An automated microtechnique has been developed that Permits a rapid, reproducible determination of the Flory-Huggins chi interaction parameters for poly (vinyl chloride) plasticizer systems. It is a modification of the Anagnostopoulos method of determining an apparent melting temperature of a poly(vinyl chloride) (PVC) particle in excess plasticizer. A microscope equipped with a photodiode sensor is used to measure changes in the light transmitted through a plasticizer sample containing a PVC particle as the temperature is increased at a fixed rate, either 0.2 or 1.0-degrees-C/min. Data acquisition is done by computer so that minimal operator assistance is required. The apparent melting region is characterized by a sigmoidal change in the light transmitted through a fixed sample area. This curve allows an accurate, reproducible definition of the apparent melting temperature from which the chi parameter is easily derived. The values obtained for the interaction parameter of PVC with four plasticizers chosen from the phthalate and phosphate families are in good agreement with general trends of solvent quality. Separate experiments demonstrated that the overall transmittance profile reflects changes in both the size and the optical clarity of the PVC particle during heating. This leads to added features in the profile that reflect important diffusion and swelling characteristics for a given system.