Solar power towers can be used to make hydrogen on a large scale. Electrolyzers could be used to convert solar electricity produced by the power tower to hydrogen, but this process is relatively, inefficient. Rather efficiency can be much improved if solar heat is directly converted to hydrogen via a thermochemical process. In the research summarized here, the marriage of a high-temperature (similar to 1000 degrees C) power tower with a sulfuric acid/ hybrid thermochemical cycle was studied. The concept combines a solar power tower, a solid-particle receiver a particle thermal energy storage system, and a hybrid-sulfuric-acid cycle. The cycle is "hybrid" because it produces hvdrogen with a combination of thermal input and an electrolyzer This solar thermochemical plant is predicted to produce hydrogen at a much lower cost than a solar-electrolyzer plant of similar size. To date, only small lab-scale tests have been conducted to demonstrate the feasibility of a few of the subsystems and a key immediate issue is demonstration of flow stability within the solid-particle receiver The paper describes the systems analysis that led to the favorable economic conclusions and discusses the,future development path.