Certain Athabasca reservoirs have low pressures because they have been depleted due to production of overlying gas. Other reservoirs are naturally occurring low pressure shallow bitumen reservoirs. Hence, there is a need to develop or investigate recovery processes under which such low pressure reservoirs can be developed. As a result of this, experiments were initiated to extend the Expanding Solvent-SAGD (ES-SAGD) process application to low pressure Athabasca reservoirs in order to evaluate oil recovery from such reservoirs. The goal of these experiments is to develop a low pressure ES-SAGD process with better performance than, or comparable performance to, that of the high pressure SAGD process. This paper describes five sets of laboratory experiments examining recovery processes, which includes a low pressure (500 kPag +/- 50 kPag) SAGD experiment, a propane-SAGID experiment, multi-component ES-SAGD (at low and high concentrations) experiments and a high pressure (2, 100 kPag +/- 50 kPag) SAGD experiment. The results of these experiments are presented and analyzed in order to evaluate the performance of low pressure ES-SAGD in comparison to SAGD (at low and high pressure) and propane-SAGD at low pressure. The processes were assessed for recovery, recovery time, heat loss, steam chamber growth and energy efficiency. The principal conclusion is that the low pressure multi-component ES-SAGD at the right concentration (mostly at low concentration) is fairly competitive with SAGD at a high pressure. The energy consumption in the steam or steam/solvent zone per oil recovered (ECDZ) for low pressure multi-component ES-SAGD experiments is much lower than the low pressure and high pressure SAGD tests. The propane-SAGD test recovery is very low, even at higher energy consumption, than that of the ES-SAGD experiment at low concentration. The work presented in this paper shows that the application of a multi-component ES-SAGD process in the field at low pressure is a practical option. It also shows that bitumen/heavy oil reservoirs that would have remained untapped due to low reservoir pressure could be produced at lower energy consumption per oil recovered if a low pressure ES-SAGD process at low concentration of the diluents is employed in the recovery of the oil.