Surface modification by corona discharge plasma is one of the most interesting industrial applications for surface modification compared with other techniques which require vacuum conditions. In this work, we have used the corona discharge plasma technique to modify the wettability properties of low density polyethylene ( LDPE) film. The effects of this treatment on the surface of LDPE film have been quantified by contact angle measurements, Fourier-transform Infrared Spectroscopy, X-ray photoelectron spectroscopy and atomic force microscopy. With these methods, we have determined how the treatment modifies, activates and functionalizes the surface of LDPE film, increasing its hydrophilic behavior, and how the process parameters influence the uniformity and homogeneity of the treated surface. The results obtained show good treatment homogeneity and an improvement of adhesion properties by the functionalization and etching of the film surface.