 - 133 |
Molecular characterization of naphthenic acids from heavy crude oils using MALDI FT-ICR mass spectrometry
Valencia-Davila JA, Witt M, Blanco-Tirado C, Combariza MY |
| 134 - 144 |
Transformation of sulfur and nitrogen during Shenmu coal pyrolysis
Hou JL, Ma Y, Li SY, Shi J, He L, Li J |
| 145 - 145 |
Mild oxidation of Yanshan petroleum coke with aqueous sodium hypochlorite (vol 226, pg 658, 2018)
Lv JH, Wei XY, Zhang YY, Zong ZM |
| 146 - 156 |
Reliable modeling of constant volume depletion (CVD) behaviors in gas condensate reservoirs
Najafi-Marghmaleki A, Tatar A, Barati-Harooni A, Arabloo M, Rafiee-Taghanaki S, Mohammadi AH |
| 157 - 164 |
Influence of sucrose addition and acid treatment of silica-supported Co-Ru catalysts for Fischer-Tropsch synthesis
Ribeiro ATS, Bezerra VVL, Bartolomeu RAC, Abreu CAM, Filho NML, Silva AOS, Maranhao LCA, Merino D, Sanz O, Montes M, Machado G, Almeida LC |
| 165 - 171 |
Transfer-hydrogenation of furfural and levulinic acid over supported copper catalyst
Gong WB, Chen C, Fan RY, Zhang HM, Wang GZ, Zhao HJ |
| 172 - 186 |
Analytical development of a model for counter-flow non-premixed flames with volatile biofuel particles considering drying and vaporization zones with finite thicknesses
Bidabadi M, Panahifar P, Sadeghi S |
| 187 - 196 |
Viscosity measurements of (CH4 + C3H8 + CO2) mixtures at temperatures between (203 and 420) K and pressures between (3 and 31) MPa
Al Ghafri SZS, Czubinski FF, May EF |
| 197 - 203 |
Impact of changing combustion chamber geometry on emissions, and combustion characteristics of a single cylinder SI (spark ignition) engine fueled with ethanol/gasoline blends
Hasan AO, Al-Rawashdeh H, Al-Muhtaseb AH, Abu-jrai A, Ahmad R, Zeaiter J |
| 204 - 214 |
Effects of diluent on laminar burning speed and flame structure of gas to liquid fuel air mixtures at high temperatures and moderate pressures
Wang ZY, Bai ZW, Yelishala SC, Yu GY, Metghalchi H |
| 215 - 223 |
Laminar burning velocity of 2-methylfuran-air mixtures at elevated pressures and temperatures: Experimental and modeling studies
Xu CS, Zhong AH, Wang HY, Jiang CZ, Sahu A, Zhou WH, Wang CM |
| 224 - 233 |
Enhancement of isobutane/butene alkylation by aromatic-compound additives in strong Bronsted acid
Zhang HH, Tang HG, Xu JK, Li YJ, Yang ZQ, Liu RX, Zhang SJ, Wang YJ |
| 234 - 243 |
Prediction of hot coke oven gas reforming by LES coupled with the extended flamelet/progress variable approach
Yu PL, Norinaga K, Watanabe H, Kitagawa T |
| 244 - 252 |
Droplet evaporation modeling of electrified fatty acid methyl esters
Ahmed T, Kourmatzis A, Pham PX, Masri AR |
| 253 - 263 |
Deactivation and regeneration studies of activated carbon during continuous decarboxylation of oleic acid in subcritical water
Hossain MZ, Jhawar AK, Chowdhury MBI, Xu WZ, Charpentier PA |
| 264 - 270 |
Analysis of biodiesel-diesel blends using ultrafast gas chromatography (UFGC) and chemometric methods: Extending ASTM D7798 to biodiesel
Hupp AM, Perron J, Roques N, Crandall J, Ramos S, Rohrback B |
| 271 - 280 |
Total Acid Number (TAN) reduction of high acidic crude oil by catalytic esterification of naphthenic acids in fixed-bed continuous flow reactor
Rana BS, Cho DW, Cho K, Kim JN |
| 281 - 289 |
Effect of bed characteristics on separation behavior of coal particles in a gassolid fluidized bed
Luo ZF, Wang YA, Zhao YM, Zhou EH, Lv B |
| 290 - 296 |
Development of MgMnO3-delta as an oxygen carrier material for chemical looping combustion
Hwang JH, Baek JI, Ryu HJ, Sohn JM, Lee KT |
| 297 - 306 |
Separation of asphaltene-stabilized water in oil emulsions and immiscible oil/water mixtures using a hydrophobic cellulosic membrane
Medina-Sandoval CF, Valencia-Davila JA, Combariza MY, Blanco-Tirado C |
| 307 - 316 |
