Porous Al2O3/ZrO2 ceramics with porosity varying from 6% to 50% were fabricated by gelcasting using polystyrene (PS) as pore-forming agent. The effects of sintering temperature on porosity, strength as well as pore size were investigated. The flexural strength of these porous ceramics at room temperature significantly decreases as the porosity increases. Thermal shock resistance of these ceramics was improved by increasing the porosity. Both the critical difference temperature (Delta T-c) and residual strength of high porosity ceramics were higher than those of low porosity ceramics. These improvements can be attributed to the pores in the specimens which relax the thermal shock stress and arrest the propagation of microcracks effectively, which is confirmed by XRD analysis of specimens which encountered different thermal shock temperature difference. (c) 2007 Published by Elsevier Ltd.