Different parameters of casting solutions and casting conditions were studied for the development of cellulose acetate benzoate flat osmotic membranes. Casting solutions were prepared with different concentrations of the polymer, the additive, and the solvent; viscosity of the casting solution; and the thickness of the membrane developed. The membranes were given different evaporation periods and annealing temperatures under different RH. Different annealing baths were also used. Based on these, conditions were optimized for the development of cellulose acetate benzoate flat osmotic membranes. These membranes were characterized with respect to bound water content, specific water content, transport properties by direct osmosis, salt intake by direct immersion, water permeability coefficient of the dense membrane, diffusion coefficient, salt permeability, and salt distribution by electrical conductivity. Also, cellulose acetate benzoate membranes were compared with conventionally used cellulose acetate membranes.