화학공학소재연구정보센터
Journal of Applied Electrochemistry, Vol.26, No.2, 175-185, 1996
A Model for the Kolbe Reaction of Acetate in a Parallel-Plate Reactor
A mathematical model is developed for the study of the Kolbe oxidative dimerization of acetate to ethane and carbon dioxide in a parallel-plate reactor operating at a fixed cell potential, with hydrogen evolution being the cathode reaction. The volume of gas evolved into the interelectrode gap is tracked by constructing a hypothetical gas layer which increases in thickness with the streamwise direction in a manner determined by solution to the model equations; concurrently, the liquid flows in a hypothetical layer which decreases in thickness. The three-component gas phase is assumed to be ideal, and the liquid phase is an aqueous mixture of five species : acetate, proton, sodium and hydroxyl ions and acetic acid. The model predicts the concentration profiles and the streamwise variation of the gas-void fraction, reaction current density and liquid and gas velocities. Gas evolution causes a decreasing current density in the streamwise direction and an increasing gas and liquid velocity. The concentrations of acetic acid and proton decrease in the streamwise direction, while hydroxyl concentration increases; the decrease in acetate concentration, however, is not significant until the local base-to-acid ratio is near unity because of the buffering effect from undissociated acetic acid. The average current density increases with inlet solution velocity and cell potential and asymptotically approaches the secondary current limit. There exists an optimal interelectrode separation where the cell resistance is minimum. The average current density exhibits a shallow maximum with the base-to-acid ratio of the feed, but decreases precipitously when the ratio is near unity due to the rapid decrease in the proton concentration.