A tight gas reservoir is commonly defined as a reservoir having less than 0.1 milliDarcies permeability. Because of the very low permeability, hydraulic fracturing is usually carried out in efforts to establish commercial production. There are several basic concepts and field cases of different well tests in tight gas reservoirs in the literature. In this paper, we gather information and provide a guide to some of the most important tests. Generally because of low permeability, a well will not flow initially at measurable rates and conventional well testing cannot be applied. We review procedures for design of pre- and post-fracture tests in single and dual porosity reservoirs. The pre-fracture test permits estimating preliminary values of reservoir permeability and initial pressure. The post-fracture test provides data for estimating fracture half length and conductivity. We also review the application of convolution/deconvolution methods to analyze well tests with significant wellbore storage. Because of economic and environmental reasons, short duration procedures are preferred. However, although effective in many instances, these methods also have their own limitations.