This study was conducted to determine the impacts of heat treatment on lap shear strength, density, and mass loss of black pine wood. In the study, black pine wood boards bonded with polyurethane were subjected to temperatures of 160, 180, and 200 degrees C for durations of 2 and 6 hours. Specimens having two layers were prepared from untreated and treated wood for mechanical testing of bond lines. Data were analyzed using variance analysis and Tukey's test to determine the impacts of changes in density and mass of heat-treated black pine wood on lap shear strength. The results indicated that the lap shear strength of black pine wood decreased as the intensity of heat treatment increased. The results also indicated that the minimum and maximum percentage decreases of lap shear strength were approximately 27% for 160 degrees C and 2 hours and 78% for 200 degrees C and 6 hours.