The correlation between dynamic phenomena of boreholes for outburst prediction and outburst risks during coal roadways driving
Wang CJ, Yang SQ, Li XW, Yang DD, Jiang CL |
| 317 - 327 |
Potential of water direct injection in a CAI/HCCI gasoline engine to extend the operating range towards higher loads
Valero-Marco J, Lehrheuer B, Lopez JJ, Pischinger S |
| 328 - 340 |
Biogas combustion: Chemiluminescence fingerprint
Quintino FM, Trindade TP, Fernandes EC |
| 341 - 341 |
Determination of the absolute adsorption/desorption isotherms of CH4 and n-C4H10 on shale from a nano-scale perspective (vol 218, pg 67, 2018)
Liu YL, Li HA, Tian YY, Jin ZH, Deng HC |
| 342 - 351 |
A new analytical model for estimation of the molecular diffusion coefficient of gaseous solvents in bitumen - Effect of swelling
Sabet N, Khalifi M, Zirrahi M, Hassanzadeh H, Abedi J |
| 352 - 360 |
Three stages of methane adsorption capacity affected by moisture content
Fan KK, Li YJ, Elsworth D, Dong MZ, Yin CB, Li YC, Chen ZL |
| 361 - 372 |
Development of an optimization methodology for formulating both jet fuel and diesel fuel surrogates and their associated skeletal oxidation mechanisms
Yu WB, Zhao FY, Yang WM, Tay KL, Xu HP |
| 373 - 378 |
Solutions for a turbulent jet diffusion flame of ethanol with NOx formation using a reduced kinetic mechanism obtained by applying ANNs
Pereira FN, De Bortoli AL |
| 379 - 386 |
Comprehensive coal quality index for evaluation of coal agglomeration characteristics
Guo L, Zhai M, Wang ZT, Zhang Y, Dong P |
| 387 - 395 |
Gas generation and its isotope composition during coal pyrolysis: Potential mechanism of isotope rollover
Ni YY, Gao JL, Chen JP, Liao FR, Liu JQ, Zhang DJ |
| 396 - 403 |
Multi-zone thermodynamic modeling of combustion and emission formation in CNG engines using detailed chemical kinetics
Baratta M, Ferrari A, Zhang Q |
| 404 - 416 |
Soot production modeling in a laminar coflow ethylene diffusion flame at different Oxygen Indices using a PAH-based sectional model
Jerez A, Consalvi JL, Fuentes A, Liu FS, Demarco R |
| 417 - 426 |
Effect of biomass ash addition on coal ash fusion process under CO2 atmosphere
Qin YH, Feng MM, Zhao ZB, Vassilev SV, Feng J, Vassileva CG, Li WY |
| 427 - 437 |
Experimental investigation on spontaneous imbibition of water in coal: Implications for methane desorption and diffusion
Wu JH, Yu JC, Wang ZF, Fu XH, Su WW |
| 438 - 448 |
Experimental investigation on spray, evaporation and combustion characteristics of ethanol-diesel, water-emulsified diesel and neat diesel fuels
Wang ZW, Wu S, Huang YH, Huang S, Shi SG, Cheng XB, Huang RH |
| 449 - 457 |
Effects of hydrophilic groups of nonionic surfactants on the wettability of lignite surface: Molecular dynamics simulation and experimental study
Guo JY, Zhang L, Liu SY, Li B |
| 458 - 467 |
Transesterification of castor oil using benzimidazolium based Bronsted acid ionic liquid catalyst
Khiratkar AG, Balinge KR, Patle DS, Krishnamurthy M, Cheralathan KK, Bhagat PR |
| 468 - 478 |
Modelling oxy-pyrolysis of sewage sludge in a rotary kiln reactor
Montagnaro F, Tregambi C, Salatino P, Senneca O, Solimene R |
| 479 - 488 |
Micro-particle gel transport performance through unconsolidated sandstone and its blocking to water flow during conformance control treatments
Imqam A, Bai BJ, Delshad M |
| 489 - 494 |
In-situ removal of sulfur from high sulfur solid waste during molten salt pyrolysis
Tang H, Xu M, Hu HY, Yang F, Yang YH, Liu H, Li X, Yao H |
| 495 - 506 |
Study on effect of cross-linked structures induced by oxidative treatment of aromatic hydrocarbon oil on subsequent carbonized behaviors
Liu D, Lou B, Chang GK, Zhang YD, Yu R, Li ZH, Wu CC, Li M, Chen QT |
| 507 - 514 |
CO2-cyclic solvent injection (CO2-CSI) and gas/waterflooding in the thin post-CHOPS reservoirs
Ma HZ, Gu YA |
